Extech DC400 400A DC Mini Clamp Meter

• Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Built-in sensor with protective cover
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with 2 AAA batteries, and pouch

 

• True RMS for better accuracy when measuring distorted waveforms
• 2000 count large backlit dual LCD with easy-to read digits
• Low current capability with resolution to 0.1µA
• Input fuse protection
• Max Hold, Data Hold and Auto power off
• Complete with test leads and 9V battery

 

• Measures from 2" to 115' (0.05 to 35m)
• Laser measurement accurate to 0.08 inches at 32 feet
• Historical Storage recalls the previous 10 records (measurements or calculated results)
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean theorem

 

• Test the output voltage, current, capacity and stability to prolong the charging equipment’s life cycle
• Test the quality of charging cable
• 10 storage bank locations
• Lightweight, ergonomic design with USB-A connector
• Complete with internal battery and USB plug cover for storage

 

• Displays moisture in wood and other building materials plus Air Temperature and Relative Humidity
• Digital LCD readout with analog bargraph and numerical displays
• Simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication
• Use on wood, paper, wall board, sheet rock, cardboard, plaster, concrete, and mortar

 

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

 

• Portable tester for measuring of both Free and Total Chlorine up to 3.50ppm
• 
• The CL500 is a free and total Chlorine meter. This chlorine tester measures up to 3.50ppm with 0.01ppm resolution on its large LCD screen. Complete with Free, Total and Zero Chlorine standard solutions, test bottles with covers, Free and Total Chlorine DPD powder (10pcs), cleaning cloth, 6 AAA batteries, and hard carrying case.

 

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free NDIR (non-dispersive infrared) CO2 sensor
• Indoor Air Quality displayed in ppm with Good (0 to 800ppm), Normal (800 to 1200ppm), Poor (>1200ppm) indication
• User programmable Visible and Audible CO2 warning alarm

 

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

 

• Smart Auto Sensing technology enables the meter to recognize the input and automatically switch to the correct mode of operation
• For AC Voltage, Auto Sense feature evaluates input signal and adjusts Input Impedance to eliminate effects of ghost voltages
• 0.6" (16mm) open jaw size
• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Built-in non-contact voltage detector with LED indicator
• 10,000 count backlit LCD display