Detachable digital display, read measurements up to 30 feet away
iFlex fexible current probe included, 18-inch circumference
2500 A AC current measurement with iFlex
1000 A AC current measurement with fxed jaw
1000 V AC and DC voltage measurement
True-rms AC voltage and current
Frequency measurement to 500 Hz
60-k O resistance measurement
Min/Max/Avg and inrush recording
500 mV DC measurement range
1000 µF capacitance measurement
CAT IV 600 V, CAT III 1000 V safety rating
Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
The removable magnetic display can be conveniently mounted where it is easily seen
Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Three-year warranty
Soft carrying case

Standard accessories

18-inch iFlex™ flexible current probe
Coated instruction card
Safety information sheet
Soft carrying case
TL75 test leads
Five AA Alkaline batteries

Recommended options

i2500-18 iFlex™ Flexible Current Probes 2500 A
i2500-10 iFlex™ Flexible Current Probes 2500 A
TL223 SureGrip™ Electrical Test Lead Kit
TL71 Test Lead Set
TL224 SureGrip™ Silicone Test Lead Set
AC72 Alligator Clip Set
AC285 SureGrip™ Alligator Clip Set
AC220 SureGrip™ Alligator Clip Set
AC87 Heavy Duty Bus Bar Clips
AC89 Heavy Duty Insulation Piercing Test Clip
TL75 Hard Point Test Lead Set
TP1 Slim Reach Test Probe (flat blade)
Fluke MeterCleaner Wipes
H3 Holster (330 Series)
C33 Soft Carrying Case
C1600 Gear Box for Meter and Accessories
C550 Tool Bag
LVD2 Volt Light
L206 Deluxe LED Hat Light
LVD1 Volt Light

More products FLUKE

INDUSTRIAL VOLTAGE AND CURRENT MEASUREMENT SYSTEM FLUKE CNX 3000 IND

• True-RMS AC and DC voltage measurements to 1000V
• True-RMS AC and DC current with 0.01 mA resolution
• True-RMS AC current measurements to 2500 A
• True-RMS AC voltage measurements to 1000V
• CAT III 1000 V, CAT IV 600 V, CAT III 1000 V; IP42

FLUKE 1621 EARTH GROUND TESTER

• 3-pole Fall-of-Potential earth testing for basic measurements
• 2-pole resistance measurements for added versatility
• 600 V Cat II

MULTIFUNCTION PROCESS CALIBRATOR FLUKE 725

• 0 to 100 mV, 0 to 30 V DC Voltage measure
• 0 to 100mV, 0 to 10 V DC Voltage source / simulate
• 0 to 24 mA Current measure / source / simulate
• 0 to 3200 O Resistance measure / source / simulate
• 1 to 10 kHz Frequency measure / source / simulate
• RTDs, thermocouples measure / source / simulate
• pressure measure

VOLTAGE CONTINUITY TESTER FLUKE T120

• LED Bargraph
• Display: Fluke T120: 3½ digit LCD
• Voltage test
• Optical and acoustical continuity test

FLUKE 83V HANDHELD DIGITAL MULTIMETER 3.75 DIGIT

• 3.75 digit
• 6000 count resolution
• 0.1% basic accuracy

FLUKE NORMA 5000 PRECISION POWER ANALYZER

• 3, 4 or 6 power phases
• Bandwidth from dc to 3 MHz / 10 MHz
• FFT analysis, vector diagram, and Digital Oscilloscope
• Voltage, current and power harmonics measured up to the 40th harmonic

FLUKE 2042 CABLE TRACE LOCATOR FOR

• for tracing cables in walls and underground
• locating fuses/breakers on final circuits
• locating interruptions and short-circuits in cables and electrical floor heating systems
• for tracing metallic water and heating pipes

FLUKE 700PTP-1 PNEUMATIC TEST PUMP FOR PRESSURE CALIBRATION

• Ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to 600 PSI/40 bar
• Pump can be easily cleaned without disassembly
• The vernier can be used as a stand-alone low pressure calibration source
• Two pressure ports allowing simultaneous connection:
• ¼ -NPT female fitting for the reference gauge or pressure module
• ¼" NPT female fitting for the unit under test
• Adjustable stroke length can be set to limit the pressure per stroke

DIGITAL PYROMETER FLUKE 63

• Single point offset laser sighting
• Best accuracy in its class: + 1% of reading
• Holds temperature readings for 7 seconds
• Dual displays shows current and MAX measurements simultaneously
• Backlit display for poorly lit areas
• Wide temperature range from -30� to 500�C (-20� to 932�F)

FLUKE 714B THERMOCOUPLE CALIBRATOR

• measure and simulate (17) different thermocouple types and millivolts
• Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal
• Configurable 0 % and 100 % source settings for quick 25 % linearity checks
• Linear ramp and 25 % step auto ramp based on 0 % and 100 % settings
• Dual inputs and backlit display for easy interpretation of measurements
• Power down settings remembered at power up for easy restart of tests
• 1-year and 2-year specifications and traceable certification of calibration