Low power dissipation

Compact Rugged Construction

100dB insertion loss from 40kHz

Suitable for 400Hz supplies

Current Range 16 to 200 Amperes

APPLICATIONS

In high performance screened rooms and anechoic chambers the N500X series provides protection of both incoming and outgoing supplies in line with the shield performance.

In TEMPEST applications, the N500X filters provide an extremely high degree of protection required to obtain maximum security.

N500X filters are ideal for EMC applications such as computer suites.

N500X filters can be used for general purpose high performance filtering.

Electrical Specifications

PART #

Current Max (Amps)

Voltage Max (Volts)

Frequency (Hz)

Number of Lines

Volt Drop on Full Load in a 250V 50/60Hz System per Line (Max)

Full Load Dissipation

5000

16

250

DC/50/60/400

2

1.3

20

5001

16

440/250

DC/50/60/400

4

0.65

20

5002

32

250

DC/50/60/400

2

0.3

20

5003

32

440/250

DC/50/60/400

4

0.15

20

5004

63

250

DC/50/60/400

2

0.4

48

5005

63

440/250

DC/50/60/400

4

0.2

48

5006

100

250

DC/50/60/400

2

0.3

60

5007

100

440/250

DC/50/60/400

4

0.15

60

5008

200

250

DC/50/60/400

2

0.2

80

5009

200

440/250

DC/50/60/400

4

0.1

80

High performance screen rooms, providing attenuation of both the incoming and outgoing mains supply lines to match the shield performance
Tempest applications, where the very highest degree of protection is required to obtain maximum security
EMP protection systems

Electrical Specifications

Part #	Current Max	Frequency	Max Voltage	# of Lines	Voltage Drop On Full Load in 250V 50/50Hz System/Line	DC Resistance Per Line
N2550	6 A	50/60 Hz	250 V	2	1 V	50 O
N2551	6 A	50/60 Hz	440/250 V	4	1 V	50 O
N2552	16 A	50/60 Hz	250 V	2	1 V	12 O
N2553	16 A	50/60 Hz	440/250 V	4	1 V	12 O
N2554	32 A	50/60 Hz	250 V	2	0.6 V	24 O
N2555	32 A	50/60 Hz	440/250 V	4	0.6 V	24 O
N2556	63 A	50/60 Hz	250 V	2	1.5 V	15 O
N2557	63 A	50/60 Hz	440/250 V	4	1.5 V	15 O
N2558	100 A	50/60 Hz	250 V	2	0.9 V	5 O
N2559	100 A	50/60 Hz	440/250 V	4	0.9 V	5 O

More products ETS-LINDGREN

MAGNETIC SHIELDED COIL ANTENNA LOW FREQUENCIES 30 HZ..100 KHZ ETS-LINDGREN 7605/ 7606

• Frequency Minimum 30 Hz
• Frequency Maximum 100 kHz
• Connectors Banana Jack (2) - [7605], BNC - [7606]
• Impedance (Nominal) 50 ?
• Pattern Type omnidirectional
• Polarization linear

CONICAL LOG SPIRAL ANTENNA 1..10 GHZ ETS-LINDGREN 3102

• Frequency Minimum 1 GHz
• Frequency Maximum 10 GHz
• Connectors Type N (f)
• Impedance (Nominal) 50 Ohm
• Maximum Continuous Power 50 W
• Pattern Type directional
• Peak Power 100 W
• Polarization circular
• VSWR 1.6:1
• Extremely low VSWR

WIRELESS INTERFACE TEST SYSTEM FOR MOBILE PHONE TESTING IN CELLULAR COMMUNICATIONS ETS-LINDGREN 5211

• Works with Mobile/Cellular Radio Test Sets: HP 8924
• >80 dB Typical RF Isolation
• On-The-Air Test TX, RX Functionality Without Direct Cable connection to Cell Phone Data Port
• Flat Coupling Response over 700 MHz - 2 GHz

GTEM TEST CELL FOR EMC RADIATED EMISSIONS & IMMUNITY ETS-LINDGREN 5411

• Frequency: DC - 20 GHz (RI) 2 9 kHz - 5 GHz (RE) 1
• Post Production
• For all Phases of EMC Testing - Design Qualification - Pre-Compliance
• Full Compliance IEC 61000-4-3 ANSI C63.4

QUAD-RIDGED OPEN BOUNDARY HORN ANTENNA 400 MHZ..10 GHZ ETS-LINDGREN 3164-10

• Frequency Minimum 400 MHz
• Frequency Maximum 10 GHz
• VSWR Ratio (AVG) 5:1 maximum, 1.75:1 average
• Maximum Continuous Power 100 watts @ 400 MHz, 20 watts @ 10 GHz
• Impedance (Nominal) 50 ?

UNIVERSAL SPHERICAL DIPOLE EMI RADIATION SOURCE ETS-LINDGREN USDS

• Portable EMI Source for Quick Test Site Characterization and Site-to-Site Comparisons
• Horizontal and Vertical Polarizations
• Selectable Pulse Mode for Testing Quasi-Peak Detectors
• 10 MHz - 10 GHz Frequency Range
• Four Switch Selectable Fundamental Frequencies: 10 MHz, 64 MHz, 100 MHz,133 MHz

MAGNETIC FIELD MEASUREMENT PROBE 300 KHZ..300 MHZ ETS-LINDGREN HI-4433

• Frequency Range: 300 kHz - 300 MHz
• Magnetic Field Sensing: 5-300 MHz
• Automatic Continuous Zeroing
• Data from each axis can be viewed individually
• Isotropic Detection

QUAD-RIDGED OPEN BOUNDARY HORN ANTENNA 300 MHZ..6 GHZ ETS-LINDGREN 3164-06

• Frequency Minimum 300 MHz
• Frequency Maximum 6 GHz
• Connectors SMA Female (2)
• Cross Polarization Isolation >25 dB
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 50 W
• Linear or Circular Polarization (With Hybrid)

EMC AND RF MICROWAVE ABSORBERS ETS-LINDGREN

• EMC Anechoic Absorber
• Ferrite Tile Absorber
• FerroSorb FS EMC Absorber
• FerroSorb PS EMC Absorber
• Ultra Broadband Microwave Absorber

RFI/ EMI CONTROL FILTERS FOR ALARM, DETECTION AND MONITORING SYSTEMS ETS-LINDGREN N296X/ N2972

• Tubular, flat-pack or modular design
• Attenuation from 100dB at 10kHz
• Suitable for EMI, EMP and Tempest protection
• 24V DC and 250V AC/DC options

PART #	Current Max (Amps)	Voltage Max (Volts)	Frequency (Hz)	Number of Lines	Volt Drop on Full Load in a 250V 50/60Hz System per Line (Max)	Full Load Dissipation
5000	16	250	DC/50/60/400	2	1.3	20
5001	16	440/250	DC/50/60/400	4	0.65	20
5002	32	250	DC/50/60/400	2	0.3	20
5003	32	440/250	DC/50/60/400	4	0.15	20
5004	63	250	DC/50/60/400	2	0.4	48
5005	63	440/250	DC/50/60/400	4	0.2	48
5006	100	250	DC/50/60/400	2	0.3	60
5007	100	440/250	DC/50/60/400	4	0.15	60
5008	200	250	DC/50/60/400	2	0.2	80
5009	200	440/250	DC/50/60/400	4	0.1	80