Small, lightweight, self-contained portable instrument
Universal Power Supply. Input voltage from 85 - 265 VAC
Chassis Resistance measurements are made with a four-wire Kelvin bridge to eliminate errors due to cable length
Test method complies with AAMI load per ANSI/AAMI ES1-1993
Leakage Current can be measured in Open/Closed Neutral, Normal/Reversed Polarity and Open/Closed Ground
All Leakage Current measurements are displayed directly in µAmps

Features LT544Dplus Digital Safety Tester

Small, lightweight, self-contained portable instrument
Universal Power Supply. Input voltage from 85 - 265 VAC
Chassis Resistance measurements are made with a four-wire Kelvin bridge to eliminate errors due to cable length
Test method complies with AAMI load per ANSI/AAMI ES1-1993
Leakage Current can be measured in Open/Closed Neutral, Normal/Reversed Polarity and Open/Closed Ground.
All Leakage Current measurements are displayed directly in µAmps.

Specifications LT544Dlite Digital Safety Tester

Ground Resistance

Range:	0 - 19.99 ohms
Accuracy:	± 1% R, ± 1 LSD
Resolution:	10 mOhms

Leakage Current

Range:	0 - 1, 999 µA
Accuracy:	DC & 25 Hz - 1kHz: ±1% of reading, ± 3LSD
	1.0KHz - 100 KHz: ±2.5% of reading, ± 3LSD
	100 KHz - 1 MHz: ±5% of reading, ± 3LSD

Current Capacity

LT544D^Lite- 1515	15Amps at 120 VAC
LT544D^Lite- 230V	10Amps at 230 VAC
LT544D^Lite- 1520/2020	20Amps, at 230 VAC, 20% duty cycle (2 minutes on, 8 minutes off)

Controls

	1. Function Switch - 4 position rotary
	2. Neutral Switch - 2 position rocker (Open/Closed)
	3. Polarity Switch - 3 position rocker (Normal/Off/Reversed)
	4. Leakage Switch - 2 position rocker (Chassis/Earth)

DUT Power

85 - 265 VAC, 16 Amps@ 120 V, 10 Amps @ 230 V

Physical Size

3.5 x 6.2 x 1.6 inches (90 x 180 x 38 mm)

Specifications LT544Dplus Digital Safety Tester

Line Voltage

Range:	85 V ac to 265 V ac
Resolution:	1 Volt
Accuracy:	2 % Reading ± 1 LSD

Instrument Current

Range:	0 Amps to 19.99 Amps
Resolution:	10 mA
Accuracy:	5 % Reading ± 1 LSD

Ground Resistance

Range:	0 ohms to 19.99 ohms
Accuracy:	± 1 % Reading, ± 1 LSD
Resolution:	10 mOhms

Load Current

Range:	0 to 14.99A (LT544D^plus - 1515)
	0 to 19.99A (LT544D^plus-2020)
	0 to 9.99A (LT544D^plus-230V)
Accuracy:	± 4 % Reading, ±1 ISD

Leakage Current

Range:	0 µA to 1, 999 µA
Accuracy:	DC&25 Hz to 1 kHz: ± 1 % Reading, ± 3 LSD
	1 KHz to 100 KHz: ± 2.5 % of Reading, ± 3 LSD
	100 KHz to 1 MHz: ± 5 % of Reading, ± 3 LSD

Current Capacity

	LT544D^plus-1515: 15 Amps at 120 V ac
	LT544D^plus-230V: 10 Amps at 230 V ac
	LT544D^plus-2020: 20 Amps, at 120 V ac, 20 % duty cycle (2 minutes on, 8 minutes off)

Controls

	1. Function Switch - 4 position rotary
	2. Neutral Switch - 2 position rocker (Open/Closed)
	3. Polarity Switch - 3 position rocker(Normal/Off/Reversed)
	4. Leakage Switch - 2 position rocker (Chassis/Earth)

DUT Power

85 V ac to 265 V ac, 16 Amps @ 120 V, 10 Amps @ 230 V

Power Connectors

	LT544Dplus ....................Standard US
	LT544Dplus-EUR ..........Schuko

Physical Size

90 mm x 180 mm x 38 mm (3.5 in x 6.2 in x 1.6 in)

Alte produse FLUKE BIOMEDICAL

Brand: FLUKE BIOMEDICAL

ANALIZOR SECURITATE ELECTRICA SPITALE SI CLINICI FLUKE BIOMEDICAL ESA620

• Compliance with multiple standards
• Three test loads
• Expanded leakage ranges through 10,000 µA
• AC only, DC only and True RMS leakage readings
• 100 % and 110 % mains voltage for mains on applied part (lead isolation) test
• 20 A equipment current

