ETET 30 is intended to be installed in the central offices for the verification of telephone and xDSL services. In case of service loss it is an excellent tool to find out whether the failure source is within the exchange, the subscriber’s site or on the line.

Features:

DMM Tests
Exchange Simulation
Telephone Simulation
Golden Modem
- Actual bit rate (downstream / upstream)
- Line capacity
- SNR / Hlog / QLN / bit allocation / per tone
- Transmitted power
- Line attenuation
- Line alarms (LOS, LOF, LOP, LOM)
- Ping test / trace route
Spectrum Analyzer
TDR
USB Host Port for Data Transfer

Alte produse ELEKTRONIKA

TESTER TELEFONIE ELEKTRONIKA ETT 10

• Hand-held programmable instrument with microprocessor control
• Testing of subscriber lines, exchanges and telephone sets
• Hand-held programmable instrument with microprocessor control
• Ring generator for testing telephone sets
• Battery for feeding the telephone line with DC current

PUNTE MASURA DETECTIE DEFECTE CABLU ELEKTRONIKA ECFL30

• Capacitance Measurements
• DC Fault Location Methods
• AC Fault Location Methods
• Graaf Fault Location Method
• TDR Measurements

ANALIZOR LINII DATE TELEFONIE ELEKTRONIKA ELA10

• Service telephone facility
• Loop holding and dialing (pulse and DTMF) for dial-up circuit testing
• Acoustic pair detection facility
• AC-DC Voltage measurement
• Memory for phone numbers
• In-service talk/listen and voice monitoring

SET TESTARE NIVEL 6 MHZ LEVEL TEST SET ELEKTRONIKA ET92

• Comfortable End to End Measurements
• High Resolution Spectrum Analyzer
• USB Ports for Result and Setup Transfer
• Memory for Test Setups

ANALIZOR SEMNALE TELECOMUNICATII ELEKTRONIKA ESA10

• External clock input
• 320 x 240 dot LCD display
• LED indicators showing settings and status of line signal
• Selectable English or Russian languages
• Internal rechargeable battery-pack
• USB interface to connect to PC

CALIFICATOR RETELE CUPRU CABLU ELEKTRONIKA ELQ30A+

• Analogue measurements on leased or switched circuits 20 Hz to 20 kHz
• Analogue-to-analogue measurements on PCM systems
• Loop holding and dialling (pulse or DTMF) for dial-up circuit testing
• Built-in loudspeaker and microphone, service telephone
• In-service talk/listen and voice monitoring facility

ANALIZOR ISDN ELEKTRONIKA EIT10

• BRI TE and NT simulation, monitoring
• PRI TE and NT simulation, monitoring
• Dual U interface for troubleshooting between the NT and the Exchange
• B-channel voice and D-channel signaling monitor
• EDSS1, V5.1/V5.2, QSIG, SS7 protocols
• Analysis of CAS (R1,5; R2

TESTER SERVICII XDSL & TROUBLESHOOTER ELEKTRONIKA EX30M

• Transmitted power
• Line attenuation
• Line alarms (LOS, LOF, LOP, LOM)
• Line errors (FEC, CRC, HEC)
• Ping test / trace route

TESTER RETEA LAN ELEKTRONIKA ELT10

• Simple, menu controlled operation
• Intelligent measurement port
• Storage of setups and results/statistics
• Results can be logged on PC via USB
• Software upgrade via USB

TESTER LINII DE DATE DIGITALE ELEKTRONIKA EDCT2A

• CAS status analysis
• Auto-configuration function
• Storage of set-ups and results
• Voice channels monitoring through built in speaker
• External clock input