� Measures logical network performance
� Evaluate capability of link connections and locate faults up to 500 meters
� 1000BASE-T, auto measurement of signal performance, wiremap and length
� Large high resolution backlit display
� 1 kHz analogue tone signal output
� Built in TDR and TDX

Evaluate the capability of link connections and locate faults up to 500 meters
Detect Wiremap failure (Pass, Fail, full Wiremap details (extended test))
RJ45 and BNC connectors
10 BASE-T and 100 BASE-TX Ethernet, half- or full- duplex support
1000 BASE-T, Auto measurement of signal performance, wiremap and length
1 kHz analogue tone signal output suitable for all probe sets

NET200 is an all-in-one and easy-to-use network testing unit measuring logical network performance and the physical condition of network cables. It is the tool of choice, allowing network engineers to install and efficiently maintain local area network (LAN) with 10BASE-T and/or 100BASE-TX based Ethernet protocol.

It provides round-trip time (RTT) testing to measure network speed under dynamic and static configuration protocols and IP scanning to show the information on all terminals connected with the local network. It can also evaluate the capability of link connections such as supported network speed (10BASE-T or 100BASE-TX) and duplexity (half- or full- duplex).

The device provides physical information for the LAN cable under tests such as cable length, faulty positions (open or short) and Wiremap (Pass/Fail).

With the novel high-resolution graphic TDR (Time-Domain Reflectometer) and TDX (Time-Domain Crosstalk), it is possible for the user to locate faulty positions along cables up to 500 meters in length.

The TDR and TDX can also be used with other types of cable, such as coaxial cables for cable TV and HFC networks and telephony cables.

The NET200 is supplied as a kit comprising a complete set of testing cables and adapters, and has one of the largest selection of functions available in its class. This makes the NET200 one of the best feature to value instruments on the market today.

Accesorii standard

1 x NET200 MTDR 1002-856

Included accessories

1 x AC-DC Power adapter 2003-184

1 x BNC to F-connector 2003-181

1 x RS232 to USB adapter cable 2003-183

1 x DC Car charge lead 2003-200

1 x Portable bag 2003-189

3 x Power cord (US, EU, UK) 2003-187

1 x Remote identifier #1 2003-180

Optional accessories

Remote identifier #2 2003-193

Remote identifier #3 2003-194

Remote identifier #4 2003-195

Remote identifier #5 2003-196

Remote identifier #6 2003-197

Remote identifier #7 2003-198

Remote identifier #8 2003-199

Mobile printer 2003-201

Alte produse MEGGER

TESTER MULTIFUNCTIONAL INSTALATII ELECTRICE MEGGER MFT1710 MFT1720 MFT1730

• Two and three wire non trip loop testing for fast repeatable results
• Large bright LCD display showing dual parameters
• loop resistance and fault current
• insulation resistance and test voltage
• Phase rotation indication for verification of rotating machinery
• 3-phase RCD testing for industrial applications with no earth
• 3-terminal earth test for electrode resistance measurement
• On-board data storage and Bluetooth® download

TESTER RAPORT TRANSFORMARE, DEPLASARE FAZA, REZISTENTA INFASURARE TRANSFORMATOARE MEGGER TTR100

• Tests turns ratio, phase displacement, excitation current, vector group, winding resistance and polarity
• Fully automatic; fast; easy-to-use; handheld; robust; lightweight
• Battery powered with power-saving and shutdown function
• Alphanumeric keyboard
• RS232 for data transfer and printing
• Stores 200 test results and 100 user-defined transformer test settings

AC VOLTAGE DETECTORS MEGGER - VF3

• Non-contact detection of AC voltage
• Automatic audible warning buzzer
• Bright red voltage indicator in tip
• Ultra bright LED torch

EARTH LEAKAGE CLAMPMETER MEGGER - DCM300E

• 0.01 mA resolution
• EMC and IEC61010-2-032 compliance
• 30 mA, 300 mA, 30 A and 300 A range

APARAT PENTRU MASURAREA RIGIDITAII DIELECTRICE A ULEIULUI ELECTROIZOLANT MEGGER OTS60AF OTS80AF OTS100AF

• Test voltages : 60 kV, 80 kV and 100 kV
• Laboratory instruments for measuring insulating oil breakdown voltage
• Lock in precision � oil vessel with lockable adjustment
• Bright 3.5� colour display
• Suitable for mineral, ester and silicon oils
• Trip detection circuit with direct measurement of voltage and current
• Ultra fast (< 10 �s) HV switch off time

DIGITAL CLAMP METER MEGGER - DCM310 AND DCM320

• Option of current only , DCM310 or multimeter, DCM320 models
• Measures up to 400 A a.c. with low current ranges for improved resolution
• 600 V a.c./d.c. DCM320
• 20 MO Resistance DCM320

MICRO OHMMETRU 10A MEGGER DLRO10X

• up to 10A current
• Accurate results in under three seconds
• Auto current reversal cancels standing emfs
• Fuse protected to 600 V
• NiMH battery reduces weight
• 250 mW power limit (with optional override) to avoid heating the test sample

TESTER LUNGIME CABLURI ELECTRICE, PUTERE, TELEFONIE CATV LAN SI REFLECTOMETRU TDR MEGGER TDR900

• Full autoranging for measuring the length of power, telephony, CATV and LAN cables, provides distance to an open or short.
• Extra large, high resolution backlit LCD.
• Automatic output impedance control of 25, 50, 75, 100, 125 or 150 ohms.
• User-friendly menu on screen operation.
• Cable length calibration function.
• Internal library of 39 standard cable types.

PRIMARY CURRENT INJECTION TEST SYSTEM MEGGER ODEN AT

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Modular design to permit optimal user configuration of output current vs. unit size
• Compact transport cart facilitates portability into switchgear rooms with limited space
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result

REFLECTOMETRU 2-CANALE LOCALIZARE DEFECTE CABLU MEGGER TDR2000/2P

• TDR20000/2P can perform single or dual channel measurements on a wide range of metallic cables
• dead or Live cables to CATIII 300V Phase to earth or 415V phase to phase can be tested.