MA620 is a True RMS, autoranging AC clamp meters offer plant maintenance techs, electrical troubleshooters, and DIYers a test instrument that delivers a combination of high performance and exceptional value. In addition to a host of advanced multimeter and current measurement capabilities, it also has a built-in, non-contact (NCV) voltage detector. You can select auto- or manual-ranging modes, measurement functions cover all types of troubleshooting over and above noninvasive current probe measurements: voltage, resistance, capacitance, frequency, duty cycle, diode and continuity tests. Even measure temperature with the supplied Type K bead wire probe. Complete with test leads, general purpose Type K bead wire temperature probe, 9V battery and carrying case.

� AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity

� Integrated Non-Contact Voltage Detector with LED alert

� 1.5" (40mm) jaw size for conductors up to 500MCM

� 6000 count, backlit LCD display

� Relative Mode for Capacitance Zero and Offset Adjustment

� Data Hold, MIN/MAX, and Auto Power Off

� Complete with test leads, general purpose Type K bead wire temperature probe, 9V battery and carrying case

More products EXTECH

EXTECH ET40 HEAVY DUTY CONTINUITY TESTER

• Ideal for checking continuity of non-energized components, fuses, switches, relays, wiring and circuit boards
• 30" (76cm) test lead with alligator clip

EXTECH MA410 400A AC CLAMP METER + NCV

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• Compact size allows measurments in tight locations
• 1.2" (30mm) jaw size for conductors up to 350MCM
• Relative Mode for Capacitance Zero and Offset Adjustment

EXTECH RT30: WIRELESS AC CIRCUIT IDENTIFIER (914MHZ) WITH EXTERNAL PROBE

• Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
• Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
• Non-contact mid-run AC wiring identification without cutting into wires
• Lighting circuit identification using built-in light sensor

EXTECH 382100 1200A 3-PHASE POWER ANALYZER/DATALOGGER

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V

EXTECH SDL470 UVA/UVC LIGHT METER/DATALOGGER

• UVA probe captures long-wave 365nm UV irradiance measurements under a UVA (black light) source
• UVC probe captures short-wave 254nm UV irradiance measurements under a UVC light source
• Cosine correction filter and metal housing
• Datalogging feature records readings with date and time stamp on an SD card (included) in Excel® format
• Offset adjustment used for zero function or to make relative measurements
• Adjustable data sampling rate from 1 to 3600 seconds

EXTECH 480826 TRIPLE AXIS EMF TESTER

• Three axis (X, Y, Z direction) electromagnetic field measurement
• Ideal for EMF measurements around power lines, electrical appliances and industrial devices
• Wide measuring ranges (3 ranges of µTesla or mGauss)
• Big digit LCD display, Data hold
• Easy to use remote probe
• Complete with sensor with 3ft (930mm) cable, 9V battery, and hard carrying case

EXTECH ET10: GFCI RECEPTACLE TESTER

• Works with GFCI circuits
• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

EXTECH AN25 HEAT INDEX ANEMOMETER

• Built-in multiparameter sensors measure Air Velocity, Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Dew Point, Wet Bulb, Temperature, and Windchill
• MIn/Max/Average (5sec/10sec/13sec)
• Data Hold, Auto Power Off with disable
• Replaceable Mini impeller (vane)
• Complete with CR2032 battery

EXTECH TG20 WIRE TRACER KIT

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines

EXTECH RH520A-220 HUMIDITY+TEMPERATURE CHART RECORDER WITH DETACHABLE PROBE (220V)

• Simultaneous numerical and graphical display of Humidity and Temperature readings, plus Time and Date
• Measures Humidity (10 to 95%RH) and Temperature (-20.0°F to 140.0°F) plus calculates Dew Point
• Basic accuracy 3%RH, 1.8°F/1°C
• Large dual graphical LCD displays with adjustable vertical and horizontal TAC resolution
• Internal memory records up to 49,000 data points and can be transferred to a PC via RS-232 serial port for further data analysis
• LCD indicates percentage of memory remaining
• Comes with 220V AC power supply