FSH-B1 Distance to Fault Measurement For FSH313/323/626 and FSH3-TV only. Requires FSH-Z2 or FSH-Z3.
FSH-K1 Remote Control Software (RS-232)
FSH-K2 Vector Reflection/Transmission Measurements For FSH313/323/626, FSH3-TV only
FSH-K3 Receiver Mode
FSH-K4 3GPP FDD Code Domain Power BTS/Node B Measurement For FSH323 Only.
FSH-Z1 Average Power Sensor 10 MHz to 8 GHz, 200 pW to 200 mW
FSH-Z2 VSWR Bridge & Power Divider Includes open, short load calibration standards. For models with tracking generator only.
FSH-Z3 VSWR bridge with DC bias and bypass switch 10 MHz to 6 GHz, 50 Ohms, includes open, short, load for calibration. For FSH626 only.
FSH-Z14 Directional Power Sensor 25 MHz to 1 GHz, 30 mW to 120 (300) W
FSH-Z44 Directional Power Sensor 200 MHz to 4 GHz, 30 mW to 120 (300) W
FSH-Z18 Average Power Sensor 10 MHz to 18 GHz, 200 pW to 200 mW
FSH-Z20 Cable for option FSH-B1 1 m, male/female Type-N.
FSH-Z21 12VDC Car Adapter
FSH-Z22 Serial to Parallel Interface Converter Interface converter for Deskjet, Laserjet, Epson FX, Postscript printers.
FSH-Z25 Soft Carrying Bag
FSH-Z26 Hard Carry Case
FSH-Z32 Spare Battery Pack
FSH-Z33 Spare AC Adapter
HZ-15 Probe set for E and H nearfield emissions
HZ-16 Preamplifier 3 GHz, 20 dB, for HZ-15

More products Rohde & Schwarz

R&S HAMEG HMC8012 DIGITAL MULTIMETER

• Basic accuracy: 0.015 % (DC)
• 5�-digit display (480 000 counts)
• Simultaneous display of three measurement functions, e.g. DC + AC + statistics
• Measurement rate: up to 200 values/s

RF SIGNAL GENERATOR 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)

HANDHELD CABLE & ANTENNA ANALYZER 100 KHZ..3.6 GHZ/ 8 GHZ ROHDE & SCHWARZ ZVH

• 100 kHz to 3.6 GHz or 8 GHz Frequency range
• reflection measurement
• distance-to-fault measurement
• one-port cable loss measurement
• Optional Spectrum Analysis, Power Meter, Spectrogram, Transmission Measurement

DIGITAL OSCILLOSCOPE 4 X 2GHZ ROHDE & SCHWARZ RTO1024

• 2 GHz bandwidth
• 4 analog channels
• 10 GSa/s sample rate on each channel

RF USB POWER METER USB 10 MHZ..18 GHZ ROHDE & SCHWARZ NRP-Z22

• 10 MHz to 18 GHz
• -57 dBm to +33 dBm (2 nW to 2 W)
• 90 dB dynamic range for CW and modulated signals

HANDHELD TV SIGNAL ANALYZER 100 KHZ..3.6/ 8 GHZ ROHDE & SCHWARZ ETH

• TV, spectrum and network analyzer in a single box
• Frequency range up to 3.6 GHz or 8 GHz
• High-precision demodulator (MER typ. 45 dB)

PORTABLE SPECTRUM ANALYZER 9 KHZ..3.6 GHZ ROHDE & SCHWARZ FSH4

• 9 kHz to 3.6 GHz Frequency range
• 100 Hz to 3 MHz RBW
• <-141dBm sensitivity, with preamp <-161 dBm

PORTABLE SPECTRUM ANALYZER 10 MHZ..18 GHZ ROHDE & SCHWARZ FSH18

• 10 MHz to 18 GHz Frequency range
• 100 Hz to 1 MHz RBW
• 10 Hz to 1MHz VBW

TV SPECTRUM ANALYZER 100 KHZ..3 GHZ ROHDE & SCHWARZ FSH3-TV

• Measurement functions for analog and digital TV signals
• Full-fledged spectrum analyzer
• Combined video/ASI output
• Compact and robust housing

RF USB POWER METER USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals