Affordably Accurate!

The m1 digital pressure gauge maintains 0.2% of reading accuracy from -10 to 50°C. Accuracy is not affected by dropping, over-pressure, vibration, temperature, or rapid pressure change. Available as a 30 psi digital manometer.

One wide range m1 digital pressure gauge replaces up to five 0.25% mechanical gauges with 0.2% of reading accuracy.

Features:

2-Year recommended calibration interval
Battery life up to 3 years continuous use
Bright backlit display
Easy to read extra-large numbers
Protective boot included
Shifts everyday wear to a replaceable CPF adapter

Alte produse AMETEK

AMETEK AMC910 PROCESS CALIBRATOR

• Read voltage (10V and 100V DC ranges to ½ 0.005%)
• Read current (0 to 50mA to ½ 0.01%)
• 24VDC loop power supply
• Selectable 250 ohm HART resistor

AMETEK T-900 SERIES (SYSTEMS A, B, AND H)

• Lightweight, compact design
• Two outlet ports
• Protected shuttle valve

AMETEK MACAL LOOP CALIBRATOR

• Source and Measure current to 24 mA with ½ 0.05% of full scale
• Measure voltage from 0 to 45 VDC with ½ 0.5 VDC
• 200 hours of life using 4 x AA batteries

AMETEK HPC40 SERIES PRESSURE CALIBRATOR

• High Accuracy Thermometer with "True Ohm" Technology
• Store & Recall Previously Used Screens
• Flexible Power Options Including Rechargeable

AMETEK ITC INDUSTRIAL TEMPERATURE CALIBRATOR

• Dry block calibrator
• Easy-to-read, backlit display with useful icons
• Lightweight and easy to carry
• Multi-hole insert kits

AMETEK ETC EASY TEMPERATURE CALIBRATOR

• Accuracy to ½ 0.5°C and Stability to ½ 0.05°C
• Time saving fast cooling and heating times
• Easy-to-read multi-information display

AMETEK WT SERIES DIGITAL PRESSURE GAUGE

• 0.1 % of reading accuracy
• Batteries and digital communications are accessible from the front
• Rugged "Wally Box" gauge can withstand dropping and accidental over-pressurization

AMETEK XP2I-DP DIFFERENTIAL PRESSURE GAUGE

• Record 32 000 data points
• Battery-optimizing, