ATEX II 1G Ex ia IIC T4 Compliant
Built-in pressure / vacuum hand pump, with fine adjust vernier and bleed valve
30, 100, and 300 psi ranges (2, 7, and 20 bar)
Pressure measurement to 0.05% of full span, using an internal pressure sensor
Pressure measurement to 200 bar using any of eight intrinsically safe Fluke 700PEx Pressure Modules
Wide range of selectable measurement units for pressure
Current measurement with 0.02% accuracy and 0.001 mA resolution
Pressure switch test function
Min-Max Hold functions
Compact size and weight
Simple, push-button user interface
Rugged and reliable, ideal for field use

Standard accessories

Protective Red Holster
TL75 Test Leads
AC72 Test Clips
CD Users Manuals
Fluke 718Ex CCD content control drawing
NIST- traceable calibration report and data

Recommended options

Fluke 718EX 30	Pressure Calibrator 30 PSI, EX - I.S.
Fluke 718EX 100G	Pressure Calibrator 100 PSI, EX - I.S
Fluke 718EX 300G	Pressure Calibrator 300 PSI, EX - I.S

More products FLUKE

FLUKE 438 II MOTOR AND ENERGY QUALITY ANALYZER

• Measure key parameters on direct-on-line motors including torque, RPM, mechanical power and motor efficiency
• Perform dynamic motor analysis by plotting of motor derating factor against load according to NEMA/IEC guidelines
• Calculate mechanical power and efficiency without the need of mechanical sensors, just connect to the input conductors and you're ready to go
• Measure electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency

CURRENT CLAMP METER AC/DC TRUE-RMS 2000 A FLUKE 353

• 2000 A AC + DC true-rms, 1400 A AC, and 2000 A DC
• large 58 mm (2.3 in) jaw capacity
• Accurately measure frequency up to 1 kHz

FLUKE 8846A DIGITAL BENCH MULTIMETER 6.5 DIGIT

• 6.5 digit resolution
• Basic Vdc accuracy 0.0024 %
• Dual display
• 100 µA to 10 A current range, with up to 100 pA resolution

DOCUMENTING PROCESS CALIBRATOR FLUKE 741B

• 0 to 300 V DC/AC Voltage measure
• 0 to 15 V DC Voltage source / simulate
• 0 to 110 mA DC Current measure
• 0 to 22 mA DC Current source / simulate
• 0 to 11 kO Resistance measure / source / simulate
• 1 to 50 kHz Frequency measure / source / simulate

FLUKE 700G PRECISION PRESSURE TEST GAUGE

• Precision pressure measurement from -20 mbar to 690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance

FLUKE TIS40 INFRARED CAMERA 160X120

• Fluke TiS10 80x60 pixels
• Fluke TiS20 120x90 pixels
• Fluke TiS40 160x120 pixels
• Fluke TiS45 160x120 pixels
• Fluke TiS50 220x165 pixels
• Fluke TiS55 220x165 pixels
• Fluke TiS60 260x195 pixels
• Fluke TiS65 260x195 pixels

TRUE-RMS CURRENT CLAMP METER 400 A FLUKE 324

• 400 A ac current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection
• Temperature and capacitance measurement

FLUKE 1623-2 GEO EARTH GROUND RESISTANCE TESTER

• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• Rugged carrying case
• USB data storage and transfer

FLUKE 700HTPK HYDRAULICTEST KIT FOR PRESSURE CALIBRATION

• Combine with any Fluke-700G Series Gauge, 1,000 psi range or greater, to make a complete pressure testing kit
• Generates pressure up to 10,000 psi range or greater, to make a complete pressure testing kit
• Connect the 700G Series gauge directly to the HTP-2 hand pump
• Includes 700HTH-1 hose kit and adapters for connecting to the pressure device to be tested
• Hard case protects pump and gauge and allows gauge to remain connected to the pump

FLUKE 190-202 190-202/S HANDHELD DIGITAL OSCILLOSCOPE 2X200 MHZ

• 2-channels isolated 200MHz
• CAT III 1000V / CAT IV 600V safety rated
• Dedicated 5000 Count digital multimeter in two-channel models
• Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
• IP-51 rated for dust and drip proof to withstand harsh environments
• Isolated USB ports for memory devices and PC connectivity