The DT-421 is a converter from transport streams to IP. It extracts signals from up to 4 TS-ASI inputs to distribute them in a network Ethernet. Each input TS is encapsulated inside an IP stream with an address and a destination port defined by the user. It is configured and controlled by means of the control module DT

TS INPUT	4 x DVB-ASI. BNC Female connector 75 ? (108 Mbps maximum per input)
IP OUTPUT	Ethernet 100/1000 Mbps. RJ45 connector.
IP STREAMS Communication Protocol Transmission methode Payload	UDP or RTP/UDP. MULTICAST. 7 MPEG-2 packets.
CONFIGURATION AND POWER SUPPLY	Via the DT-800 Control and Power Module. Control can be made remotely from a PC

Recommended options

DT-421-M	IP Streamer. ASI-TS inputs, IP output (MPTS)
DT-421-S	IP Streamer. ASI-TS inputs, IP output (SPTS)

DT-800B	Control unit and power supply.
DT-802	Control unit and redundant power supply modules.
DT-900	Rack and wall mounted structure.
DT-900B	Rack mounted structure.
DT-901	Empty module plates..
DT-902B	Power CAM modules for smart cards..
CC-043	Supply and control cable with 3 connexions for DT-800B (included)
CC-044	Supply and control cable with 4 connexions for DT-800B (included)
CC-143	Supply and control cable with 3 connexions for DT-802 (included)
CC-144	Supply and control cable with 4 connexions for DT-802 (included)
OP-XXX-V	Output in the range 170-650 MHz for modules with DVB-T..
OP-800-P	Option required to use DT-800B with 3 x DT-730 modules
OP-212-D	Dual independent output for DT-212B
OP-504-S	TS-ASI output option for DT-504B

	RECEIVERS WITH ASI-TS OUTPUT
DT-302	Dual DVB-S/S2 receiver with CAM, ASI-TS output.
DT-312	Dual DVB-T receiver, ASI-TS output.
DT-324-M	IP receiver to ASI-TS output (MPTS).
DT-324-S	IP receiver to ASI-TS output (SPTS).

	IP STREAMERS
DT-421-M	IP Streamer. ASI-TS inputs, IP output (MPTS)
DT-421-S	IP Streamer. ASI-TS inputs, IP output (SPTS)

	COMBINERS - AMPLIFIERS
DT-700	4x1 quadruple DVB-T combiner .
DT-710	8 input DVB-T combiner with a 117 dBuV (+10 dBm) one single output.
DT-722	4 input DVB-T combiner with a 129 dBuV / 250 mW (+22 dBm) one single output.
DT-730	DVB-T amplifier with a 137 dBuV / 1 W (+30 dBm).
DT-610	Optical transmitter module
DT-620	Optical receiver module

More products PROMAX

TRANSMODULATOR DVB-S/S2 -> DVB-T PROMAX DT-232

• DVB-S/S2 FI INPUT: 2 independent DVB-S/S2 IF inputs
• RF OUTPUT: 2 independent combined DVB-T multiplexes
• interface for Conditional Access Module (CAM)
• PID Filtering Table up to 32 PID

ANALOGUE TV VIDEO SIGNAL PATTERN GENERATOR PAL/ NTSC/ SECAM PROMAX GV-898+/ GV-798+

• PAL / PAL60 / SECAM / NTSC Multistandard
• GV-898+ : Vestigial Side Band Modulation - VSB
• GV-798+ : Double Side Band Modulation - DSB
• YPbPr outputs
• 4:3, 16:9 & 14:9 formats (WWS signals)
• NICAM / Zweiton sound
• RS-232 remote operation

COFDM DVB-T COMBINER & SPLITTER & DISTRIBUTOR PROMAX TD-500

• two identical internal modules including 4 inputs and 1 output or 1 input and 4 outputs
• DVB-T combinator and distributor to be assembled in a 19-inches 1U-height rack
• FREQUENCY RANGE: 45 MHz to 875 MHz

WIRELESS BAND DOWN-CONVERTER5.7..5.8 GHZ -> 1.5..1.6 GHZ PROMAX CV-589

• down converter for the 5.7 to 5.8 GHz frequency range to 1500 to 1600 MHz
• Converts signals from ISM 5.8 GHz to IF satellite band
• Supply from the signal level meter

RF POWER DVB-T AMPLIFIER COFDM SIGNAL 1W 30DBM PROMAX DT-730

• FREQUENCY BANDS: UHF from 470 MHz ~ 862 MHz
• 1 W RF power amplifier for COFDM signals
• both for single carrier or multicarrier system
• provides an amplified output of 30 dBm (137 dBµV)
• preserves the original signal quality and maintains a low noise levels

CASSETTE RECORDER TRAINING SYSTEM PROMAX EG-833

• Input section
• Recording process section
• Playback process section
• Output section
• Noise reduction systems: Dolby© B and C
• Control system

TRANSMITTER CONVERTER DVB-T -> OPTICAL FIBER PROMAX DT-610

• RF INPUT Frequency margin: From 470 to 862 MHz, From 50 to 1000 MHz(other options)
• FO OUTPUT Wavelength: 1550 ±20 nm (other wavelength as option)
• Fibre: 9/125, SMF28 or equivalent
• Connector: SC/APC
• optical links over distances up to 20 km

PROMAX PROLITE-40B OPTICAL FIBER FUSION SPLICER

• Automatic fusion splicing on 3 axis (X,Y, Z)
• Maximum accuracy
• Fibre aligning by means of core aligning method
• Single or simultaneous axis view.
• Fibre core can be display clearly.
• 5.7" colour LCD display.
• Temperature and atmospheric pressure indicators.
• Auto check quality of cleaved end face.

CATV CABLE NETWORK ANALYZER PROMAX-4

• measure the basic parameters to determine the quality of the signal in a CATV system
• different options depending on the needs
• one hand operation instrument with direct reading of the measurement
• illuminated LCD screen
• audio demodulator together with an speaker
• exchangeable input connector so to avoid damaging the instrument

SATELLITE TRANSMODULATOR QPSK -> COFDM DVB-T PROMAX MO-162/163

• QPSK INPUT: 950 - 2150 MHz / -65 dBm to -25 dBm
• MPEG-2 TS INPUT: 2x DVB-ASI, 75 ? BNC female connector
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475 - 875 MHz (45 - 875 MHz for MO-163)