The two-channel Model 2182A Nanovoltmeter is optimized for making stable, low noise voltage measurements and for characterizing low resistance materials and devices reliably and repeatably. It provides higher measurement speed and significantly better noise performance than alternative low voltage measurement solutions. It offers a simplified delta mode for making resistance measurements in combination with a reversing current source, such as the Model 6220 or 6221.

Features

Benefits

1nV sensitivityProvides accurate, ultra-low voltage measurements.

Typically just 15nVp-p noise at 1s response time, 40–50nV p-p noise at 60msEnsures low noise levels over a wide range of useful response times.

Dual channels Supports measuring voltage, temperature, or the ratio of an unknown resistance to a reference resistor.

Measurement cycle is synchronized to the power line AC cycle Minimizes variations due to readings that begin at different phases of the line cycle. The result is exceptionally high immunity to line interference with little or no shielding and filtering required.

Built-in thermocouple linearization and cold junction compensationSimplifies making accurate temperature measurements.

Internal polarity reversal measurement techniqueEliminates thermal error sources.

Optimized for use with Model 6220/6221 current sourcesAllows both instruments to be operated like a single instrument when making differential conductance, pulsed, and resistance measurements.

Delta mode current reversal measurement technique when combined with the 6220 or 6221 Enables resistance measurements down to 10nΩ.

2182A/6221 combination synchronizes signal pulses and measurementsMinimizes the amount of power dissipated into a temperature-sensitive DUT.

2182A1nV - 100V-200°C - 1820°C10nΩ to 200MΩ (requires 6220 or 6221)21,024rdgs7.460,00 €

More products KEITHLEY

DIGITAL PRECISION MULTIMETER 6.5 DIGIT KEITHLEY DMM 2100

• 6.5 digit
• 38 ppm accuracy
• 11 measurement functions cover most commonly measured parameters

2-SLOT SYSTEM DMM, DATA ACQUISITION, SWITCH, DATALOGGER KEITHLEY 2700

• Combines functions of DMM, switch system, and datalogger
• True 6½-digit (22-bit) resolution
• Choice of 12 switch/control plug-in modules
• Up to 200 differential input channels

PCI BOARD DIGITAL I/O 96-CHANNELS KEITHLEY KPCI-3160

• 96 or 24 TTL-level compatible digital I/O lines
• Bi-directional I/O
• High-current driver capability, 15mA (source) and 64mA (sink)

PICOAMMETER AND VOLTAGE SOURCE 5.5 DIGIT KEITHLEY 6487

• 10fA resolution
• 5-1/2 digit resolution
• <200µV burden voltage
• measure currents from 20fA to 20mA
• source voltage from 200µV to 505V

KEITHLEY 2182A NANOVOLTMETER

• The two-channel Model 2182A Nanovoltmeter is optimized for making stable, low noise voltage measurements and for characterizing low resistance materials and devices reliably and repeatably

USB MODULAR DATA ACQUISITION UNIT USB 16-CHANNELS 100KSA/S KEITLHEY KUSB-3102

• USB 2.0 and USB 1.1, true plug-and-play compatibility
• 16 SE/pseudo-DI/ 8 DI analog input channels
• 12-bit resolution
• High and low programmable gains
• Input/output speeds up to 100kS/s
• Up to 17 digital I/O lines

KEITHLEY 6514 6517B 6430 ELECTROMETER LOW CURRENT HIGH RESISTANCE

• Choose from three sensitive electrometers for precision high resistance and low current measurements.

LOW VOLTAGE NANOVOLTMETER KEITHLEY 2182A

• Make low noise measurements at high speeds
• typically just 15 nV p-p noise at 1s response time
• 40..50 nV p-p noise at 60ms

ELECTROMETER HIGH RESISTANCE METER KEITHLEY 6517B

• Measures resistances up to 10000TO
• 1fA - 20mA current measurement range
• <20 µV burden voltage on lowest current ranges
• 200 TO input impedance

DATA ACQUISITION CARD PCI 16-CHANNELS 400KSA/S KEITLHEY KPCI-3104

• 12-bit resolution
• Throughput of up to 400kS/s
• Digital I/O scanning speeds of up to 3MHz
• 16 single-ended or 8 differential analog inputs
• 23 digital I/O lines
• 2 analog outputs