MPEG-2 Transport Stream Recorder, Processor, Player Promax TG-140

• test the frequency response of an entire television system prior to having the antennas or the Headend installed
• can be used for the test and certification of TV and satellite wiring, headend trouble shooting
• 1050 / 1575 / 2100 MHz L BAND TEST PILOTS
• 537.5 MHz UHF TEST PILOT

 

• 850, 1300, 1310, 1490, 1550 nm CALIBRATED WAVELENGTH
• Pocketsize, large LCD display, easy to use
• Measure six wavelengths through a single connector
• Direct loss measurements units in dB
• Absolute power measurement units in dBm and W (or µW)
• PC software available for testing data collection and report generation

 

• integrated DVB-T tuner that allows the TS capture in real time
• record a transport stream continuously for several minutes and then play it back
• work in the field where maybe it is not possible to find electricity available
• ASI Transport Stream Input: Maximum data rate 40 Mb/s
• RF Input: DVB-T from 35 to 100 dBµV
• ASI & SPI parallel Transport Stream Output: Maximum data rate 32 Mb/s
• Storing Capacity: Memory card 4 GB, 20 minutes approx (20 Mbits/s)

 

• FREQUENCY MARGIN: From 50 MHz (C-2) to 860 MHz (C-69)
• INPUTS: 4 inputs Female BNC, 75 ? impedance
• RF OUTPUT: 1 female BNC output, 75 ? impedance
• output designed to mix output RF signals of COFDM modulators and transmodulators with DTT channels

 

• Detection of radio signals received in a specific location, in the radio as well as in the digital and analogue television bands
• Identification of each one of the signals received
• Permanent monitoring of a variable area of the radio spectrum, carrying out an analysis of the detected variation
• digital radio (DAB), terrestrial digital television (TDT) according to the DVB-T (COFDM modulation) standard, FM-RDS radio and analogue TV signals

 

• compliant with China's national standard specification for digital terrestrial broadcasting GB20600-2006
• MPEG-2 TS INPUTS: 2x ASI, 1xSPI
• IF OUTPUT: 36 MHz, 50 ? BNC female connector
• RF OUTPUT: 45-875 MHz, 50 &8486; BNC female connector
• MODULATION: TDS-OFDM, 1 or 3780 subcarriers

 

• install, configure, adjust, modify and analyse any kind of actual MATV and SMATV installation
• high definition (HD) terrestrial television receiver and satellite television receiver is provided
• high definition and video compression (MPEG-2 and MPEG-4)
• DVB-S2, transmodulation, TDT Premium, IPTV, Fiber Optics, FTTx
• DTT signals propagation, Gap-Fillers, transport stream (TS) creation
• familiarity with PID, PMT NID
• configuration and testing of modulation parameters

 

• RP-100: 2 generated carrier pilots
• RP-100Q: 2 generated carrier pilots
• 5 MHz to 100 MHz Frequency Range
• 90 to 110 dBµV (30-50 dBmV) adjustable in steps of 1 dB output level
• select independent frequencies for each pilot
• internal rechargeable battery

 

• 4 PILOT CARRIERS: 85 MHz, 750 MHz, 1000 MHz, 2150 MHz
• Selectable and independent carrier level for each one: from 75 to 105 dBµV
• LED indicators for each carrier output level
• 13, 18 V and 22 kHz signal detection.
• Power supply from the LNB or external DC supply.
• Ergonomic and compact format

 

• Antenna Trainer fully configurable trainer, based on a structure with whiteboard panels
• install, configure, adjust, modify and analyse any kind of actual MATV and SMATV installation
• MATV (Master Antenna Television) Digital
• SMATV (Satellite Master Antenna Television) Digital