Politici de confidentialitate
• Certificare completă TIA 6A și ISO/EN/CENELEC EA • Precizie – Verificat ETL conform TIA 1152-A/ IEC 61935-1 Nivelul IIIe 500 MHz
• Cel mai puternic și rapid certificator de cabluri de date din cupru și fibră optică • va testa și salva o legătură Cat6A în 7 secunde și certifică legături până la Cat8.1 și Cat8.2, inclusiv măsurători TCL și dezechilibru de rezistență • Timp de testare de 7 secunde • Cel mai rapid certificator din lume compatibil cu cloud • Adaptoare de legătură permanentă VisiLINQ™ • Navigare în proiect în cloud
• VDV II performs standard tests for copper cabling• Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing• Wiremap for Miswires, Split Pairs, Shorts and Opens• Analog Tone Generator• Voltage Protection• Shielded Cable Testing• Single Screen Results
• Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing• Wiremap for Miswires, Split Pairs, Shorts and Opens• Analog Tone Generator• Voltage Protection• Shielded Cable Testing• Single Screen Results• Larger 2.9" Display • Backlight • Hub Blink • Cable Length • Distance to Open
• Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing• Wiremap for Miswires, Split Pairs, Shorts and Opens• Analog Tone Generator• Hub Blink • Cable Length • Distance to Open / Short (TDR) • PoE Detection with Voltage Information • Media Service Detection • Ethernet Detection with Network Rate and Duplex Information
• Full Gigabit bi-directional load testing• Additional Ethernet troubleshooting capabilities• Wiremapping by pin as well as pair• Reporting of test results• Load test through hubs and switches
• Suitable for both copper and fibre• Full Gigabit bi-directional load testing• Additional Ethernet troubleshooting capabilities• Wiremapping by pin as well as pair• Reporting of test results• Load test through hubs and switches
• Cartografiere avansata a retelei folosind TDR• Efectuarea testului de performanta Gigabit conform standardului IEEE802.3ab• Generarea automata de rapoarte in format PDF.• Incarcarea rapoartelor pe stick USB direct, fara necesitatea utilizarii unui PC/Laptop.
• Generation of wiremaps• Length measurement• Recognition of PoE and PoE+ voltage• Support of 10/100/1000 Ethernet• Automatical DHCP recognition• Variable Ping function for URL and IP adresses• Trace Route function
• WIFI: Display of numbers of access points, available SSIDs, channels used and signal strength• Generation of wiremaps• Length measurement• Recognition of PoE and PoE+ voltage• Support of 10/100/1000 Ethernet• Automatical DHCP recognition• Variable Ping function for URL and IP adresses
• Optical Fibre: Singlemode and Multimode SFP options• WIFI: Display of numbers of access points, available SSIDs, channels used and signal strength• Generation of wiremaps• Length measurement• Recognition of PoE and PoE+ voltage• Support of 10/100/1000 Ethernet• Automatical DHCP recognition• Variable Ping function for URL and IP adresses
• Endpoint LAN testing over copper • IPv4 , IPv6 • Advanced wiremap including length • Wiremap for cross-over cables (copper) • Wiremap for 2 pair copper cables • Wiremap for industrial cables • PoE detection• EDP/CDP/LLDP • VLAN support• 802.1x logon • Optical power indication
• Physical tests of the copper pairs• G.SHDSL Synchronisation tests• Measurement of G.SHDSL performance• Comparison with acceptance targets• ATM / EFM Encapsulation /Bonding• Up to 4 pairs G.SHDSL /G.SHDSLbis
• Tester retea LAN - Ideal Network SIGNALTEK NT• Testarea de performan?a Gigabit pe cabluri pasive ?i re?ele active• Genereaza rapoarte de testare la standardul IEEE 802.3ab• Simuleaza trafic de re?ea video VoIP / CCTV / Web/ IP• Teste viteza de conectare, ID port, ping, trace route, IPv4 / IPv6• Testarea avansata PoE / PoE +
Produse obsolete ( * scoase din uz )
• Frequency range of 350 MHz• LAN cable certification to ISO Class E / Category 6 standard• Fast test speeds - 11-second Class D/Cat 5e and 14-second Class E/Cat 6 autotest times that include full graphical data storage• Patented test method - certify with off-the-shelf patch cords eliminating the need for expensive permanent link adapters• Unique FiberTEK® FDX modules - fastest and easiest fibre certification• DualMODE function - certify to two different standards with one press of the Autotest button• Maximum reporting power with the new IDEAL DataCENTER (IDC) software• • Enormous memory capacity - save an astonishing 1,700 ISO Category 6 / Class E results with graphs
• Frequency range of 1000 MHz• LAN cable certification to ISO Class Fa / Category 7a (1000MHz) standard.• Fast test speeds - 11-second Class D/Cat 5e and 14-second Class E/Cat 6 autotest times that include full graphical data storage• Patented test method - certify with off-the-shelf patch cords eliminating the need for expensive permanent link adapters• Unique FiberTEK® FDX modules - fastest and easiest fibre certification• DualMODE function - certify to two different standards with one press of the Autotest button• Maximum reporting power with the new IDEAL DataCENTER (IDC) software• Enormous memory capacity - save an astonishing 1,700 ISO Category 6 / Class E results with graphs
• Frequency range of 500 MHz• LAN cable certification to ISO Class EA / Category 6A standard• Fast test speeds - 11-second Class D/Cat 5e and 14-second Class E/Cat 6 autotest times that include full graphical data storage• Patented test method - certify with off-the-shelf patch cords eliminating the need for expensive permanent link adapters• Unique FiberTEK® FDX modules - fastest and easiest fibre certification• DualMODE function - certify to two different standards with one press of the Autotest button• Maximum reporting power with the new IDEAL DataCENTER (IDC) software• Enormous memory capacity - save an astonishing 1,700 ISO Category 6 / Class E results with graphs
• Endpoint LAN testing over copper • IPv4 , IPv6 • Advanced wiremap including length • Wiremap for cross-over cables (copper) • Wiremap for 2 pair copper cables • Wiremap for industrial cables • PoE detection
• Endpoint LAN testing over copper • IPv4 , IPv6 • Advanced wiremap including length • Wiremap for cross-over cables (copper) • Wiremap for 2 pair copper cables • Wiremap for industrial cables • PoE detection• EDP/CDP/LLDP • VLAN support
• Gigabit Ethernet transmission tester with single copper port, optical port• One touch to run multiple tests - unattended• Y.1564 (NetSAM) and RFC2544• SLA-Tick (Service Level Agreement) and BERT• Multi service (stream) test• Simultaneous IPv4 and IPv6 support• QinQ, Multiple VLAN and MPLS