60MHz-200MHz Bandwidth Oscilloscope;
Build in Video Help and 2G SD flash memory;
1GSa/s sample rate,1M Memory Depth, and 6000 Counts DMM with analog bargraph;
5.6 inch TFT Color LCD Display, high resolution (640*480).

Features:

High Bandwidth 60MHz-200MHz Oscilloscope, 1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
Built in Video Help and 2G SD flash memory.
1M Memory Depth.
High Refresh Rate (2500 frames).
Large 5.6 inch TFT Color LCD Display; High Resolution(640*480); Dual-Window Design --More clear, More Detailed
One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform.
Easy-to-use pop-up menu with built-in multi-language help system.
32 Automatic Measurements.
Waveform Math: Add, Subtract, Multiply, and Divide.
Store and recall over.
Automatic cursor tracking measurements.
XY Mode.
Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.
Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.
Pass/Fail function compares a stored waveform to an unknown input.
Average Mode for smoothing waveforms.
Square Wave Output (2V, 1kHz) for probe adjustment.
USB Host/Device 2.0 full-speed interface; support removeable disk; LAN Option, easy to control by PC or long-distance.
Dimensions (mm): 240(L)x165(W)x50(H), be carried easily.

Alte produse HANTEK

HANTEK DSO4004B OSCILOSCOAPE DIGITALE DE BANC

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Integrated USB Host/Device, convenient to communicate with PC. Support U-stick storage/systerm update.
• Support a variety of SCPI remote control command
• Support optional RS232 port, LAN port. (Optional)

HANTEK 6074BE OSCILOSCOP USB 4-CANALE

• The waveform data could be output to EXCEL,BMP,JPG.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.
• Provide secondary development library DLL; Provide LabviewVBVCQT developing examples.

HANTEK AC/DC CURRENT CLAMP CC-65 CLESTE CURENT CU EFECT HALL

• AC/DC frequency range: Up to 20 kHz
• Effective Measurement Range: 20mA to 65A DC
• It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.

HANTEK DSO8000 OSCILOSCOP PORTABIL CU MULTIMETRU

• Excellent Industrial Design. Direct key for Each Channel, time base, Trigger and DMM, easy to operate.
• Large 5.7 inch TFT Color LCD Display, LED backlight, Display clearly.
• USB Host/Device 2.0 full-speed interface, support removeable disk, LAN Option; Easy to control by PC or long-distance.
• Battery Power Operation (Installed) Industrial Design.
• Save waveform in the following: jpg/bmp graphic file, MS excel/word file.

HANTEK IDSO OSCILOSCOP USB

• Software Support:IOS,Android(Partial function),Win10,Win8, Win7, VISTA, etc.
• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
• FFT spectrum analyzer
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• The waveform data can be output as EXCEL, BMP, JPG according to time and voltage.

HANTEK DSO1000S OSCILOSCOP PORTABIL CU CANALE IZOLATE GALVANIC

• Isolated level: 1000V CATII, 600V CATIII.
• High Bandwidth 60MHz-200MHz Oscilloscope, 1GSa/s sample rate, 6000 Counts DMM with analog barograph and data recorder.
• 1M Memory Depth.
• High Refresh Rate (2500 frames).
• Large 5.6 inch TFT Color Display, High Resolution(640*480), Dual-Window Design --More clear, More detailed.

HANTEK AC/DC CURRENT CLAMP CC-650 CLESTE DE CURENT

• Power circuit measurement and malfunction analysis;
• Motor drive of frequency converter (or other electronics) measurement;
• Power electronics equipments measurement.

HANTEK DSO3000(A) SERIES (1GSA/S) OSCILOSCOP USB

• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.

HANTEK HT3000PE SURSE DE LABORATOR

• Green/Amber LCD back-light selectable.
• Auto interchangeable of regulated voltage and current.
• Multi-turn variable device to provide high precision voltage setting.
• Step-by-step current limit setting.

HANTEK 6000BD OSCILOSCOAPE PE USB

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.
• USBXI standard interface, easy to insert into USBXI case to constitute assembling instrument.