The ETDR 10A-1 has been designed for quick and accurate fault location and qualification of balanced telecommunication cables using impulse reflection technique. The various measuring modes provide accurate location of discontinuities and errors like open circuit, wet section, loose contact etc. Loop Pulsing Device (ES 2002) is available to make the TDR measurements easier when the test object is a branched network. ETDR 10A-1 employs optimized pulsing and sampling methods, supported with advanced filtering and signal processing techniques, to reach the maximum measurement range and clean waveform for easier fault interpretation. ETDR 10A-1 is designed for ease-of-use. If you select the cable type from the on board cable library and set the measurement range covering the length of the cable to be tested, V/2, gain, pulse width, and the distance dependent compensation of cable attenuation are automatically set as default. 3 to 10 ns pulse widths for close-in resolution. Faults as near as 0.5 m from the pedestal can be easily located. Help facility with sample traces and useful topic related information.

Features:

• TDR for balanced cables

• Easy to operate

• Automatic detection of the fault

• Small size, suitable for using in the field at different weather conditions

• Widest range in a hand-held cable fault locator up to 16 km

• Language selectable: English, Italian

• Dual balanced input enables

Examination of live lines

Comparison of two live lines

Difference between two live lines

Location of crosstalk points

Location of intermittent faults

Comparison of live line to memory

Difference between live line and memory

• 100 memories for waveform and setting storage

• Clear waveform display of full trace for accurate diagnosis, 320 x 240 LCD color display with backlight

• Zoom for detailed examination

• Cable library for standard and user defined cable types

• Results can be transferred to PC via USB cable, via WLAN or can be stored on memory stick.

• Internal rechargeable lithium-ion battery

More products ELEKTRONIKA

ISDN ANALYSER EIT 10

• BRI TE and NT simulation, monitoring
• PRI TE and NT simulation, monitoring
• Dual U interface for troubleshooting between the NT and the Exchange
• B-channel voice and D-channel signaling monitor
• EDSS1, V5.1/V5.2, QSIG, SS7 protocols
• Analysis of CAS (R1,5; R2

CABLE FAULT LOCATOR ELEKTRONIKA ECFL30

• Capacitance Measurements
• DC Fault Location Methods
• AC Fault Location Methods
• Graaf Fault Location Method
• TDR Measurements

6 MHZ LEVEL TEST SET ET 92

• Comfortable End to End Measurements
• High Resolution Spectrum Analyzer
• USB Ports for Result and Setup Transfer
• Memory for Test Setups

VDSL LINE QUALIFIER ELQ 35

• Service Telephone Function
• PC Supported Spectrogram
• Long Time Micro Interruption Measurement
• Long Time Impulse Noise Measurement

2,4 MHZ LEVEL TEST SET ET 91

• Psophometer
• Autmatic End to End Measurements
• High Resolution Spectrum Analyzer
• Measuring Bridge
• Memory Locations for Test Setups

UNIVERSAL COPPER QUALIFIER ELQ 30A+

• Analogue measurements on leased or switched circuits 20 Hz to 20 kHz
• Analogue-to-analogue measurements on PCM systems
• Loop holding and dialling (pulse or DTMF) for dial-up circuit testing
• Built-in loudspeaker and microphone, service telephone
• In-service talk/listen and voice monitoring facility

DATA LINE ANALYSER ELEKTRONIKA ELA 10

• Service telephone facility
• Loop holding and dialing (pulse and DTMF) for dial-up circuit testing
• Acoustic pair detection facility
• AC-DC Voltage measurement
• Memory for phone numbers
• In-service talk/listen and voice monitoring

LAN TESTER ELT 10

• Simple, menu controlled operation
• Intelligent measurement port
• Storage of setups and results/statistics
• Results can be logged on PC via USB
• Software upgrade via USB

TELEPHONE & EXCHANGE TESTER ETT 10

• Hand-held programmable instrument with microprocessor control
• Testing of subscriber lines, exchanges and telephone sets
• Hand-held programmable instrument with microprocessor control
• Ring generator for testing telephone sets
• Battery for feeding the telephone line with DC current

XDSL LINE QUALIFIER ELQ 2+

• TDR for fault location
• Load coil detection facility
• DC-AC bridge option
• 2.2 MHz frequency range for fix-frequency and spectrum measurements
• Longitudinal voltage protection