The MD 9230 is a universal current clamp for measuring DC and TRMS AC voltages up to 600 V and DC and TRMS AC currents up to 1000 A. With a broad spectrum of measurement functions and features, it is an ideal tool for service companies and works electricians in the industrial sector.

TEST FUNCTIONS

DC and TRMS AC voltage up to 600 V
DC and TRMS AC current measurement up to 1000 A and 800 A respectively
Resistance measurement
Continuity test
Diode test
Capacitance measurement

TECHNICAL DATA

Dimensions (w x h x l): 78 x 40 x 227 mm

Mass (without accessories): 290 g

Standard accessories

MD 9230 Standard set

Current clamp MD 9230
2 test leads
Battery
Pouch
User manual
Warranty

More products METREL

METREL MI3295 STEP CONTACT VOLTAGE MEASURING TEST SYSTEM

• Measurement of step voltage and contact voltage.
• Measurement of earthing resistance with resolution of 1 m?.
• Measurement of specific earth resistance.
• High current of up to 50 A and effective suppression of noise
• Excellent immunity even against changing earth currents.
• Autonomous Step Voltage meter: no need for long voltage leads.
• Downloads test results directly to the PC with the help of the professional PC SW package HVLink

METREL MI2014 CABLE SCANNER LAN NETWORK & COAX CABLE TESTER

• easy to use LAN tester with wide variety of functions for fault finding
• troubleshooting on IT cabling connections
• TDR facility with adjustable NVP
• determination of distance to the fault
• cable length measurement
• pair determination in multi-pair cables
• crossed pairs,
• crosstalk,
• short-circuit,
• mismatched pairs,
• bad contacts,
• no shield etc..

METREL MI3200 TERAOHM HIGH VOLTAGE INSULATION TESTER 10KV

• Insulation resistance up to 10 T?
• DC Test voltage 500 V - 10 kV in step of 25 V
• The short circuit current is 5 mA
• Auto-calibation of measuring system
• Operates from mains or rechargeable supply
• Automatic discharge of capacitive loads
• Digital and bar graph results with date and time
• User friendly PC software with RS232 or USB isolated communication port

POWER CURRENT CLAMP METER METREL MD 9240

• DC and TRMS AC voltage up to 600 V
• TRMS AC current measurement up to 1000 A
• Resistance measurement
• Continuity test
• Frequency measurement
• Contact temperature measurement
• Power factor
• Power (W, VA, Var)

1000V VOLTAGE CONTINUITY TESTER METREL MD1050

• Voltage testing up to 1000 V
• Automatic AC/DC recognition
• Continuity buzzer and led to indicate resistances below 500 k?
• Phase & Rotating Field Test
• RCD trip testing
• Diode Test
• Auto Power Off

USUAL UNIVERSAL CURRENT CLAMP METER METREL MD 9225

• TRMS AC, DC voltage measurement;
• TRMS AC, DC current measurement;
• Capacitance measurement;
• Resistance measurement;
• Diode test;
• Frequency measurement;
• Continuity test (acoustic signaling);
• Temperature measurement.

METREL MI3125 ELECTRICAL INSTALLATION TESTER EUROTEST COMBO

• TRMS voltage and frequency
• Continuity
• Insulation resistance
• RCD testing (type AC and A)
• Fault loop / RCD Trip Lock impedance
• Line impedance
• Phase sequence

METREL MD9050 PORTABLE DIGITAL HIGH RESOLUTION MULTIMETER MD-9050

• High resolution and accuracy
• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 60nF..25mF Capacitance measurement;
• 600O..60MO Resistance measurement;
• Diode test;
• 5Hz..1MHz Frequency of digital signals measurement
• Temperature measurement(thermocouple type K included)

METREL MI3109 EUROTEST PV LITE PHOTOVOLTAIC ANALYZER TESTER FOR SOLAR PANELS SYSTEMS

• Measurements on DC side of PV installation:
• Voltage, current, power, energy;
• Uoc (Open Circuit Voltage) and Isc (Short Circuit Current);
• I - U curve of PV modules and strings;
• Irradiance;
• Module temperature.
• Measurements on AC side of PV installation:
• Voltage, current, power;
• Efficiency of PV module, inverter, PV system calculation.

METREL MI3108 EUROTEST PV PHOTOVOLTAIC ANALYZER AND ELECTRICAL INSTALLATION SAFETY TESTER FOR SOLAR SYSTEMS

• Measurements on DC side of PV installation:
• Voltage, current, power, energy;
• Uoc (Open Circuit Voltage) and Isc (Short Circuit Current);
• I - U curve of PV modules and strings;
• Irradiance;
• Module temperature.
• Measurements on AC side of PV installation (power quality):
• Voltage, current, frequency, power, PF, energy, harmonics;
• Efficiency of PV module, inverter, PV system calculation.