GOODWILL INSTEK GPM-8213

Cod: GOODWILL INSTEK GPM-8213


 

Brosura produs PDF, 1.83 Mb
       

Descriere

GW Instek GPM-8213 power meter is designed specifically for single-phase (1P/2W) AC power supply½s power measurements. Powerful features, including 4½ TFT LCD, five-digit measurement display, 19 power measurement parameters, integral measurement function, high-accuracy voltage/current/power measurement capabilities, front/rear panel input terminals, and various communications ports, are to facilitate users with clear, convenient, and accurate power measurements.

 

GPM-8213 provides as many as 19 power measurement parameters, including voltage (Vrms/ V+pk / V-pk), current (Irms/ I+pk / I-pk), frequency (VHz/ IHz), power (P/ P+pk / P-pk), crest factor (CFV/ CFI), apparent power (VA), reactive power (VAR), power factor (PF), phase angle (DEG), total harmonic distortion (THDV/ THDI), high-accuracy voltage/current/power measurement capabilities (reading: ½0.1%; level: ½0.1%). The advantages of TFT LCD have been efficiently deployed to simple mode and standard mode. Simple mode displays conventional power meter½s four measurement parameters to meet the requirement of accuracy and clarity for the test on manufacturing process. Standard mode extends the display to the maximum of 8 measurement parameters (2 major measurements + 6 monitor measurements) to satisfy the various measurement application requirements of R&D, design, and quality verification.

 

For DUT requiring IEC 62301/EN 50564 standby power consumption test, GPM-8213 provides the optimal measurement supports, including test frequency bandwidth of DC~6kHz, the minimum current level of 5mA (resolution: 0.1uA), power measurement resolutions (1uW for minimum current and voltage levels; 1mW for maximum current and voltage levels), crest factor reaching 3 (half range reaching 6), and measurement of total harmonic distortion (at least 13th order power harmonic). For large voltage /large current measurement applications of general power measurement, GPM-8213 provides PT / CT rate function to collocate with external potential transformer or current transformer to meet the measurement requirements.

 

Features:

  • 4½ TFT LCD
  • Two data display modes
  • Standard : two major measurement items + six secondary measurement items
  • Simple : displaying test data of four different measurement items
  • Met the requirement of IEC 62301 power measurement
  • Voltage/ current test frequency bandwidth : DC~6kHz
  • Watt resolution : 1mW
  • Lowest current range : 5mA, resolution : 0.1uA
  • Current/voltage measurements reach CF=3 for distorted wave and CF=6 for half range
  • W-h (power vs time)/A-h (current vs time) integration function
  • Total harmonic distortion measurement
  • Front panel test terminal
  • Standard interface : RS-232C, USB device, LAN
  • Optional interface : GPIB
  • Optional test fixture : GPM-001
 

Alte produse GW INSTEK

GOODWILL INSTEK MFG-2000 SERIES

• Earth Ground Isolation Design Among I/O Terminals and Instrument Chassis
• Frequency Counter : 150MHz, 8 bits
• AM/FM/PM/ASK/FSK/PSK/SUM/PWM Modulation
• USB Host/USB Device/LAN (MFG-22XX only)
• 4.3 Inch TFT Color Display

 

GOODWILL INSTEK PEL-3000E

• OCP?OPP test Automation
• Max. Slew Rate: 2.5A/us
• Dynamic mode
• Protection: OVP, OCP, OPP, OTP, RVP, UVP
• Remote Sense

 

GOODWILL INSTEK SPD-3606

• Remote output on/off control
• OVP to protect the DUT
• OTP to protect SPD-3606 to decreas the repair rate
• Compact size, light weight

 

GOODWILL INSTEK GFC-8270H & GFC-8131H

• Frequency and Period Measurement
• High Resolution at Both High and Low Frequency
• 0.01Hz~2.7GHz Frequency Range(GFC-8270H)
• 0.01Hz~1.3GHz Frequency Range(GFC-8131H)
• 10mV rms High Sensitivity

 

GOODWILL INSTEK GCT-9040

• AC 40A Ground Bond Tester
• Measuring Resistance from 1mO~650mO
• Connect with the GPT-9800/9900 series to become a multifunctional test or simultaneous test system
• 240x64 Ice Blue Dot Matrix LCD
• Function Key for quick selecting

 

GOODWILL INSTEK APS-7000E SERIES

• Only 88mm(2U) case height
• Measurement function comprises Voltage, Current, Power, Current(peak), Frequency, Power Factor
• 10 sets of the Test mode simulate power transient output
• 10 sets of Preset allow users to store ten settings

 

GOODWILL INSTEK GPM-8213

• Two data display modes
• Standard : two major measurement items + six secondary measurement items
• Simple : displaying test data of four different measurement items
• Met the requirement of IEC 62301 power measurement
• Voltage/ current test frequency bandwidth : DC~6kHz

 

GOODWILL INSTEK GPD-SERIES

• Output on/off
• Tracking Series and Parallel mode
• Smart cooling fan achieving low noise
• USB Standard Interface

 

GOODWILL INSTEK LCR-8000G SERIES

• Large LCD Display with Intuitive Interface
• Full Measuring Functions with DUT V/I Monitor
• PASS/FAIL Function ( abs, % or delta) with Judgment Alarm
• DC Resistance Measurement
• Multiple Step Mode

 

GOODWILL INSTEK PEL-2000A SERIES

• Multiple independent load inputs up to 8 channels in a mainframe
• Parallel connection of inputs for increased load capacity
• Parallel connection of inputs for static and dynamic tests
• OPP/OCP/OVP/OTP protections