The MD 9250 is the first Clamp Meter that meets overvoltage category CAT IV 1000 V. MD 9250 is a high quality clamp meter specially designed for single-hand operation, built-in measuring functions; TRMS AC/DC (current, voltage), capacitance, temperature and full range resistance makes this instrument an ideal tool for the most demanding applications in the industrial sector. The large jaws capacity of (max. 55 mm) in diameter allows AC/DC current measurements up to 2000 A. High resolution and accuracy, 2-line LCD display fast data acquisition and transfer (via optical interface), non-contact voltage detection, and auto-check function are highlights of the instrument.

TEST FUNCTIONS

TRMS AC, DC voltage measurement;
TRMS AC, DC current measurement;
Capacitance measurement;
Resistance measurement;
Diode test;
Frequency measurement;
Electric field detection;
Continuity test (acoustic signaling);
Temperature measurement.

TECHNICAL DATA

Dimensions (w x h x l): 97 x 43 x 264 mm

Mass (without accessories): 608 g

Standard accessories

MD 9250 Standard set

Current clamp MD 9250
Test lead with probe, 2 pcs
Thermocouple probe, type K
Pouch
1.5 V battery, type AAA, 2 pcs
Instruction manual
Warranty

More products METREL

TRAINING PLATFORM FOR STUDY INDUSTRIAL AND RESIDENTIAL INSTALLATIONS METREL MA 2067 DEMO

• Complete representation of a real low voltage installation in industrial and residential areas
• sockets,
• electrical loads,
• lightning,
• earthing systems for TT, TN and IT types of installations.
• 65 different measurements according to IEC/EN61557 are supported.
• Fault situation simulation switches can generate 19 errors or combination of these
• Detailed instruction manual with profound explanation of all typical measurements.

POWER CURRENT CLAMP METER METREL MD 9240

• DC and TRMS AC voltage up to 600 V
• TRMS AC current measurement up to 1000 A
• Resistance measurement
• Continuity test
• Frequency measurement
• Contact temperature measurement
• Power factor
• Power (W, VA, Var)

METREL MI3100 ELECTRICAL INSTALATION TESTER EUROTEST EASI

• DC insulation resistance,
• PE conductor continuity test,
• Line and Loop resistances with Fuse characteristics inside the instrument,
• RCD test with Trip lock function,
• phase sequence in 3-phase systems,
• on-line voltage monitor.

PEN TYPE NON-CONTACT VOLTAGE DETECTOR METREL MD115

• 12 V � 1000 V AC measurement range
• Optical and vibrating indication
• CAT III / 1000 V overvoltage protection

METREL MI3122 SMARTEC Z RCD LOOP/ LINE IMPEDANCE SHORT-CIRCUIT CURRENT TESTER

• Loop impedance / prospective fault current
• Line impedance / prospective short-circuit current
• Built-in fuse characteristics for quick evaluation of measuring results
• RCD tests (trip out time, contact voltage, ramp test, Autotest)
• Testing on 1- and 3-phase systems
• Phase sequence test

CURRENT CLAMPMETER WITH POWER MEASUREMENTS METREL MD 9235

• TRMS AC, DC voltage measurement;
• TRMS AC current measurement;
• Resistance measurement;
• Frequency measurement;
• Continuity test (acoustic signaling);
• Power parameters measurement.

METREL MI3105 ELECTRICAL INSTALATION TESTER FOR INSULATION RESISTANCE, CONTINUITY, EARTH TEST MI 3105 EUROTEST XA

• insulation resistance,
• PE conductor continuity test,
• Line and Loop esistances with Fuse evaluation table built-in,
• RCD test with Trip lock function,
• phase sequence in 3-phase systems,
• on-line voltage monitor,
• 2-wire and 3-wire Earth resistance test with built-in battery operated generator,
• earth resistance test with Two Clamps method,
• Leakage Current test,
• test of Luminance with optional LUX meter probe

USUAL UNIVERSAL CURRENT CLAMP METER METREL MD 9225

• TRMS AC, DC voltage measurement;
• TRMS AC, DC current measurement;
• Capacitance measurement;
• Resistance measurement;
• Diode test;
• Frequency measurement;
• Continuity test (acoustic signaling);
• Temperature measurement.

METREL MI3250 PRECISION RESISTANCE MICROOHMMETER 10A

• Bidirectional resistance measurement from 0,1 µO up to 2000 O
• test current up to 10 A
• Highly efficient 10 A current source generates 10 A into 200 mO load for 15 min without overheating
• High overvoltage protection (CAT IV / 300 V)
• Custom limits can be set for PASS / FAIL evaluation of test result.
• 50 Hz / 60 Hz ripple detection and rejection.
• Instrument can be powered from mains or internal rechargeable battery.
• Up to 1000 test results with timestamp can be stored in internal memory.
• PC SW HVLink PRO enables downloading, review, analyses and printing of test results.

THREE-PHASE ACTIVE ADAPTER FOR TESTING POLARITY, DIFFERENTIAL LEAKAGE AND RCD'S METREL A1322

• All tests on 3-phase electrical equipment can be carried out, including live leakage test, power, polarity, RCD and Active polarity.
• Simple connection to the PAT/MACHINE tester with automatic detection.
• Simple test procedures, identical to single phase equipment.
• Test sequence for 3-phase tests are automatically set, based on entered test codes and input voltages.