Megohmmetru rezistenta izolatie 5kV Megger S1-568
PRODUS OBSOLET ( * SCOS DIN UZ )

Cod: Megger S1-568


 

Brosura produs PDF, 0.17 Mb

Descriere

• 5 kV insulation resistance tester

• Proven ability to make accurate stable measurements in noisy environments such as 765kV substations
• Rapid charge of capacitive loads such as HV power cables
• Additional safety in high energy locations with remote operation
• Always ready to test with fast charge Li-ion battery or a.c. source operation
• Designed to survive harsh environments

 

S1-568 5 kV insulation resistance testers has been designed, specified and tested to meet the stringent requirements of power utilities in the 21st century. In addition to being tough, high performance insulation testers the S1-568 Megger offers the ability to perform accurate insulation resistance measurements in extreme, high noise environments, rapid charging of cable capacitance, and even remote operation for both convenience and safety. 

For service companies the S1-568 represents an excellent choice with its flexibility and future proofing capability. Quite simply the Megger S1-Series is designed to work wherever you work.

 

Accesorii standard

S1-568-UK 1003-017

S1-568-EU 1003-018

S1-568-US 1003-019

S1-568-AU 1003-020

S1-1068-UK 1003-008

S1-1068-EU 1003-009

S1-1068-US 1003-010

S1-1068-AU 1003-011

 

Included accessories

User guide CD-ROM

Safety warning sheet

Power lead

Screened USB cable with filters

PowerDB Lite software CD

Product information CD

3 m leadset x 3, medium insulated clips (S1-568, S1-1068) 6220-820

3 m leadset x 3, large insulated clips (S1-1068 only) 6220-811

 

Optiuni recomandate

Optional accessories

HV test leads

3 m leadset x 3, medium insulated clips 6220-820

3 m leadset x 3, large insulated clips 6220-811

3 m leadset x 3, bare clips 8101-181

8 m leadset x 3, bare clips 8101-182

15 m leadset x 3, bare clips 8101-183

Screened HV test lead sets

3 m, 5 kV screened un-insulated small clips 6220-835

15 m, 5 kV screened un-insulated small clips 6311-080

3 m, 10 kV screened un-insulated small clips 6220-834

10 m, 10 kV screened un-insulated small clips 6220-861

15 m, 10 kV screened un-insulated small clips 6220-833

Other

CB101, 5 kV calibration box 6311-077

Calibration certificate - CB101 1000-113

UKAS calibration certificate CB101 1000-047

Fused test probe and clip leadset 1002-913

Control circuit test leadset 6220-822

 

Alte produse MEGGER

TRUSA COMPLEXA PENTRU VERIFICAREA RELEELOR DE PROTECTIE MEGGER FREJA 400

• FREJA 403 3x60 A at 300 VA per phase.
• FREJA 406 Up to 6 channels: 3 x 60 A and 3 x 15 A
• FREJA 409 Up to 9 channels: 6 x 60 A and 3 x 15 A
• Voltage outputs : Up to four channels 300 V at 150 VA
• Fully automated testing using FREJA Win software
• PC operated or stand alone using the intuitive graphic touch screen
• High current, high power output (60 A / 300 VArms) per phase
• FREJA 409 provides 3 x 120 A in threephase configuration mode
• FREJA 406 provides 6 currents, and FREJA 409 provides 9 currents for transformer differential testing
• IEC 61850 test capabilities

 

INSTRUMENT TEST BOX MEGGER - MTB7671/2

• The only one that fully tests your instruments to the regs.
• Tests the full range of your tester½s capability not just what½s easy
• Won½t trip RCD protected circuits
• Checks insulation, continuity, loop and RCD functions of testers
• Works with all testers for Part P Certification

 

TESTER RELEE DE PROTECTIE MONOFAZATE MEGGER SMRT1

• Small, rugged, lightweight and powerful
• Operate with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power (75 Amps/400 VA rms)
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software

 

AC VOLTAGE DETECTORS MEGGER - VF1 AND VF2

• Socket outlets
• Fuses
• Switches
• Wires and cables
• Circuit breakers
• Luminares

 

TESTER TDR LOCALIZARE DEFECTE CABLURI MEGGER TDR1000/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

 

TRUSA ELECTRICIAN INSTALATII ELECTRICE MEGGER MTK310 MTK320 MTK330

• Three kit options available: Insulation, continuity, earth loop, RCD testing
• MTK310: Standard electrical test kit
• MTK320: Advanced electrical test kit
• MTK330: Result storage and downloading test kit
• Rubber armoured instruments
• Weatherproof IP54
• Test leads included
• Calibration certificates included
• 3 year warranty

 

TRUSA MASURA TANGENTA UNGHI DE PIERDERI TANGETA DELTA MEGGER DELTA4310

• fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set
• Voltage: 25 V to 12 kV, 1 V resolution
• Current : 0 to 5 Amps, 0.1 µA maximum resolution
• Capacitance: 0 to 100 µF, 0.01 pF maximum resolution
• Inductance: 6 H to 10 MH, 0.1 mH maximum resolution
• Power factor PF : 0-100% (0-1), 0.001% maximum resolution
• Dissipation factor DF : 0-100 (0-10,000%), 0.001% maximum resolution
• Watt Loss: 0 to 2 kW
• Automatic and manual operation
• Accurate and repeatable measurement results with high noise suppression
• Lightweight, rugged two-piece design

 

MICRO-OHMMETER MEGGER - MOM200A

• Easy to operate
• Designed for rugged field use
• Highly flexible cable connections
• Portable and lightweight, weighs only 14 kg (31 lbs)

 

TRUSA TESTARE TRANSFORMATOARE SI STATII TRANSFORMARE CAPACITATE FACTOR DE PUTERE SI DISIPATIE MEGGER TRAX

• Înlocuiește nevoia mai multor seturi de testare
• Sistem puternic, portabil și compact
• Reduce timpul de instruire a utilizatorilor și de testare
• Extinde durata de viață a transformatoarelor de putere
• Testarea stării izolației la 1 Hz
• Gestionează și analizează datele de testare

 

TESTER IZOLATIE COMUNICATII MEGGER MIT480/2 MIT481/2 MIT485/2 500V

• Testarea izolaţiei până la 500 V şi intervalul 100 GΩ într-un instrument portabil
• Conexiune cu 3 fire pentru conexiunea A, B şi E (vârf, inel şi împământare/împământare)
• Acces protejat la 500 V pentru a preveni deteriorarea accidentală
• CAT IV 600 V şi IP 54