KANE AUTO4-1 Class 1 OIML Automotive Exhaust Gas Analyzer car tuning diagnostic
ROM
ENGGas Analyzers > KANE (15) > KANE AUTO4-1 Class 1 OIML Automotive Exhaust Gas Analyzer
- Oscilloscopes
- Multimeters
- Signal Generators
- Spectrum Analyzers
- Universal Frequency Counters
- Power Supplies
- Electronic Loads
- Logic Analyzers
- Data Acquisition Modules
- LCR Analysis & Power Analyzers
- Power Quality Analyzers
- Electrical Installations Testers
- Earth Resistance Ground Testers
- Current Clamp Meters
- Microhmmeters
- Transformers Test
- Hipot High Voltage Testers
- Cable Fault Locators
- Circuit Breaker Analyzers
- Protection Relay Test Systems
- Battery Testers
- Solar Photovoltaic Analyzers
- Cable Network Test
- OTDR & Optical Fiber Test
- Optical Fiber Fusion Splicers
- Wireless Network Analyzers
- RF Powermeters
- TV & Satellite Analyzers
- Video Generators
- Broadcast & TV Distribution
- Antennas
- Signal Amplifiers
- Electromagnetic Field Testers
- Electrostatic Discharge Testers
- EMC & EMI Test
- Anechoic Chambers
- Multifunction Calibrators
- Temperature Calibrators
- Pressure Calibrators
- Electrical Energy Calibration
- LCR Calibration
- Infrared Thermal Cameras
- Environment Testers
- Sound & Vibration Testers
- Gas Analyzers
- Water Leak detectors
- Soldering Rework Stations Tools
- Precision Balances
- Topographic Measurements
- Biomedical Equipments
- Microscopes
- Spectrometers
- Video Inspection Borescopes
- Ultrasound Inspection Systems
- Technical Training Systems
|
|
Recommended products
KANE AUTO4-1 Class 1 OIML Automotive Exhaust Gas Analyzer
Code: KANE AUTO4-1
Product Datasheet (*.PDF - 1.65 Mb)|
Catalog KANE International (*.PDF - 7.44 Mb)
|
|
KANE Gas Analyzers TABEL COMPARATIV (*.PDF - 0.39 Mb)
|
AUTO4-1
Hand Held 4 Gas Analyser OIML Class 1
The Kane Auto 4-1 & 5-1 Series Exhaust Gas Analysers are truly portable and set new standards of convenience and ease of use.
Measures CO, HC, O2, CO2, and Lambda (or AFR)
Weighing just 1kg, the handset fits comfortably in the hand and can run for up to 4 hours on its internal re-chargeable battery.
Ideal for emission diagnostics, tuning and regulated testing, where OIML Class 1 is specified.
Features
- Easy to use hand held 4 gas analyser.
- Declaration of conformity to OIML R99 Class 1.
- Certificate of calibration supplied.
- Ideal for emissions diagnostics, tuning and regulated testing. Measures CO, HC, O2, CO2, and Lambda (or AFR).
- Easily upgradeable to NOx or can be ordered as 5 gas analyser AUTO5-1.
- Fast warm up time and fast response time with higher output pump.
- 5 language options built in
- Store up to 250 Tests
- RPM and oil temperature measurements plus accessories.
- Prints via optional Infra-red printer.
- PC compatible via RS232 for uploading stored data to PC for spreadsheet or graphical analysis and printing.
Box Contents
- Anlayser with protective rubber sleeve
- Water trap and filter
- 12v adapter cable
- AC power supply/battery charger
- Spare filters
- Exhaust probe
- Carry case
- Manual
Specification
|
Parameter |
Resolution |
Accuracy |
Range |
|
Carbon Monoxide |
0.01% |
±5% of reading*1 |
0-10% |
|
Oxygen 02 (Fuel Cell) |
0.01% |
±5% of reading *1 |
0-25% |
|
Hydrocarbon (HC-hexane) (NDIR) |
1ppm |
±5% of reading*1 |
0-3000ppm |
|
Carbon Dioxide (Infrared) |
1ppm |
±5% of reading*1 |
0-16% |
|
Nitric Oxide*2 (fuel cell) |
1ppm |
0-4000ppm ±4% or 25ppm; |
0-5000ppm |
|
Oil Temperature |
0.1°C/F |
±2.0°C±0.3% of reading |
0-150°C |
|
RMP |
1 rpm |
50 rpm |
200-6,000 rpm. |
|
Carbon Monoxide Corrected CO |
0.01% |
Calculated |
0-15% |
|
Lambda |
0.001 |
0.8 - 1.2 |
*1 Using dry gases at STP
*2 Standard on models Auto 5-2 and 5-1 only
To obtain the quoted specificaton an instrument should be calibrated with clean ambient air (normally outside the workshop) at standard temperature and pressure (STP).
**Note:** The analyser is not for use with a Dynometer, unless the high temperature probe is fitted.
|
Sensor response T95 |
15 seconds for Auto 4-1, 5-1 |
|
Warm Up |
Less than 3 minutes |
|
Pre-programmed Fuels |
Petrol, LPG and CNG |
|
Data-Logging |
255 Snap Shots |
|
Dimensions |
|
|
Ambient Operating Range |
+5°C to +40°C/10% to 90% RH non condensing |
|
Storage temperature |
Minimum: 0°C |
|
Battery Charger |
Input: 110Vac/230 Vac nominal |
|
Analyser battery run time |
>4hours from full charge with the pump running |
Box Contents
- Anlayser with protective rubber sleeve
- Water trap and filter
- 12v adapter cable
- AC power supply/battery charger
- Spare filters
- Exhaust probe
- Carry case
- Manual
KMIRP Infrared Printer with thermal printer and AA batteries
KANE IMPRINT
Infrared Printer with standard paper roll and ink ribbon, supplied with rechargeable batteries, battery charger and 2 paper rolls
NOX4-1 NOx upgrade for Auto 4-1
NOX4-2 NOx upgrade for Auto 4-2
AUTOSWKIT Auto software kit with CL3 lead for PC interface
14102/2 Laptop style carry case
17590 Metal Carry Case
EPAUTO3 High temp. EPAUTO2 probe with 17702 inline filter
EPAUTO5 High temp. probe with black hose
EPAUTO6 Motorbike Probe with emission temperature measurement
Copyright © 2010 - 2024 / Distek