True universal power sensor for a vast number of applications
10 MHz to 18 GHz
-47 dBm to +42 dBm (20 nW to 15 W)
89 dB dynamic range for CW and modulated signals
Innovative three-path diode power sensor with enhanced inter-range performance
Continuous average, burst average, timeslot average, time gating and trace mode supported (video bandwidth 100 kHz)
Automatic burst detection and acquisition
Up to 1500 measurements/s (buffered mode)
Low sensitivity to harmonics

More products ROHDE and SCHWARZ

VECTOR SIGNAL GENERATOR 9 KHZ..3.2 GHZ/ 6 GHZ ROHDE & SCHWARZ SMBV100A

• 9 kHz to 3.2 GHz or 6 GHz Frequency range CW mode
• 1 MHz to 3.2 GHz or 6 GHz Frequency range I/Q mode
• > +18 dBm high output level
• up to120 MHz Wide RF signal bandwidth with internal signal generation
• >500 MHz Maximum RF bandwidth of I/Q modulator

R&S RTO2000 OSCILLOSCOPE

• Quickly find signal faults with 1 million waveforms/s
• 2 Gsample deep memory to analyze long sequences
• Up to 16-bit vertical resolution
• Multi-channel spectrum analysis

PORTABLE SPECTRUM ANALYZER 100 KHZ..3 GHZ ROHDE & SCHWARZ FSH3

• 100 kHz to 3 GHz Frequency range
• 100 Hz to 1 MHz RBW
• 10 Hz to 1MHz VBW

RF USB POWER METER USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals

VECTOR SIGNAL GENERATOR 100 KHZ..3 GHZ/ 6 GHZ ROHDE & SCHWARZ SMJ100A

• 100 kHz to 3 GHz or 6 GHz Frequency range
• 200 MHz RF bandwidth IQ modulator
• - 133 dBc Very low SSB phase noise

MICROWAVE SIGNAL GENERATOR 100 KHZ..22 GHZ/ 43.5 GHZ ROHDE & SCHWARZ SMF100A

• 1 GHz to 22 GHz or 43.5 GHz Frequency ranges
• 100 kHz to 1 GHz Optional Frequency Extension
• +25 dBm Very high output power

R&S ESW EMI TEST RECEIVER

• Ultrafast measurements with FFT-based time domain scan
• Preselection with selectable highpass filters and notch filters for the ISM bands
• EMI test receiver and signal and spectrum analyzer in a single box

DIGITAL OSCILLOSCOPE 4 X 1 GHZ ROHDE & SCHWARZ RTO1014

• 1 GHz bandwidth
• 4 analog channels
• 10 GSa/s sample rate on each channel

SIGNAL SPECTRUM ANALYZER 20 HZ..3.6/ 7/ 13.6/ 30/ 40 GHZ ROHDE & SCHWARZ FSV

• 20 Hz to 3.6 / 7 / 13.6 / 30 / 40 GHz Frequency range
• 40 MHz analysis bandwidth
• 0.4 dB level measurement uncertainty up to 7 GHz

RF SIGNAL GENERATOR 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)