MI 3125B is a lightweight, easy to use multifunctional installation safety tester. The ability to test B-type (DC sensitive) RCDs, integrated characteristics of fuses and RCDs, help screens, bright LEDs for PASS / FAIL evaluation of test results, online voltage monitor, compatibility with the PC SW EuroLink PRO are just some of distinctive features of the MI 3125B.

MEASURING FUNCTIONS

Insulation resistance with DC voltage
Continuity of PE conductors with 200 mA test current with polarity change
Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping
Line impedance
Loop impedance
Loop impedance with Trip Lock RCD function
TRMS voltage and frequency
Phase sequence
RCD testing (general and selective, type AC, A and B)
Earth resistance (3-wire method).

OTHER FEATURES

LED Pass/Fail indicators: two LED in-dicators for PASS / FAIL evaluation of test results are placed on both sides of the LCD
Help screens: instrument comes complete with built-in help screens for referencing on site.
Earth resistance measurement: instrument performs 3-wire earth resistance testing with two additional rods.
Built-in fuse tables: this unique feature allows automatic evaluation of the line / loop impedance compared to the regulations.
Online voltage monitoring: monitors all 3 voltages in realtime.
Upgradeable: if changes occur to the regulations, upgrades can be made to the firmware to keep the instrument up to date.
Polarity swap: automatic polarity reversal on continuity test.
Insulation range: wide range of insulation test voltages from 50 V to 1000 V, reading up to 1000 M?.
Trip Lock function: Zs (RCD) function performs a loop impedance test without tripping the RCD.
Multisystem testing: tests on single and multiphase TT and TN systems.
Built-in charger & rechargeable batteries: unit has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries.
RCD auto: automated RCD testing procedure significantly reduces test time. B type RCD testing is supported.
PC SW EuroLink PRO included in the the standard set enables downloading of test results and parameters and creation of test reports.

SOFTWARE

PC SW EuroLink PRO is a strong creating tool of professional Visual Inspection Report and Testing Result Report.

TECHNICAL DATA

Dimensions: 140 x 80 x 230 mm

Mass: 1.0 kg

Standard accessories

MI 3125B Standard set MI 3125B

Instrument EurotestCOMBO
Set of carrying straps
Test lead, 3 x 1.5 m
Schuko-plug test cable, 1.5 m
Test probe, 3 pcs (blue, black, green)
Crocodile clip, 3 pcs (blue, black, green)
Power supply adapter + 6 NiMH rechargeable batteries, type AA
USB cable
RS232 - PS/2 cable
PC SW EuroLink PRO
Short instruction manual
Instruction manual and handbook on CD
Calibration certificate

More products METREL

METREL MI3121 INSULATING RESISTANCE MEGOHMMETER AND CONTINUITY

• Very large LCD display with bargraph and backlight
• High measuring range of up to 30 G? with test voltage from 50 V to 1000 V
• Fast and reliable continuity tests with automatic polarity reversal
• Voltage and frequency measurements
• Preprogrammed limits
• PASS/FAIL evaluation of result
• Bright GREEN/RED indicators provides visual evaluation of results
• Suited for testing on CAT IV installations

METREL MI3121 INSOLATION RESISTANCE MEGOHMMETER 2500V AND CONTINUITY METREL MI 3121H SMARTEC 2.5KV

• Insulation resistance up to 100 GO with DC voltage up to 2.5 kV;
• PI, DAR calculation;
• Continuity of PE conductors with 200 mA test current and polarity change;
• Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping;
• TRMS voltage and frequency.

METREL MI3295 STEP CONTACT VOLTAGE MEASURING TEST SYSTEM

• Measurement of step voltage and contact voltage.
• Measurement of earthing resistance with resolution of 1 m?.
• Measurement of specific earth resistance.
• High current of up to 50 A and effective suppression of noise
• Excellent immunity even against changing earth currents.
• Autonomous Step Voltage meter: no need for long voltage leads.
• Downloads test results directly to the PC with the help of the professional PC SW package HVLink

METREL MI3103 GIGAOHM INSULATING RESISTANCE MEGOHMMETER 1KV AND CONTINUITY TESTER

• Insulation Resistance: Three different test voltages (250, 500 and 1000 V)
• Continuity: 200 mA measurement with automatic polarity change.
• RMS Voltage and Frequency
• Warnings are given if hazardous voltages are detected.
• Auto power-off.

METREL MI3201 TERAOHM 5KV INSULATION RESISTANCE MEGAOHMMETER 5000V

• Pre-set test voltages: 250V...5000V
• Automated testing - PI, DD, DAR calculations with automated resistance ranging (AR)
• Fault finding
• R(t) graph - Real time resistance against time graph plotting facility
• Faster testing - High 5 mA charging current quickly charges capacitive loads.
• Accurate
• Safe - High CAT IV, 600 V voltage protection

WINDING TRANSFORMER RESISTANCE MICROOHMMETER 2A METREL MI 3242

• Bidirectional resistance measurement from 1 µO up to 199,9 O
• test current up to 2 A
• High overvoltage protection (CAT III / 600 V)
• Internal protection cicuit
• 50 Hz / 60 Hz ripple detection and rejection.
• more than 800 measurements of 500 mO load 8 2 A test current & 15 s measurement duration
• Pre-programmed limits with PASS/FAIL evaluation of measurement result
• Up to 1500 test results with timestamp can be stored in internal memory.
• PC SW HVLink PRO enables downloading, review, analyses and printing of test results.

1000V VOLTAGE CONTINUITY TESTER METREL MD1050

• Voltage testing up to 1000 V
• Automatic AC/DC recognition
• Continuity buzzer and led to indicate resistances below 500 k?
• Phase & Rotating Field Test
• RCD trip testing
• Diode Test
• Auto Power Off

THREE-PHASE ACTIVE ADAPTER FOR TESTING POLARITY, DIFFERENTIAL LEAKAGE AND RCD'S METREL A1322

• All tests on 3-phase electrical equipment can be carried out, including live leakage test, power, polarity, RCD and Active polarity.
• Simple connection to the PAT/MACHINE tester with automatic detection.
• Simple test procedures, identical to single phase equipment.
• Test sequence for 3-phase tests are automatically set, based on entered test codes and input voltages.

METREL MI3125 ELECTRICAL INSTALLATION TESTER EUROTEST COMBO

• TRMS voltage and frequency
• Continuity
• Insulation resistance
• RCD testing (type AC and A)
• Fault loop / RCD Trip Lock impedance
• Line impedance
• Phase sequence

INDUSTRIAL CURRENT CLAMP METER FOR GENERAL USE METREL MD 9230

• DC and TRMS AC voltage up to 600 V
• DC and TRMS AC current measurement up to 1000 A and 800 A respectively
• Resistance measurement
• Continuity test
• Diode test
• Capacitance measurement