4.5 digit large ¼ VGA display with white backlight
50,000 count
0.025% basic accuracy
Logging function with TrendCapture
Log multiple sessions or log data continuously for over 200 hours
i-info button on board help screens for measurement functions
Saved measurements allow you to name and recall measurements made in the field
Multiple sets of measurement information can simultaneously displayed at the same time.
Real Time Clock - for automatic time stamping of saved readings
Field upgradeable and expandable meter lets you stsay current as new capabilities are added
Multi-lingual interface
Min/Max/Average with Time Stamp to record signal fluctuations
Soft keys, scroll buttons and easy navigation control access to secondary functions.
100 kHz ac bandwidth
True-rms ac voltage and current for accurate measurements on complex signals or non-linear loads
Measure up to 10A (20 A for 30 seconds; 10A continuous)
100 mF capacitance range
Temperature function
Relative mode to remove test lead resistance from low ohms or capacitance measurements
Peak capture to record transients as fast as 250 µs
Premium test leads and alligator clips included
Optical USB PC communication interface
Limited lifetime warranty
CAT III 1000 V / CAT IV 600 V safety rated

Accesorii standard

Manual
6 AA Batteries, installed
TL71 Silicone Test Leads
Probe Holder
Two AC72 Alligator Clips
Registration Card
Cal Practices Document
CD-ROM Users' Manual (16 languages)
Getting Started Manual
Statement of Calibration Practices Document

Alte produse FLUKE

MULTIMETRU DIGITAL PORTABIL CU DATA LOGGING 4.5 DIGIT FLUKE 287

• 4.5 digit large ¼ VGA display with white backlight
• 50,000 count
• 0.025% basic accuracy
• Logging function with TrendCapture

FLUKE 190-504 190-504/S OSCILOSCOP PORTABIL DIGITAL 4X500 MHZ

• 4-canale izolate 500MHz
• Clasa de protectie CAT III 1000 V, CAT IV 600 V
• Multimetru digital dedicat cu 5000 de numărări la modele cu două canale
• Măsurători automate avansate, energie (Vpwm, VA, W, PF) ™ timp (mAs, V/s, w/s)
• Clasa de protectie IP-51 pentru praf şi lichide pentru a rezista in medii dificile
• Porturi USB izolate

CALIBRATOR CURENT DE BUCLA CU PRECIZIE FLUKE 709

• Functions: mA source, mA simulate, mA read, mA read/loop power and volts read
• Best-in-class accuracy at 0.01% reading
• Small rugged design operates on (6) standard AAA batteries
• Intuitive user interface with Quick-Set knob for fast setup, easy use
• Built in selectable 250 ? resistor for HART communication

CALIBRATOR DE PRESIUNE FLUKE 721

• 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor
• 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Measures 4 to 20 mA signals
• Internal 24 V loop power supply can power a transmitter under test
• Measure up to 30 V dc, check 24 V loop power supplies

CLESTE AMPERMETRIC DE CURENT TRUE-RMS AC/DC 200A FLUKE 365

• 200 A AC and DC current measurement with detachable jaw
• 600 V AC and DC voltage measurement
• True-rms AC voltage and current
• 6000 O resistance measurement

TERMOMETRU INFRAROSU CU CAMERA INTEGRATA FLUKE VT04A

• Interval de masurare a temperaturii : -10 °C si +250 °C
• Precizie: ±2°C sau ±2%
• Frecventa de captura a imaginii : 8 Hz
• Banda spectrala infrarosu : între 6,5 µm si 14 µm
• Câmp de vizualizare 28° X 28°
• Suport de stocare Card Micro SD
• Alarma de monitorizare automata

FLUKE TIS55 CAMERA DE TERMOVIZIUNE 220X165

• Fluke TiS10 80x60 pixels
• Fluke TiS20 120x90 pixels
• Fluke TiS40 160x120 pixels
• Fluke TiS45 160x120 pixels
• Fluke TiS50 220x165 pixels
• Fluke TiS55 220x165 pixels
• Fluke TiS60 260x195 pixels
• Fluke TiS65 260x195 pixels

MEGOHMETRU DIGITAL REZISTENTA IZOLATIE 250V/ 10KV FLUKE 1555

• Resistance Test range: 2 TO
• Test voltage: 10 kV

POMPA VACUUM GENERARE PRESIUNI JOASE FLUKE 700LTP-1

• hand operated pressure pump
• designed to generate either vacuum to -13 psi / -.90 bar or pressures to 100 psi / 6.9 bar
• Pump can be easily cleaned without disassembly
• Adjustable pressure relief valve with slow-bleed capability. Allows the slow release pressure at a controlled rate
• Quick fit connectors, one for the reference port for connection to a Fluke 700 series pressure module and one to connect to a unit under test
• Slim design, easy to carry and use

CALIBRATOR MULTIFUNCTIONAL DE PROCES CU HART FLUKE 754

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement
• HART Capabilities