When a vacuum circuit breaker is commissioned or undergoes routine tests, it is very important to be able to ascertain whether or not the Vacuum Interrupter (VI) is intact before putting it back into operation.

VIDAR enables you to check the integrity of the vacuum interrupter quickly and conveniently by means of the known relationship between the flashover voltage and the vacuum interrupter. A suitable test voltage (DC) is applied to the breaker, and the result is known immediately.

Features:

Tests the integrity of vacuum interrupters quickly, safely and easily
User defined voltage selection
Extensive voltage range
Easy to operate. Follows ANSI/IEEE standardized DC test methods.
Lightweight and portable

Alte produse MEGGER

PUNTE PENTRU MASURAT TANGENTA UNGHIULUI DE PIERDERI DIELECTRICE MEGGER DELTA4000

• fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set
• Voltage: 25 V to 12 kV, 1 V resolution
• Current : 0 to 5 Amps, 0.1 µA maximum resolution
• Capacitance: 0 to 100 µF, 0.01 pF maximum resolution
• Inductance: 6 H to 10 MH, 0.1 mH maximum resolution
• Power factor PF : 0-100% (0-1), 0.001% maximum resolution
• Dissipation factor DF : 0-100 (0-10,000%), 0.001% maximum resolution
• Watt Loss: 0 to 2 kW
• Automatic and manual operation
• Accurate and repeatable measurement results with high noise suppression
• Lightweight, rugged two-piece design

MULTI-AMP CIRCUIT BREAKER TESTER RETROFIT MEGGER DDA16, DDA30 AND DDA60

• Drop-in retrofit capability to the Multi-Amp Model CB-9116, Model DB-8130 and Model CB-8160 circuit breaker test sets
• Digital Signal Processing (DSP) technology
• Variable pulse time and firing-angle output-current control
• Complies with NEMA AB-4 Test Guidelines

HIGHLY PORTABLE MICRO-OHMMETER WITH DUALGROUND SAFETY MEGGER - DLRO100E, DLRO100X AND DLRO100H

• CAT IV 600 V for safe operation
• Light, 100 A, battery powered unit for portability
• High noise immunity for stable readings
• Smooth DC output for circuit breaker testing

BOND TESTER MEGGER - BT51

• High test current
• Four terminal measurement
• Two measuring ranges (2000 mO. and 20,00 mO.)and maximum resolution of 0,01 mO.
• Protected against inadvertent connection to the mains supply

PRIMARY CURRENT INJECTION TEST SYSTEM MEGGER ODEN AT

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Modular design to permit optimal user configuration of output current vs. unit size
• Compact transport cart facilitates portability into switchgear rooms with limited space
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result

ANALIZOR INTRERUPATOARE MONOFAZATE MEGGER EGIL

• Suitable for testing timing and travel on all circuit breakers with single interrupter per phase
• Extremely easy-to-use and reliable
• Two separate timing channels for measurement of auxiliary contacts
• Analog measurement channels for travel transducers or general voltage/current measurements
• Static and dynamic resistance measurements along with the SDRM201 accessory

TESTER DE IZOLATIE SI CONTINUITATE CU ALARMA MEGGER - MIT200 SERIES

• Sunt disponibile doua sau trei tensiuni de test asigur½nd solutia ideala pentru majoritatea aplicatiilor din zona tensiunilor joase
• Masurarea rezistentei de izolatie p½na la 1000 M? pe toate domeniile
• Descarcarea automata ne asigura ca toate circuitele sunt descarcate sigur dupa ½ncheierea testelor
• Tensiunea de test a izolatiei de 1000 V are o avertizare de ½nalta tensiune ½nainte de a aplica tensiunea

REFLECTOMETRU TDR LOCALIZARE DEFECTE CABLU MEGGER TDR500/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO selection of gain and pulse width.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

TESTER DE TENSIUNE VOLTMETRU ELECTRICIAN MEGGER TPT420 CATIV 1000V

• CAT IV/1000 V
• Clasificare IP64
• 12 până la 1000 V AC
• 12 până la 1500 V DC
• Funcție de testare a continuității cu indicație vizuală și acustică
• Indicare tensiune fără baterii
• Test de tensiune unipolar
• Indicare rotație fază
• Lanterna integrată

TRUSA CURENT-TENSIUNE VERIFICAREA RELEELOR DE PROTECTIE MEGGER SMRT410

• Small, rugged, lightweight and powerful
• Operates with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power output (60 Amps/300 VA rms) per phase
• Flexible output design provides up to 4-phase voltage and up to 10-phase current
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software