The MA3018 is a 3000A True RMS AC Flex Clamp Meter. The MA3018 features an 18 inch flexible clamp with LCD monitor. The True RMS measurements are for accurate readings of noisy, distorted or non-sinusoidal waveforms. Complete with two AAA batteries. UL listed and CAT IV 600V safety rating.

� Measure AC Current up to 3000A

� True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms

� Flexible 18" (45.7cm) clamp jaw easily wraps around bus bars and cable bundles

� 7.5mm cable diameter fits into tight spaces and around large conductors

� Measures AC Current in three ranges

� 3000 count backlit LCD display

� Over range and Low battery indicator

� Auto Power Off with disable

� Complete with two AAA batteries

Accesorii standard

18" Flexible Clamp Meter with LCD

� Measure AC Current up to 3000A

� True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms

� Flexible 18" (45.7cm) clamp jaw easily wraps around bus bars and cable bundles

� 7.5mm cable diameter fits into tight spaces and around large conductors

� Measures AC Current in three ranges

� 3000 count backlit LCD display

� Over range and Low battery indicator

� Auto Power Off with disable

� Complete with two AAA batteries

Alte produse EXTECH

EXTECH HD780 MANOMETRU DIGITAL DIGITAL

• Dual differential inputs for pressure and temperature
• Displays 5 types of pressure units
• For use with R22 and R410A refrigerants
• Standard 1/4 NPT male flare fittings

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

EXTECH DT200 TELEMETRU LASER MASURA DISTANTE PANA LA 35M

• Measures from 2" to 115' (0.05 to 35m)
• Laser measurement accurate to 0.08 inches at 32 feet
• Historical Storage recalls the previous 10 records (measurements or calculated results)
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean theorem

DINAMOMETRU MASURARE FORTA CU DATALOGGING EXTECH 475040-SD

• Features 5000g, 176 oz. and 49 Newtons measurement capacity
• Large dual backlit LCD with reversible display feature to match viewing angle
• Record data on SD card
• Updates reading every 0.2 seconds and sample rate is 1 second to 9 hours
• Integrated load cell measurement transducer

EXTECH MG310 TESTER DIGITAL IZOLATIE

• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)

EXTECH MA410 CLESTE CURENT 400A AC + DETECTOR FARA CONTACT

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• Compact size allows measurments in tight locations
• 1.2" (30mm) jaw size for conductors up to 350MCM
• Relative Mode for Capacitance Zero and Offset Adjustment

EXTECH EX410A MULTIMETRU PROFESIONAL CU 8 FUNCTII

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 10A max Current

EXTECH EX330 MINI-MULTIMETRU CU 12 FUNCTII + NCV

• Autoranging DMM with 12 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Large-digit 4,000 count LCD display
• 10A max Current

EXTECH 407736 SONOMETRU CU 2 SCALE

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

EXTECH CB20: CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate Circuit Breakers and Fuses
• Receptacle Tester (Transmitter): Test GFCI circuits, LED indication of 2 test conditions and 6 wiring faults, Test Reversed/Open Connections
• Complete with Receiver, Transmitter and 9V battery
• Microprocessor-based automatic sensitivity adjustment, Audible and visual indication, low battery indicator, Ergonomic design