The DT-710 is a combiner with 8 inputs and an output designed to mix output RF signals of COFDM modulators and transmodulators with DTT channels available in the area.

The system provides an amplified output of 114 dBµV (+6 dBm) frequently required in SMATV systems.

This is a solution of higher quality than those that often use Z connections, given that preserves better the original quality and maintains lower noise levels.

FREQUENCY MARGIN	From 50 MHz (C-2) to 860 MHz (C-69)
INPUTS	8 inputs Female BNC, 75 ? impedance
RF OUTPUT Maximum output level	1 female BNC output, 75 ? impedance 1 channel at 119 dBµV 2 channels at 116 dBµV 4 channels at 113 dBµV 8 channels at 110 dBµV 16 channels at 107 dBµV
CONFIGURATION AND POWER SUPPLY	Through the DT-800 control and power supply unit. Control can be done remotely from a PC.

Recommended options

DT-800B	Control unit and power supply.
DT-802	Control unit and redundant power supply modules.
DT-900	Rack and wall mounted structure.
DT-900B	Rack mounted structure.
DT-901	Empty module plates..
DT-902B	Power CAM modules for smart cards..
CC-043	Supply and control cable with 3 connexions for DT-800B (included)
CC-044	Supply and control cable with 4 connexions for DT-800B (included)
CC-143	Supply and control cable with 3 connexions for DT-802 (included)
CC-144	Supply and control cable with 4 connexions for DT-802 (included)
OP-XXX-V	Output in the range 170-650 MHz for modules with DVB-T..
OP-800-P	Option required to use DT-800B with 3 x DT-730 modules
OP-212-D	Dual independent output for DT-212B
OP-504-S	TS-ASI output option for DT-504B

	RECEIVERS WITH ASI-TS OUTPUT
DT-302	Dual DVB-S/S2 receiver with CAM, ASI-TS output.
DT-312	Dual DVB-T receiver, ASI-TS output.
DT-324-M	IP receiver to ASI-TS output (MPTS).
DT-324-S	IP receiver to ASI-TS output (SPTS).

	IP STREAMERS
DT-421-M	IP Streamer. ASI-TS inputs, IP output (MPTS)
DT-421-S	IP Streamer. ASI-TS inputs, IP output (SPTS)

	COMBINERS - AMPLIFIERS
DT-700	4x1 quadruple DVB-T combiner .
DT-710	8 input DVB-T combiner with a 117 dBuV (+10 dBm) one single output.
DT-722	4 input DVB-T combiner with a 129 dBuV / 250 mW (+22 dBm) one single output.
DT-730	DVB-T amplifier with a 137 dBuV / 1 W (+30 dBm).
DT-610	Optical transmitter module
DT-620	Optical receiver module

More products PROMAX

MODULATOR ASI-TS MPEG -> ISDB-T/TB PROMAX MO-370

• -T and ISDB-TB modulator contained in a 19" 1U chassis
• inputs can be used to modulate the COFDM signal
• TS MPEG INPUT: 2x ASI
• RF OUTPUT: 45-875 MHz (1 Hz steps), approx. 80 dBµV power

DIDACTIC TRAINING SYSTEM FOR ANALOGUE COMMUNICATIONS PROMAX EC-696

• MODULATIONS: AM, FM, PWM, FDM
• INPUTS / OUTPUTS: Generator, microphone / Oscilloscope, headphones
• TRANSMISSION: Two-wire, coaxial, Fibre Optics, Infra Red & Radio

SFN/MFN MODULATOR DVB-ASI/ SPI -> DVB-T/ DVB-H PROMAX MO-180

• MPEG-2 TS INPUT: 2xDVB-ASI 75 ?, 1xDVB-SPI LVDS DB-25
• RF Output: 45 - 875 MHz
• CONTROL INTERFACE: Ethernet RJ-45 connector (SNMP compatible)
• 10 MHz GPS reference input

WIRELESS BAND DOWN-CONVERTER5.7..5.8 GHZ -> 1.5..1.6 GHZ PROMAX CV-589

• down converter for the 5.7 to 5.8 GHz frequency range to 1500 to 1600 MHz
• Converts signals from ISM 5.8 GHz to IF satellite band
• Supply from the signal level meter

CATV/ SMATV COAXIAL CABLE TEST SIGNAL GENERATOR 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

RECEIVER CONVERTER OPTICAL FIEBR -> DVB-T RF PROMAX DT-620

• OPTICAL INPUT: From 1100 to 1600 nm
• RF OUTPUT: From 470 MHz to 862 MHz
• optical SC input and an RF type BNC output
• suitable for optical links up to 40 km away

DIGITAL TERRESTRIAL RECEIVER DVB-T -> DVB-ASI TRANSPORT STREAM PROMAX DT-312

• RF INPUT: 2 DVB-T independent inputs
• TS OUTPUT: 2 independent double DVB-ASI outputs
• CAM and ASI output

PROMAX RANGER MINI

• Aiming terrestrial antennas and satellite dishes
• analyzing DOCSIS and installing optical fibre
• The cost effective all-in-one compact analyzer for RF, CATV and optical fibre

PROMAX ATLAS-IP MULTICAST AND UNICAST IPTV ANALYZER WITH SRT PROTOCOL SUPPORT

• ATLAS IP is a multicast and unicast IPTV analyzer, with SRT protocol support and optionally ST 2110
• It includes SD-SDI, HD-SDI, and 3G-SDI over RF (and, on demand, over optical fiber).

PROMAX OP-040B OPTICAL FIBER SPLICING KIT

• - Kevlar scissors
• - Fibre disposal unit
• - Isopropyl alcohol cleaning wipes (x50)
• - Connector cleaner
• - SC/APC pre-polished connectors
• - Mechanical splicer
• - Mini Visual Laser Source
• - LED headlamp
• - Transport and storage suitcase