4.5 digit
20,000 count resolution for precise measurements
0.05% basic accuracy
New - IP 67 waterproof & dustproof protection, completely sealed for use in
harsh environments
Measure up to 1000 V ac and dc
Measure up to 10 A (20 A for 30 seconds)
10,000 µF capacitance range
Frequency to 200 kHz
Extended ac voltage bandwidth-40 Hz to 30 kHz
Resistance, continuity and diode test
Min/Max and average recording to capture variations automatically
Designed to withstand 3 meter drop (with holster)
Average responding voltage and current for measurements
New - Backlit keypad buttons allow for easy visibility in low-lit areas
Large display digits and 2 level bright white backlight for increased visibility
Reversible holster for added protection when not in use
Withstands hazardous 8,000 volt spikes caused by load switching and
faults on industrial circuits and complies with second edition IEC and ANSI
electrical safety standards
Long battery life (800 hours)
Relative mode to remove test lead resistance from low ohms measurements
Auto and manual ranging for maximum flexibility
Optional magnetic hanger for easy setup and viewing while freeing your
hands for other tasks
MSHA approval (pending)

Standard accessories

More products FLUKE

INFRARED NON-CONTACT THERMOMETER FLUKE 572

• Backlit display for poorly lit areas
• Last ten temperature readings displayed on bar graph for easy reference
• Enhanced optics (distance to spot ratio up to 60:1) allow measurements of smaller objects from farther away
• Coaxial three-dot laser sighting system highlights the true diameter of measurement spots at all distances (90% energy)
• MIN/MAX measurements calculations instantly computed
• Audible and visible HI temperature alarm for instant recognition

FLUKE 8808A DIGITAL BENCH MULTIMETER 5.5 DIGIT

• 5.5 digit resolution
• Basic V dc accuracy of 0.015 %
• Dual display

FLUKE 233 HANDHELD DIGITAL MULTIMETER 3.5 DIGIT

• 3.5 digit
• 6000 count
• 0.25% accuracy
• Remote Display
• Measure up to 1000 V ac and dc
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 µF capacitance range
• Frequency to 50 kHz
• True-rms ac voltage and current for accurate measurements on non-linear signals

FLUKE 6303A LCR METER 1 KHZ

• 1 kHz test frequency
• 0.25% accuracy
• test signal level: 2V via 400O source

FLUKE 6304/ 6304C AUTOMATIC RCL METER 50 HZ..100 KHZ

• 50, 60, 100, 120 Hz, 200 Hz to 20 kHz (100 Hz steps), 100 kHz test frequencies
• 0.1 % basic accuracy (0.05 % for PM 6304C)
• Easy to use, at-a-glance display

INTERNAL BATTERY RESISTANCE ANALYZER FLUKE BT520

• Key measurements: Battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and battery temperature.
• Enhanced data analysis: Quickly compare trends, analyze results and create reports with included battery management software.
• Easy reporting: Generate PDF report on the PC software with analysis graphics and data table or quick email format report with csv file on the mobile app.
• Wireless communication
• USB Port

FLUKE 77IV HANDHELD DIGITAL MULTIMETER 3.5 DIGIT

• 3.5 digit
• 6000 count resolution
• 0.3% basic accuracy
• Large display
• Backlight for work in dim areas

FLUKE 700G PRECISION PRESSURE TEST GAUGE

• Precision pressure measurement from -20 mbar to 690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance

POWER QUALITY CLAMP METER FLUKE 345

• 2000A AC/DC current
• 600 V CAT IV power analyzer
• Data logging
• Troubleshoot harmonics
• Inrush current

FLUKE 700HTPK HYDRAULICTEST KIT FOR PRESSURE CALIBRATION

• Combine with any Fluke-700G Series Gauge, 1,000 psi range or greater, to make a complete pressure testing kit
• Generates pressure up to 10,000 psi range or greater, to make a complete pressure testing kit
• Connect the 700G Series gauge directly to the HTP-2 hand pump
• Includes 700HTH-1 hose kit and adapters for connecting to the pressure device to be tested
• Hard case protects pump and gauge and allows gauge to remain connected to the pump