Analizor logic portabil 68 canale Agilent 16802A

Cod: Agilent 16802A


 

Brosura produs PDF, 1.09 Mb

Descriere

  • 68-channel portable logic analyzer
  • 4 GHz (250 ps) timing zoom with 64 K memory
  • 1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
  • 500 MHz transitional timing
  • up to 450 MHz State clock rates
  • up to 500 Mb/s Data rates
  • up to 32 M acquisition memory depth
  • 15-inch (38.1 cm) color display with touch screen available(option 103)
  • Comprehensive single-ended signal support, threshold is adjustable in -5 V to 5 V (10 mV increments)
  • Automated threshold/sample position setup for accurate measurements on high-speed buses
  • Simultaneous eye diagrams on all channels identify problem signals quickly
  • Selectable memory depths: 1 M, 4 M, 16 M, 32 M
 

Optiuni recomandate

16800A-0B3

Service Manual

16800A-103

Front Panel with 15 inch display and touchscreen

16800A-109

External removable hard drive for 16800 series logic analyzers

16802A-001

Standard 1 M acquisition memory depth

16802A-004

Increase acquisition memory depth to 4M

16802A-016

Increase acquisition memory depth to 16M

16802A-032

Increase acquisition memory depth to 32M

16802A-500

Increase maximum state speed to 500 Mb/s

16802A-A6J

ANSI Z540 Compliant Calibration

E5346A

Probe, 34 channel single-ended Mictor connector, connects to 40-pin LA cable

E5383A

Probe, 17-channel single-ended flying leads, connects to 40-pin LA cable

E5385A

Probe, 34 channel single-ended Samtec connector, connects to 40-pin LA cable

E5394A

Probe, 34 channel single-ended soft touch connectorless, connects to 40-pin LA cable

E5394A-001

Retention Module

E5396A

Probe, 17 channel single-ended soft touch connectorless, connects to 40-pin LA cable

E5396A-001

Retention Modules

E5403A

Kit of 5 retention modules for Pro Series Soft Touch Connectorless Probes

E5404A

Probe, 34 channel, soft touch pro, single-ended, connects to 40-pin LA cable

 

Alte produse KEITHLEY

MODUL ACTUATOR/SWITCH 20 CANALE AGILENT 34903A

• 20 Channel Actuator/GP Switch
• SPDT (Form C) latching relays
• 300 V, 1 A actuation and control

 

MODUL PXI MATRICE RF 3GHZ DUAL 1 X 4, 75 OHM AGILENT M9150A

• RF signal routing to 3 GHz for 75 ohm applications
• Dual 1x4 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 43 dB isolation at 1 GHz

 

MODUL MATRICE DUAL/QUAD 4 X 8 AGILENT 34933A

• Dual 4x8, 8x8, or 4x16 2-wire configurations
• 64 2-wire or 128 1-wire cross-points
• High-speed reed relays

 

PUNTE MASURA CAPACITATI 120 HZ..1 MHZ AGILENT E4981A

• 120 Hz, 1 kHz, 1 MHz measurement frequency
• 0.07% Basic accuracy
• High-speed measurements to 2.3 ms @ 1 MHz

 

MODUL PXI MATRICE RF 3GHZ QUAD 1 X 4, 50 OHM AGILENT M9147A

• RF switching to 3 GHz
• Quad 1x4 50 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 1W switching
• 50 dB isolation at 1 GHz
• 1.3 dB insertion loss at 3 GHz

 

MODUL SWITCH PXI 50-CANALE 100VRMS/1A AGILENT M9132A

• General purpose switching to control external devices or
• switching in light loads or power supplies
• 50-channel SPST switch
• 100Vrms
• 1A switch/carry current
• 25W max power

 

ANALIZOR LOGIC PORTABIL 34 CANALE & GENERATOR LOGIC 48 CANALE AGILENT 16821A

• 34-channel portable logic analyzer
• 48-channel pattern generator
• 4 GHz (250 ps) timing zoom with 64 K memory
• 1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
• up to 250 MHz State clock rates
• up to 250 Mb/s Data rates
• up to 32 M acquisition memory depth

 

OSCILOSCOP DIGITAL 4 X 500 MHZ CU ANALIZOR LOGIC 16 CANALE AGILENT MSOX3054A

• 500 MHz bandwidth
• 4 analog channels plus 16 digital channels
• 2 GSa/s per channel sample rate, 4 GSa/s half-channel interleaved mode


GENERATOR SEMNAL RF 250 KHZ..3 GHZ SAU 6 GHZ AGILENT E4428C ESG

• 250 kHz to 3 GHz or 6 GHz
• 0.01 Hz resolution
• -136 to 17 dBm @ 1 GHZ and 10 dBm @ 6 GHz output power
• AM, FM, ØM, and pulse modulation

 

ANALIZOR DE SPECTRU 9 KHZ..3.6 / 7 / 13.6 / 26.5 GHZ AGILENT N9010A EXA

• 9 kHz to 3.6 GHz, 7.0 GHz, 13.6 GHz or 26.5 GHz
• 10 MHz (standard), 25 or 40 MHz (optional) analysis bandwidth
• Basic EMI precompliance measurement capability available
• Advanced analysis of more than 70 signal formats