Megger BITE3 Battery Impedance Tester

Code: Megger BITE3 Biddle


 

Datasheet PDF, 0.45 Mb
           

Description

• Determines health of lead-acid cells up to 2000 Ah
• On-line testing with Pass/Warning/Fail calculations
• Measures impedance, interconnection resistance and cell voltage
• Windows CE operating system with 32 MB of memory
• Measures float and ripple currents
• Includes PowerDB LITE Management Software

 

The Megger BITE3 Battery Impedance Test Equipment determines the health of lead-acid cells up to 2000 Ah by taking measurements of the most important battery parameters. The BITE3 measures cell impedance, an internal ohmic test, cell voltage, intercell connection resistance and ripple current. And, for the first time in a battery instrument, the BITE3 measures float current and the harmonic content of the ripple current. There is even a built-in spectrum analyzer to show the harmonic content of the ripple current. It has firmware that can be upgraded through the Internet and supports multiple languages.

The BITE3 is one of the easiest instruments to use. Its measurements, along with temperature, specific gravity and other battery data, can provide the best basis for evaluating the overall health of batteries from terminal plate to terminal plate and to a lesser extent, the charger (from ripple current and its harmonic content.) Megger recommends that the BITE3 be made part of a comprehensive battery maintenance program with readings taken and recorded semi-annually for flooded, lead-acid cells and quarterly for VRLA.

The BITE3 is quick, reliable and easy to use. With a rapid test time, one person can easily, quickly and precisely measure cell and string parameters without taking the system off line.

 

Standard accessories

BITE3, 110/230 V ac, 50/60 Hz, CE-marked BITE3

Included Accessories

  • PowerDB software 1001-381
  • Canvas carrying case 35788
  • RS-232 null modem cable 33533-1
  • Line charger 6280-333
  • Battery 6121-492
  • Dual-point lead set BI-10002
  • Tip kit BI-10017
  • Operating manual AVTMBITE3
 

Recommended options

Optional Accessories

  • Lead set, 6 ft (1.8 m) probe to probe 36616
  • Printer, battery-operated, 110 V ac 35755-3
  • Printer, battery-operated, 220 V ac 35755-4
  • Printer paper, 1 roll 26999
  • AMP/Burndy lead set BI-10004
  • Kelvin clip lead set BI-10005
  • Quick Disconnect lead set BI-10006
  • Cigarette lighter charger 6280-332
  • Current transformer kit 35873
  • USB-serial adapter 35871
  • Probe extensions, lighted 35865
  • Hard-sided carrying case 35890
  • Standard transit case 35915
  • Field test shunt, 0.01 O, current rating 10 A 249003
  • Field test shunt, 0.001 O, current rating 100 A 249004
  • Field test shunt, 0.0001 O, current rating 500 A 249005
 

More products MEGGER

AUTOMATIC OIL CIRCUIT RECLOSER TESTER MEGGER OCR8015/9150

• Preprogrammed test sequences for reclosers and sectionalizers
• High-capacity outputs to test virtually all reclosers
• Accurate duplication of high-voltage test results
• Simple operation and precise test results
• Simplified adjustment of test current

 

MEGGER BGFT 246100B BATTERY GROUND FAULT TRACER

• Ground faults in ungrounded dc battery systems easily located
• Operates in high electrical noise environment
• Simplifies fault tracing by identifying fault characteristic (resistive and capacitive) magnitudes

 

SMART PRIMARY INJECTION TEST SYSTEM MEGGER SPI225

• Up to 2000A output
• Smallest primary injection test system in its class
• First unit on the market to eliminate variac control
• Output current regulation
• Designed for switchgear commissioning, circuit breaker, CT commissioning, ground grid and relay testing
• Software includes thousands of circuit breaker TCC curves

 

MEGGER MTK310 MTK320 MTK330 ELECTRICAL INSTALLATION TEST KITS

• Three kit options available: Insulation, continuity, earth loop, RCD testing
• MTK310: Standard electrical test kit
• MTK320: Advanced electrical test kit
• MTK330: Result storage and downloading test kit
• Rubber armoured instruments
• Weatherproof IP54
• Test leads included
• Calibration certificates included
• 3 year warranty

 

MEGGER TDR900 TIME DOMAIN REFLECTOMETER & CABLE LENGTH METER

• Full autoranging for measuring the length of power, telephony, CATV and LAN cables, provides distance to an open or short.
• Extra large, high resolution backlit LCD.
• Automatic output impedance control of 25, 50, 75, 100, 125 or 150 ohms.
• User-friendly menu on screen operation.
• Cable length calibration function.
• Internal library of 39 standard cable types.

 

MEGGER GOOSER IEC 61850 RELAY TESTER

• Reliable testing of IEC61850 relays using a conventional relay test set
• Separate Ethernet ports for the substation LAN and the controlling PC forming a Safe Substation Bus Access Point
• Seamless interaction between SCL GOOSE and GOOSE "sniffing"
• GOOSE merge - SCL GOOSE vs captured GOOSE for network troubleshooting and SCD file validation at FAT
• Stand alone functionality - Download a configuration and run

 

MEGGER MOM3 300A PORTABLE MICROOHMMETER

• Capable of generating up to 300A, ideal for measuring low resistance in electrical contacts and materials.
• Battery Supplied
• Lightweight Design
• Auto Range
• Wi-Fi Communication

 

MEGGER VLOC3-PRO CABLE UTILITY TRACE LOCATOR

• Color-coded EM distortion warnings
• Offset locate modes - Vector and Plan View
• Cloud-based data warehousing
• Internal data logging
• Optional Bluetooth connectivity

 

COMBINED LOOP AND RCD TESTERS MEGGER - LRCD210 AND LRCD220

• Non-trip loop tester
• RCD testing from 10 mA to 1000 mA
• Extremely easy and safe to use
• Built-in protective front cover

 

SINGLE PHASE HAND CRANKED TRANSFORMER TURNS RATIO TESTER MEGGER - TTR550005B

• Used for testing single phase power and distribution transformers
• Design based on precision bridge measuring technique
• Unmatched accuracy (½0.1%) in a portable design