Extech EA30 EasyView™ Wide Range Light Meter

• Large LCD display with advanced illuminance functions and features
• Wide measurement range to 99,990Fc (999,900 Lux) with resolution of 0.001Fc and 0.01Lux
• Luminous intensity (candela) calculations
• Store and recall up to 50 measurements, includes relative or real time clock stamp
• Ripple function excludes the effect of stray light from the primary light source measurement
• Timed-Hold, Relative in absolute value or % deviation, and Comparator function with high low alarms

 

• High resolution (1mV and 1mA) user programmable output
• Selectable constant Voltage or Current modes
• 0 to 60 second programmable overload delay timer
• Storage/Recall memory

 

• Monitor moisture in wood and other building materials
• Measure directly with the built-in moisture pins or use remote hand-press probe on hard surfaces
• Memory contains 8 wood groups with calibrations for approximately 170 species of wood
• Designed in a rugged double molded housing construction and is pocket sized for one-handed operation

 

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Pinless moisture measurement depth to <1" (25mm)
• Audible Alert - Tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

 

• Displays Barometric Pressure in 3 units of measure: hPa, mmHg, and inHg
• Triple LCD simultaneously displays Barometric Pressure, Temperature, and Relative Humidity
• Datalogger date/time stamps and stores readings on an SD card in Excel® format for easy transfer to a PC
• Selectable data sampling rate: 5, 10, 30, 60, 120, 300, 600 seconds
• Complete with (6) AAA batteries, SD memory card, Universal AC adaptor, and mounting bracket

 

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

 

• Large 2000 count LCD display
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Relative zero, Data Hold, Range Hold and Auto power off
• 10A fuse protection
• Overload protection and indication
• Includes protective holster with stand, general purpose Type K bead wire temperature probe, 2 AAA batteries and test leads

 

• Designed for professionals who routinely audit existing and replacement lighting systems for energy efficiency and lighting performance
• Kit includes:
• LT300 - Light meter with digital and analog display of light in Foot-candles or Lux
• DT200 - Compact laser distance meter with area/volume calculation functions
• 380940 - 400A True RMS AC/DC power clamp meter
• Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed

 

• True RMS for accurate AC measurements
• 1.18" (30mm) jaw size accomodates conductors up to 350MCM
• 6000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Built-in non-contact voltage detector (NCV) with LED indicator
• Built-in LED flashlight for working in dimly-lit areas

 

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off, Auto-rotating display depending on function
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery