Metrel MI3305 OMEGAGT PLUS Electrical Safety Analyzer cf. IEC EN VDE standard

Code: Metrel MI3305 MI-3305 OMEGAGT-PLUS


 

Datasheet PDF, 0.59 Mb
 

Description

The innovative MI 3305 OmegaGT Plus is a highclass instrument intended for electrical safety testing of a wide range of portable electrical appliances, IT equipment, IEC cords and portable RCDs according to IEC/EN and VDE standards.

 

MEASURING FUNCTIONS

  • Continuity tests (200 mA, 4 A, 10 A, 25 A).
  • Insulation resistance.
  • Substitute leakage current.
  • Differential leakage current.
  • Touch leakage current.
  • IEC cord polarity test.
  • Leakage and load TRMS current measurement with current clamp.
  • Portable RCD testing.
  • HV Flash test.
  • Functional test.

 

OTHER FEATURES

  • Autosequencing: 24 pre-set autosequences and custom prepared autosequences speed up testing and ensure that no tests are missed.
  • Automated: automatic testing and PASS / FAIL evaluation of test results according to appropriate standard.
  • Project uploading: previous test data can be uploaded for fast retesting of the appliance.
  • Scan and test: optional barcoding sys-tem and PASS / FAIL barcode label printing make retesting quick and simple.
  • RFID: support for advanced RFID identification system.
  • Adaptable: tests both 230 V and 115 V appliances.
  • User friendly: large LCD screen, full QWERTY keyboard, help screens and warnings make the instrument an extremely easy to use.
  • Multitasking: instrument performs continuity tests with different test currents, 250 V and 500 V insulation tests, differential /substitute / touch leakage mesure-ments, functioanal and polarity tests.
  • Flash test: dielectic strength test after repair safety testing.
  • PRCD testing: instrument enables measurement of tripout time of portable RCDs.
  • Clamp leakage current measurement: quick measurement of leakage current with current clamps directly on power supply cable without discon-nection of appliance from mains.
  • Trend functionality: test results can be uploaded from PC to the instrument for comparison between old and new test results onsite.
  • Downloadable: up to 6500 test results with measuring parameters can be stored in two level memory and downloaded to the PC with the help of PC SW PAT Link PRO.
  • PC SW PAT Link PRO included in the standard set enables downloading, viewing, printing of test results and exporting of data to spreadsheet applications.
  • PC SW PAT Link PRO Plus enables advanced analysis of test results, data upload to the instrument for on site comparison of old and new results and creation of professional test reports.

 

SOFTWARE

  • PC SW PAT Link PRO included in the standard set enables downloading, view-ing, printing of test results and exporting of data to spreadsheet applications.
  • PC SW PAT Link PRO Plus enables ad-vanced analysis of test results, data upload to the instrument for on site comparison of old and new results and creation of professional test reports.

 

TECHNICAL DATA

Dimensions (w x h x l): 335 x 160 x 335 mm

Mass (without accessories): 8.4 kg

 

Standard accessories

MI 3305 Standard set MI 3305

  • Instrument OmegaGT Plus
  • Continuity / Leakage cable
  • PRCD cable
  • Flash cable
  • PC SW PATLink PRO
  • RS232 cable
  • USB cable
  • Crocodile clip, green
  • Crocodile clip, black
  • Test probe, green
  • Test probe, black
  • Test lead, green 1.5 m
  • Test lead, black 1.5 m
  • Instruction manual
  • Calibration certificate
 

More products METREL

METREL MI2150 INSTALLCHECK ELECTRICIANS INSTALLATION TESTER

• Wiring check
• DC insulation resistance
• Continuity test
• Line and Loop resistance
• RCD test
• Phase sequence
• Pass/Fail visual and audio presentation of results

 

METREL MI3250 PRECISION RESISTANCE MICROOHMMETER 10A

• Bidirectional resistance measurement from 0,1 µO up to 2000 O
• test current up to 10 A
• Highly efficient 10 A current source generates 10 A into 200 mO load for 15 min without overheating
• High overvoltage protection (CAT IV / 300 V)
• Custom limits can be set for PASS / FAIL evaluation of test result.
• 50 Hz / 60 Hz ripple detection and rejection.
• Instrument can be powered from mains or internal rechargeable battery.
• Up to 1000 test results with timestamp can be stored in internal memory.
• PC SW HVLink PRO enables downloading, review, analyses and printing of test results.

 

METREL MI2088 EARTH INSULATION TESTER

• Measurements on earthing and lightning protection systems include: standard 4-wire method, standard 4-wire method with current clamps and 2-clamp method without junctions disassembling.
• Specific earth resistance (soil resistance).
• DC insulation resistance measurement with test voltages from 50 V up to 1000 V in 10 V steps. Measuring range up to 30 GOhm.

 

METREL A1143 EURO Z 290 A LOW LINE AND FAULT LOOP IMPEDANCE TESTER

• High precision line impedance;
• High precision fault loop impedance;
• Contact voltage.
• Range widening: adapts the instruments to read from 0.1 m? up to 19.99 ?.
• Multi-system testing: works on both single phase and 3-phase systems (110 V to 440 V).

 

METREL MI2892 POWER MASTER CLASS A POWER QUALITY ANALYZER MI-2892

• Voltage: TRMS, peak, crest factor (4-channel)
• Current: TRMS, peak, crest factor (4-channel)
• Power (active, reactive, apparent)
• Power measurements fully compliant with IEEE 1459 (active, nonactive, fundamental, harmonic, load unbalance)
• Unbalance, flicker measurement
• Harmonic and interharmonic analysis up to 50th harmonics, THD measurement
• Energy (active, reactive, generated, consumed)
• Power quality analysis according to EN 50160 and IEC 61000-4-30 Class A

 

METREL MD9060 PROFESSIONAL HANDHELD DIGITAL PRECISION MULTIMETER MD-9060

• large 2-line 500.000 counts LCD display
• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 50nF..25mF Capacitance measurement;
• 500O..50MO Resistance measurement;
• Diode test;
• 5Hz..1MHz Frequency of digital signals measurement
• Temperature measurement(thermocouple type K included)

 

PEN TYPE NON-CONTACT VOLTAGE DETECTOR METREL MD115

• 12 V … 1000 V AC measurement range
• Optical and vibrating indication
• CAT III / 1000 V overvoltage protection

 

1000V VOLTMETER METREL MD1150

• Voltage testing up to 1000 V
• Automatic AC/DC recognition
• Continuity testing up to 2000 ?
• Phase & Rotating Field Test RCD fault test
• Diode Test
• Auto Power Off
• Data Hold
• LCD display with backlight

 

METREL MI3105 ELECTRICAL INSTALATION TESTER FOR INSULATION RESISTANCE, CONTINUITY, EARTH TEST MI 3105 EUROTEST XA

• insulation resistance,
• PE conductor continuity test,
• Line and Loop esistances with Fuse evaluation table built-in,
• RCD test with Trip lock function,
• phase sequence in 3-phase systems,
• on-line voltage monitor,
• 2-wire and 3-wire Earth resistance test with built-in battery operated generator,
• earth resistance test with Two Clamps method,
• Leakage Current test,
• test of Luminance with optional LUX meter probe

 

METREL MI2014 CABLE SCANNER LAN NETWORK & COAX CABLE TESTER

• easy to use LAN tester with wide variety of functions for fault finding
• troubleshooting on IT cabling connections
• TDR facility with adjustable NVP
• determination of distance to the fault
• cable length measurement
• pair determination in multi-pair cables
• crossed pairs,
• crosstalk,
• short-circuit,
• mismatched pairs,
• bad contacts,
• no shield etc..