Extech 380580 Battery Powered Milliohm Meter

Code: Extech 380580


 

Datasheet PDF, 0.25 Mb

Description

High accuracy, high resolution portable Milliohm Meter for field use

The 380580 is a Battery Powered Milliohm Meter. This milliohm meter features a high accuracy, a high resolution, portable milliohm meter battery operated for field use, four terminal Kelvin measurements, and Over-temperature and over-voltage protection. CE certified. Complete with 8AA batteries, and 2 sets of test leads (4 wire with 4 alligator clips and 4 wire with 2 Kelvin alligator clips).

 

Features:

  • Four terminal Kelvin measurements
  • Over-temperature and over-voltage protection
  • 5 ranges with 100µOhm max resolution
  • Invalid test indicators prevent inaccurate measurements
  • Built-in water resistant case with shoulder strap
 

More products EXTECH

EXTECH ET10: GFCI RECEPTACLE TESTER

• Works with GFCI circuits
• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

 

EXTECH HD700 DIFFERENTIAL PRESSURE MANOMETER (2PSI)

• ±2psi range, 11 Selectable units of measure
• Max/Min/Avg recording and Relative time stamp
• Data Hold, Auto power off and Zero function
• Large LCD display with backlighting

 

EXTECH HW30 HEATWATCH™ HUMIDITY/TEMPERATURE STOPWATCH

• User adjustable Heat Index alarm
• Stopwatch/chronograph mode with 1/100 second resolution
• Fastest/Slowest/Average Lap recall
• 99 lap counter with 30 lap/split memory
• 10 hour countdown timer with audible beeper warning for the last 5 seconds
• Programmable alarm
• Calendar mode displays day, month, and date

 

EXTECH 96VFL11: 1/4 DIN TEMPERATURE PID CONTROLLER WITH TWO RELAY OUTPUTS

• Two relay outputs
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control

 

EXTECH TG20 WIRE TRACER KIT

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines

 

EXTECH EX530 11 FUNCTION HEAVY DUTY TRUE RMS INDUSTRIAL MULTIMETER

• True RMS DMM with 11 functions and 0.06% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current

 

EXTECH MA130 MINI 200A AC CLAMP METER

• Mini pocket-sized design
• Backlit LCD display
• 0.6" (16mm) jaw size fits conductors up to 300MCM
• Data Hold freezes reading on display
• Max Hold displays maximum reading
• Large LCD with backlit feature for viewing in dimly lit area

 

EXTECH SDL500 HYGRO-THERMOMETER/DATALOGGER

• Relative Humidity, Temperature, Dew Point, and Wet Bulb measurement
• Adjustable data sampling rate
• Stores 99 readings manually and 20M readings via 2G SD card
• Type K/J Thermocouple input for high temperature measurements
• Large backlit dual LCD display

 

EXTECH LT300 LIGHT METER

• Wide range to 40,000Fc or 400,000 Lux with max resolution to 0.01 Fc/Lux
• Relative mode indicates change in light levels, peak mode captures highest reading
• Remote light sensor on 12" (30.5cm) coiled cable - expandable to 24" (61cm)
• Utilizes precision photo diode and color correction filter
• Large LCD display with analog bargraph
• Backlight for readings in low light levels
• Complete with 9V battery, light sensor with protective cover, protective holster, and soft case

 

EXTECH EX410A: 8 FUNCTION PROFESSIONAL MULTIMETER

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 10A max Current