The Extech EX900 ExStik® 4-In-1 Kit includes a CL200 meter, pH and ORP electrodes, reagent tablets (50 tests), four plastic cups, a weighted stand, pH buffer pouches, four CR2032 batteries, 48-inch neckstrap, carrying case, and user manual. The meter measures total chlorine, pH, ORP, and temperature with interchangeable flat surface electrodes that are included. Flat surface electrodes work in liquids, semi-solids and solids. Built-in memory can store/recall up to 15 readings and save the last calibrated value. It has a large 3-1/2 digit (2000 count) digital display with a bargraph and an automatic electronic self-calibration function for chlorine and ORP (1, 2, or 3 point buffer calibration for pH).

Features

Includes CL200 meter, pH and ORP electrodes, reagent tablets, 4 plastic cups, weighted stand, pH buffer pouches, batteries and carrying case

4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus Temperature with interchangeable flat surface electrodes (included)

Flat surface electrodes work in liquids, semi-solids and solids

Memory stores and recalls 15 readings and saves last calibrated value

Large 3-1/2 digit (2000 count) Digital display with bargraph

Automatic electronic self calibration for Chlorine and ORP; 1, 2 or 3 point buffer calibration for pH

Data Hold, Auto shut-off and low battery indication

Simultaneous display of ppm or pH and °C/°F Temperature

Automatic Temperature Compensation

More products EXTECH

EXTECH MO55 COMBINATION PIN/PINLESS MOISTURE METER

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Pinless moisture measurement depth to <1" (25mm)
• Audible Alert - Tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

EXTECH DCP42 160W SWITCHING POWER SUPPLY

• Constantly calculates and adjusts the Voltage and Current limit points according to available maximum power (160W)
• At maximum current (10A), voltage is limited to 16V
• At maximum voltage (42V), current is limited to 3.8A
• Dual action rotary encoder control with push knob for fine and coarse tuning

EXTECH EMF510 EMF/ELF METER

• Measure EMF/ELF levels in milliGauss (mG) or microTesla (µT) up to 2000mG (200µT) with two ranges to choose from
• Built-in single axis sensor provides basic accuracy reading of ±5%
• 30 to 300Hz bandwidth
• Backlit display to view in dimly lit areas
• Data Hold and Min/Max functions

EXTECH 380360 DIGITAL MEGOHMMETER

• Three test voltages of 250V, 500V and 1000V
• Insulation Resistance to 2000MOhm
• Safety Power Lock enables "hands free" operation for 3 minute test
• Automatic discharge when safety "Press to Test" button is released
• Continuity measurements to 200Ohm and Voltage to 600VAC

EXTECH DCP60-220: 600W SWITCHING POWER SUPPLY (220V)

•

EXTECH SDL470 UVA/UVC LIGHT METER/DATALOGGER

• UVA probe captures long-wave 365nm UV irradiance measurements under a UVA (black light) source
• UVC probe captures short-wave 254nm UV irradiance measurements under a UVC light source
• Cosine correction filter and metal housing
• Datalogging feature records readings with date and time stamp on an SD card (included) in Excel® format
• Offset adjustment used for zero function or to make relative measurements
• Adjustable data sampling rate from 1 to 3600 seconds

EXTECH 382202 18V/3A SINGLE OUTPUT DC POWER SUPPLY

• Constant voltage or current
• Dual backlit LCD displays for voltage and current
• Short circuit protection
• Current limiting

EXTECH 480846 8GHZ RF ELECTROMAGNETIC FIELD STRENGTH METER

• Mobile phone base station antenna radiation
• RF power measurement for transmitters
• Wireless LAN (Wi-Fi) detection/installation
• Wireless communication applications (CW TDMA GSM DECT)
• Microwave leakage

EXTECH MG310 DIGITAL INSULATION TESTER

• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)

EXTECH CT20 REMOTE & LOCAL CONTINUITY TESTER

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.