Model	Frequency	E-Plane	H-Plane	Maximum Continuous Power	Antenna Factor	Gain	Typical Field Strength
3161-01	1.00 - 2.00 GHz	26°	26°	550 W	16.9 dB (1/m)	16.3 dBi	700 V/m
3161-02	2.00 - 4.00 GHz	22°	22°	250 W	22.3 dB (1/m)	17.5 dBi	500 V/m
3161-03	4.00 - 8.00 GHz	22°	22°	250 W	28.3 dB (1/m)	17.5 dBi	500 V/m

Physical Specifications Comparison

Model	Connectors	Wave Guide No.	Weight	Width	Depth
3161-01	Type N female	WR - 650	8.00 kg ( 17.64 lb )	53.14 cm (20.92 in)	88.05 cm (34.67 in)
3161-02	Type N female	WR - 320	5.00 kg ( 11.02 lb )	34.61 cm (13.63 in)	59.34 cm (23.36 in)
3161-03	Type N female	WR - 159	2.00 kg ( 4.41 lb )	17.47 cm (6.88 in)	31.88 cm (12.55 in)

More products ETS-LINDGREN

EMC AND RF MICROWAVE ABSORBERS ETS-LINDGREN

• EMC Anechoic Absorber
• Ferrite Tile Absorber
• FerroSorb FS EMC Absorber
• FerroSorb PS EMC Absorber
• Ultra Broadband Microwave Absorber

BICONICAL ANTENNA FOR TESTING IEC 1000-4-3 20..300 MHZ ETS-LINDGREN 3109

• Frequency Minimum 20 MHz
• Frequency Maximum 300 MHz
• Connectors Type N (f)
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 2 kW
• Pattern Type omnidirectional
• Peak Power 3 kW
• Polarization linear

CURRENT MEASUREMENT PROBES 10 KHZ..1000 MHZ ETS-LINDGREN

• 10 kHz..1000 MHz Frequency ranges
• For Standards Testing and Pre-compliance Applications
• Measures RF Current Without Direct Connection

QUAD-RIDGED OPEN BOUNDARY HORN ANTENNA 2..18 GHZ ETS-LINDGREN 3164-05

• Frequency Minimum 2 GHz
• Frequency Maximum 18 GHz
• Connectors SMA Female
• Cross Polarization Isolation >24 dB
• Impedance (Nominal) 50 ?
• Maximum Power 25 W
• Pattern Type directional
• Polarization dual linear

HIGH PERFORMANCE POWER FILTERS FOR TEMPEST/ RFI/ EMI TEST CURRENTS 6..100A ETS-LINDGREN N255X

• Maximum protection in Tempest and EMPP applications
• Highest performing commercially available power line filter
• Over 100dB insertion loss from 10 kHz to 10 GHz
• Fully accessible end chambers
• RoHS compliant and CE marked for compliance with the low voltage directive

HIGH CURRENT POWER RFI/EMI PROTECTION FILTERS IN SINGLE PHASE NETWORK 400..800A ETS-LINDGREN N2510

• >3000 Amp capability
• Fully accessible end chambers
• 80 dB Insertion Loss From 100 kHz to 10 GHz
• Excellent strength to weight ratio
• RoHS Compliant and CE Marked for Compliance with the Low Voltage Directive
• High current capability
• Compact design

HIGH PERFORMANCE CONTROL FILTERS FOR TEMPEST/ EMP/ EMI APPLICATIONS CURRENTS 2..10A ETS-LINDGREN N502X/ N503X

• Current Rating 2 Amps
• Number of Lines 2
• Voltage Frequency Maximum 100/DC
• Current range up to 10 Amperes
• Protection for Tempest and EMP
• Low volt drop
• AC and DC Options

BROADBAND BICONICAL ANTENNA 30 MHZ..1 GHZ ETS-LINDGREN 3182

• Frequency Minimum 30 MHz
• Frequency Maximum 1 GHz
• Connectors Type N (F)
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 200 watts

DOUBLE-RIDGED MICROWAVE GUIDE HORN ANTENNA 750 MHZ..18 GHZ ETS-LINDGREN 3115

• Frequency Minimum 750 MHz
• Frequency Maximum 18 GHz
• Connectors Type N (f)
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 500 W
• Pattern Type directional
• Polarization linear

GTEM TEST CELL FOR EMC RADIATED EMISSIONS & IMMUNITY ETS-LINDGREN 5405

• Frequency: DC - 20 GHz (RI) 2 9 kHz - 5 GHz (RE) 1
• Post Production
• For all Phases of EMC Testing - Design Qualification - Pre-Compliance
• Full Compliance IEC 61000-4-3 ANSI C63.4