Brand: FLUKE BIOMEDICAL

RATMETRU DIGITAL UNIVERSAL MONITORIZARE RADIATII FLUKE BIOMEDICAL 942A/ 946A/ 952A

• User adjustable alarm set-points; retained indefinitely on power outage, keylock protection available
• Front panel pushbuttons for check source activation, high voltage indication, alarm setpoint indication, alarm acknowledge, and power ON/OFF
• Small front panel size allows dedicated display for each channel while minimizing panel space
• Ability to use existing cables when replacing most analog readouts

Brand: FLUKE BIOMEDICAL

ANALIZOR SECURITATE ELECTRICA SALI MEDICALE FLUKE BIOMEDICAL ESA612

• Portable, ergonomic, lightweight, and easy to use
• Large, easy-to-read display with adjustable contrast
• Human-factors-designed user interface
• Tilt stand design for stand-up testing in field environments
• Five applied parts jacks and easy ECG snap connection

Brand: FLUKE BIOMEDICAL

ANALIZOR ECHIPAMENTE ELECTRO-CHIRURGIE FLUKE BIOMEDICAL QA-ES

• Automatic power distribution measurement, including power, current, peak-to-peak voltage closed load only), and crest factor
• High-frequency leakage measurements with accuracy of ± 2 % of reading
• 128 internal user-selectable test loads from 10 O to 5200 O
• Ansur QA-ES software plug-in for automated test protocols
• RS-232 and Centronic-printer interface

Brand: FLUKE BIOMEDICAL

TESTER MONITORIZARE NEUTRONI FLUKE BIOMEDICAL 190N

• Auto-scaling measurement of rate and dose (integrate mode includes dose and time accumulation)
• True Rem readings recorded across a wider (lower and higher) rate range
• Ergonomic, portable design: adjustable shoulder strap and rugged handle with padded grip
• Flexible detector assembly, 190 can be removed for remote readings
• Available in SI units

Brand: FLUKE BIOMEDICAL

DEFIBRILATOR STIMULARE IMPULSURI FLUKE BIOMEDICAL 6000D/ 7000DP

• Lown, Edmark, trapezoidal, biphasic and pulsed-biphasic defibrillation technology compatibility
• AED technology compatibility
• First-class measurement accuracy ± 1 % of reading + 0.1 J
• Intuitive user interface and backlight, easy-to-read display
• Portable, rugged, easy to carry

Brand: FLUKE BIOMEDICAL

TESTER ENDOSCOAPE RIGIDE FLUKE BIOMEDICAL DALE301

• Incoming acceptance inspection performed
• Simple to use
• Lightweight and companct
• No light source or other accessories required

Brand: FLUKE BIOMEDICAL

ANALIZOR SECURITATE ELECTRICA FLUKE BIOMEDICAL DALE 601E

• Small, lightweight, self-contained portable instrument
• Master range meter delivers accurate measurment for each test
• Accurate test measurements with 4-wire Kelvin bridge
• Test method complies with AAMI load per ANSI/AAMI ES1-1993 or IEC601-1
• Leakage Current can be measured in Open/Closed Neutral, Normal/Reversed Polarity and Open/Closed Ground
• All Leakage Current measurements are displayed directly in µAmps
• Broad range of external measurements
• Five (5) Universal EKG Lead Connectors
• The DALE601E is designed for 230 V operation

Brand: FLUKE BIOMEDICAL

ANALIZOR AUTOMAT SECURITATE ELECTRICA FLUKE BIOMEDICAL MEDTESTER 5000C

• Easy verification of biomedical equipment to manufacturer’s specifications
• Ten preprogrammed and five user-programmable electrical-safety-testing sequences
• Convenient transfer of equipment inventory and testing procedures from CMMS
• Automatic storage of detailed test results for printing or transfer to CMMS
• Compliant with ANSI/AAMI (1993) and NFPA-99 (2005) standards
• 20-A device testing with GFCI protection

Brand: FLUKE BIOMEDICAL

TESTER DOZIMETRU RADIATII RAZE X FLUKE BIOMEDICAL TNT 12000 X-RAY

• Choice of all-in-one detector, dosimeter, integral ma/mAs and handheld display or user’s own laptop interface.
• 100 % ZigBee wireless operation
• Compact handheld design
• Sets up in seconds
• Displays all values in one shot (all-in-one detector)