Extech MA260 Cleste de curent deschis True RMS 200A AC

Cod: Extech MA260


 

Brosura produs PDF, 0.27 Mb

Descriere

Compact AC Clamp Meter with Built-In NCV Detector

The MA260 is a True RMS 200A AC Open Jaw Clamp Meter. The MA260 has a built in NCV detector and can measure up to 200A in its 0.6 in. open jaw. True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms. Complete with test leads and two AAA batteries. UL listed with a CAT IV 600V safety rating.

 

·         Smart Auto Sensing technology enables the meter to recognize the input and automatically switch to the correct mode of operation

·         For AC Voltage, Auto Sense feature evaluates input signal and adjusts Input Impedance to eliminate effects of ghost voltages

·         0.6" (16mm) open jaw size

·         True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms

·         Built-in non-contact voltage detector with LED indicator

·         10,000 count backlit LCD display

·         Smart Data Hold freezes the reading on the display and automatically changes if a new reading is larger than 50 counts

·         Auto Power Off with disable

·         Slim housing construction with built-in test lead holders

·         Complete with test leads and two AAA batteries

 

Alte produse EXTECH

EXTECH EX410 MULTIMETRU PROFESIONAL CU 8 FUNCTII

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 20A max Current
• Type K temperature measurements

 

EXTECH 380360 MEGOHMETRU DIGITAL

• Three test voltages of 250V, 500V and 1000V
• Insulation Resistance to 2000MOhm
• Safety Power Lock enables "hands free" operation for 3 minute test
• Automatic discharge when safety "Press to Test" button is released
• Continuity measurements to 200Ohm and Voltage to 600VAC

 

EXTECH CB20: CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate Circuit Breakers and Fuses
• Receptacle Tester (Transmitter): Test GFCI circuits, LED indication of 2 test conditions and 6 wiring faults, Test Reversed/Open Connections
• Complete with Receiver, Transmitter and 9V battery
• Microprocessor-based automatic sensitivity adjustment, Audible and visual indication, low battery indicator, Ergonomic design

 

EXTECH EX505 MULTIMETRU DIGITAL INDUSTRIAL REZISTENT CU 11 FUNCTII

• True RMS DMM with 11 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current

 

EXTECH ET38 TESTER TENSIUNE SI CONTINUATATE

• Voltage detection range: 12 to 300V AC
• Continuity tester
• LED light indicator
• Includes built-in screwdriver tip, pocket clip, and two button batteries

 

EXTECH MN26T MINITEC™ MULTIMETRU DIGITAL CU AUTO-SCALARE

• Large 2000 count LCD display
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Relative zero, Data Hold, Range Hold and Auto power off
• 10A fuse protection
• Overload protection and indication
• Includes protective holster with stand, general purpose Type K bead wire temperature probe, 2 AAA batteries and test leads

 

EXTECH 40180 GENERATOR DE TON CU SONDA AMPLIFICATOR IDENTIFICARE CIRCUIT

• Insulated inductive probe tip prevents shorting conductors
• Tests include wire trace, continuity test, clear/busy/ringing line test and tip/ring identification
• Alligator clips for non-terminated cables and modular connectors for direct connections to telephone and internet wiring
• Selectable continuous or variable tone generation
• Built-in speaker on probe with sensitivity control

 

EXTECH 380193 RLC-METRU PORTABIL COMPONENTE PASIVE

• Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
• Secondary parameter of Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or percentage limits
• Parallel or Series equivalent circuit
• Automatic blown fuse indication
• Built-in test fixture or use external test leads

 

EXTECH EX530 MULTIMETRU DIGITAL PORTABIL INDUSTRIAL

• True RMS DMM with 11 functions and 0.06% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current

 

EXTECH 380803 ANALIZOR PUTERE CU DATALOGGER

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer