The MO280 provides Non-invasive moisture measurements in wood and other building materials with virtually no surface damage. Meter uses electro-magnetic technology to quickly indicate the moisture content of wood and building materials. Select from 10 wood types and measurement ranges. The LCD displays % moisture of wood or material being tested. It has a measurement depth to 0.75 in. (22mm) below the surface. The meter also features an automatic internal test and calibration and low battery indication. Complete with 9V battery and pouch case.

Features:

Non-invasive measurement to monitor moisture in wood and other building materials
Select from 10 wood types and measurement ranges
Measurement depth to 0.75" (20mm) below the surface
LCD displays % moisture of wood or material being tested

Recommended options

iar nu ergerge yt

More products EXTECH

EXTECH 407736: DUAL RANGE SOUND LEVEL METER

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

EXTECH 407732: LOW/HIGH RANGE SOUND LEVEL METER

• High accuracy meets ANSI and IEC 651 Type 2 standards
• High and Low measuring ranges: 35 to 100dB (low) and 65 to 130dB (high)
• Data Hold and Max Hold functions
• Backlit LCD display to view in dimly lit area

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH DCP60-220: 600W SWITCHING POWER SUPPLY (220V)

•

EXTECH MG320 CAT IV INSULATION TESTER/TRUE RMS MULTIMETER

• Measure Insulation Resistance to 20GO
• 5 Test Voltage ranges
• Polarization Index (PI) and Dielectric Absorption Ratio measurements (DAR)
• Low Resistance measurement with Zero function
• Programmable Timer feature sets the duration of test

EXTECH DM220 MINI POCKET MULTIMETER WITH NON-CONTACT VOLTAGE DETECTOR

• Large high contrast 4000 count LCD display
• Non-Contact Voltage detection identifies live circuits
• Built-in Flashlight
• Measures AC/DC Voltage, AC/DC Current and Resistance, Frequency and Duty Cycle
• Diode Test and Continuity Beeper

EXTECH EX350 11 FUNCTION TRUE RMS MULTIMETER + NCV

• True RMS for accurate AC measurements
• 4000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals

EXTECH EX503 10 FUNCTION HEAVY DUTY INDUSTRIAL MULTIMETER

• Averaging DMM with 10 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current

EXTECH LCR200: PASSIVE COMPONENT LCR METER

• Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
• Auto Select measurement function with 1kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits

EXTECH 382280: PRECISION WITH PROGRAMMABLE 200 WATT OUTPUT DC POWER SUPPLY

• High resolution (1mV and 1mA) user programmable output
• Selectable constant Voltage or Current modes
• 0 to 60 second programmable overload delay timer
• Storage/Recall memory