The Digital Line Analyser EDCT 20 is a hand-held, battery operated, multi-function measuring instrument for in or out-of-service bit error and signal measurements. EDCT 20 can work in both unframed and framed modes for end-to-end and loopback testing of digital channels. It offers features such as: timeslot monitoring; timeslot access; set-ups and result storages. With the installation of the optional data communication unit, EDCT 20 is able to verify the interfaces (V.24, V.35 and V.11) between the DTE (Data Terminal Equipment) and the DCE (Data Communication Equipment), both in synchronous and asynchronous systems. Results can be stored in it's non-volatile memory or logged on PC via USB.

Features:

• 2048 kbit/s framed / unframed transmitter and receiver with through mode capability

• Codirectional (G.703) interface

• 2048 kbit/s slip measurement

• Interface parameters to ITU-T Rec. G.703

• Graphical displaying of signal pulse shape

• Jitter, jitter tolerance and transfer characteristic measurement

• PCM30, PCM30CRC, PCM31, PCM31CRC frame analysis

• nx64 kbit/s testing

• Line signal frequency measurement

• Mux / Demux measurements

• BER test to ITU-T Rec. G.821, G.826, M.2110, M2120

• CAS status analysis

• Analysis of CAS (R1.5, R2) systems

• EDSS1, V5.1/V5.2, QSIG, SS7 protocols

• Auto-configuration function

• PC software for analysis of signalling data and control

More products ELEKTRONIKA

DATA LINE ANALYSER ELEKTRONIKA ELA 10

• Service telephone facility
• Loop holding and dialing (pulse and DTMF) for dial-up circuit testing
• Acoustic pair detection facility
• AC-DC Voltage measurement
• Memory for phone numbers
• In-service talk/listen and voice monitoring

SIGNALLING ANALYSER ELEKTRONIKA ESA 10

• External clock input
• 320 x 240 dot LCD display
• LED indicators showing settings and status of line signal
• Selectable English or Russian languages
• Internal rechargeable battery-pack
• USB interface to connect to PC

TELEPHONE, EXCHANGE & DSLAM TESTER ETET 30

• SIX INSTRUMENTS IN ONE
• DMM LINE TESTER
• EXCHANGE SIMULATOR
• TELEPHONE SIMULATOR
• GOLDEN MODEM
• SPECTRUM ANALYZER
• TDR

UNIVERSAL COPPER QUALIFIER ELQ 30A+

• Analogue measurements on leased or switched circuits 20 Hz to 20 kHz
• Analogue-to-analogue measurements on PCM systems
• Loop holding and dialling (pulse or DTMF) for dial-up circuit testing
• Built-in loudspeaker and microphone, service telephone
• In-service talk/listen and voice monitoring facility

VDSL LINE QUALIFIER ELQ 35

• Service Telephone Function
• PC Supported Spectrogram
• Long Time Micro Interruption Measurement
• Long Time Impulse Noise Measurement

2,4 MHZ LEVEL TEST SET ET 91

• Psophometer
• Autmatic End to End Measurements
• High Resolution Spectrum Analyzer
• Measuring Bridge
• Memory Locations for Test Setups

CABLE FAULT LOCATOR ELEKTRONIKA ECFL30

• Capacitance Measurements
• DC Fault Location Methods
• AC Fault Location Methods
• Graaf Fault Location Method
• TDR Measurements

6 MHZ LEVEL TEST SET ET 92

• Comfortable End to End Measurements
• High Resolution Spectrum Analyzer
• USB Ports for Result and Setup Transfer
• Memory for Test Setups

ISDN ANALYSER EIT 10

• BRI TE and NT simulation, monitoring
• PRI TE and NT simulation, monitoring
• Dual U interface for troubleshooting between the NT and the Exchange
• B-channel voice and D-channel signaling monitor
• EDSS1, V5.1/V5.2, QSIG, SS7 protocols
• Analysis of CAS (R1,5; R2

DIGITAL LINE ANALYSER EDCT 20

• PC software for analysis of signalling data and control
• Storage of set-ups and results
• Voice channels monitoring through built in speaker
• External clock input
• Selectable English or Russian languages
• LED indicators showing status of line signal