4.5 digit large ¼ VGA display with white backlight
50,000 count
0.025% basic accuracy
Logging function with TrendCapture
Low input impedance function (LoZ)
Motor winding and low ohm measurement range
Low pass filter
Log multiple sessions or log data continuously for over 200 hours
i-info button on board help screens for measurement functions
Saved measurements allow you to name and recall measurements made in the field
Multiple sets of measurement information can simultaneously displayed at the same time.
Real Time Clock - for automatic time stamping of saved readings
Field upgradeable and expandable meter lets you stsay current as new capabilities are added
Multi-lingual interface
Min/Max/Average with Time Stamp to record signal fluctuations
Soft keys, scroll buttons and easy navigation control access to secondary functions.
100 kHz ac bandwidth
True-rms ac voltage and current for accurate measurements on complex signals or non-linear loads
Measure up to 10A (20 A for 30 seconds; 10A continuous)
100 mF capacitance range
Temperature function
Relative mode to remove test lead resistance from low ohms or capacitance measurements
Peak capture to record transients as fast as 250 µs
Premium test leads and alligator clips included
Optical USB PC communication interface
Limited lifetime warranty
CAT III 1000 V / CAT IV 600 V safety rated

�

Standard accessories

Manual
6 AA Batteries, installed
TL71 Silicone Test Leads
Probe Holder
Two AC72 Alligator Clips
Registration Card
Cal Practices Document
CD-ROM Users' Manual (16 languages)
Getting Started Manual
Statement of Calibration Practices Document

More products FLUKE

FLUKE 1750 THREE PHASE POWER LOGGER

• Power quality that meets the standard: comply with IEC61000-4-30 standards for voltage, current, power, harmonics, flicker etc.
• 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events
• 5 MHz Transient Voltage
• Captures everything
• Plug and play
• Wireless connection

VOLTAGE CONTINUITY TESTER FLUKE T50

• Voltage test
• Optical and acoustical continuity test
• Display: 10 LED's

HANDHELD LOOP CALIBRATOR FLUKE 705

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.02%

FLUKE 700HTP-2 HYDRAULIC TEST PUMP FOR PRESSURE CALIBRATION

• hand operated hydraulic pressure pump
• designed to generate calibration pressures up to 10,000 psi/690 bar
• Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
• Integral pressure adjustment vernier knob for fine pressure adjustment
• Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
• Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
• Improved priming
• Improved stroke limiting mechanism

TRUE-RMS CURRENT CLAMP METER 400 A FLUKE 325

• 400 A ac and dc current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection
• Temperature and capacitance measurement
• Frequency measurement

VIBRATION METER FLUKE 805

• measures overall vibration as well as specific variables like bearing condition and temperature
• calculate bearing condition and overall vibration
• Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz)
• Exportable data via USB
• Crest Factor+

TRUE-RMS CURRENT CLAMP METER 400 A FLUKE 323

• 400 A ac current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection

FLUKE 1623-2 GEO EARTH GROUND RESISTANCE TESTER

• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• Rugged carrying case
• USB data storage and transfer

INTRINSICALLY SAFE PRESSURE CALIBRATOR FLUKE 718

• ATEX II 1G Ex ia IIC T4 Compliant
• Built-in pressure / vacuum hand pump
• Pressure measurement to 0.05%
• Pressure measurement to 200

INFRARED DIGITAL THERMOMETER FLUKE 62

• High-resolution optics
• High accuracy: 1 % and repeatability: 0.5 %
• MAX temperature display
• Laser targeting
• Backlit display
• Expanded measurement range up to 535 °C (999 °F)