Tester tensiune si continuitate Fluke T100

• Combine with any Fluke-700G Series Gauge, 1,000 psi range or greater, to make a complete pressure testing kit
• Generates pressure up to 10,000 psi range or greater, to make a complete pressure testing kit
• Connect the 700G Series gauge directly to the HTP-2 hand pump
• Includes 700HTH-1 hose kit and adapters for connecting to the pressure device to be tested
• Hard case protects pump and gauge and allows gauge to remain connected to the pump

 

• 8 input channels
• Fully IEC 61000-4-30 Class-A standard compliant
• Power quality statistics according to EN50160, DISDIP tables, ITIC, CEBEMA, ANSI
• 10 MHz, 6000 Vpk waveform capture
• GPS time synchronization
• records rms, min, max values for: Voltage Current Power P, Q, S Power Factor kWh Flicker Unbalance Frequency Harmonics Interharmonics

 

• Masuratori cheie: Rezistenta, tensiunea c.c. si c.a., intensitatea c.a. si c.c., variatia de tensiune ale bateriei, frecventa si temperatura bateriei.
• Analiza îmbunatatita a datelor: Comparati rapid tendinte, analizati rezultate si creati rapoarte cu ajutorul software-ului de gestionare a bateriei.
• Raportare usoara: Generati rapoarte PDF pe software-ul PC cu grafice de analiza si tabeluri de date sau trimiteti formatul raportului prin e-mail cu un fisier csv pe aplicatia mobila.
• Comunicatie wireless
• Port USB

 

• Ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to 600 PSI/40 bar
• Pump can be easily cleaned without disassembly
• The vernier can be used as a stand-alone low pressure calibration source
• Two pressure ports allowing simultaneous connection:
• ¼ -NPT female fitting for the reference gauge or pressure module
• ¼" NPT female fitting for the unit under test
• Adjustable stroke length can be set to limit the pressure per stroke

 

• hand operated hydraulic pressure pump
• designed to generate calibration pressures up to 10,000 psi/690 bar
• Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
• Integral pressure adjustment vernier knob for fine pressure adjustment
• Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
• Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
• Improved priming
• Improved stroke limiting mechanism

 

• Ecran tactil de 5” cu interfață intuitivă pentru utilizator
• Design mic, portabil, ergonomic, cu mâner integrat
• Automatizarea fluxului de lucru activată de OneQA elimină necesitatea unui laptop
• Capacitatea wireless vă permite să rulați proceduri de testare pe teren și să sincronizați automat rezultatele

 

• 4.5 digit large ¼ VGA display with white backlight
• 50,000 count
• 0.025% basic accuracy
• Logging function with TrendCapture
• Low input impedance function (LoZ)
• Motor winding and low ohm measurement range
• Low pass filter

 

• Measurement to 30 m (100 ft) with accuracy of 3 mm (0.12 in)
• Instant measurement with one-button operation.
• Easy targeting with bright laser.
• Quick calculation of area and volume.
• Easy addition and subtraction of measurements.
• Designed for indoor and outdoor use.

 

• 8.5 digit
• 2.7 ppm stability

 

• Multimetru wireless Fluke CNX 3000
• Modulul de curent c.a. wireless Fluke CNX i3000 iFlex
• Modul de tensiune c.a. wireless Fluke CNX v3000
• Modul cu cleste de curent c.a. wireless Fluke CNX a3000
• Modul de temperatura tip K wireless Fluke CNX t3000