The Extech 380400 Resistance Decade Box is very popular for product design testing and calibration because it can be substituted into a circuit and function in the place of any component with a standard value easily. Alternatively, it can be used to identify the best value for circuit operation then read that value from the switches. Then, a resistor of the size indicated by the decade box switches can be put into the circuit.

� Durable construction

� Case may be grounded separately

� 3 binding posts permit isolated substitutions

� 1% Resistance substitution from 1 to 11,111,110O

� Seven decade ranges of resistance

� Values can be set in 1O increments

Alte produse EXTECH

EXTECH HD750 MANOMETRU PRESIUNE DIFERENTIAL (5PSI)

• ±5psi range, 11 Selectable units of measure
• Max/Min/Avg recording and Relative time stamp
• Data Hold, Auto power off and Zero function
• Large LCD display with backlighting

EXTECH 38220 SURSA DE TENSIUNE 18V/3A

• Constant voltage or current
• Dual backlit LCD displays for voltage and current
• Short circuit protection
• Current limiting

DINAMOMETRU MASURARE FORTA INALTA 20KG EXTECH 475044

• Range: 44 lbs, 20kg, 196 Newtons (±0.5% accuracy)
• Ideal for a wide variety of applications in the electronics, automotive, chemical, plastics and machinery industries
• Reversible display and fast/slow response mode
• Exclusive load cell measurement transducer

EXTECH 381676A MULTIMETRU TIP STILOU CU 9 FUNCTII SI DETECTOR TENSIUNE FARA CONTACT

• Auto/Manual ranging pen-style multimeter
• Large 2000 count high contrast LCD display
• Built-in Non-Contact Voltage (NCV) detection with visible and audible alarm
• Data Hold, Range Hold, Maximum Hold, Auto Power Off

EXTECH AN25 ANEMOMETRU MASURA INDEX DE INCALZIRE

• Built-in multiparameter sensors measure Air Velocity, Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Dew Point, Wet Bulb, Temperature, and Windchill
• MIn/Max/Average (5sec/10sec/13sec)
• Data Hold, Auto Power Off with disable
• Replaceable Mini impeller (vane)
• Complete with CR2032 battery

EXTECH EX410A MULTIMETRU PROFESIONAL CU 8 FUNCTII

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 10A max Current

TESTER UMIDITATE EXTECH MO257

• Non-invasive moisture content measurements in wood/building materials
• Measures relative moisture of various building materials including wood, particle board, carpeting, and ceiling tiles using non-invasive Pinless Technology
• Multifunction backlit triple LCD display
• Pinless measurement depth from 0.78" (20mm) to 1.6" (40mm) below the surface
• High frequency sensing technology

EXTECH 380803 ANALIZOR PUTERE CU DATALOGGER

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer

EXTECH CT40 TESTER CU IDENTIFICATOR DE CABLU

• Troubleshoot electrical/electronic circuits and identify up to 16 local or installed lines
• MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Data Hold and Max Hold, Auto power off

EXTECH MO290 PSIHROMETRU UMIDITATE + TEMPERATURA INFRAROSU

• Measure Humidity, Air Temperature (with built-in probe) plus non-contact InfraRed Temperature
• Pinless moisture sensor allows to monitor moisture in wood and other building materials with no surface damage
• Remote pin-type probe (MO290-P) for contact moisture readings (3ft/0.9m cable length)
• Select from multiple wood types and measurement ranges
• Easy to read, large dual display with backlit feature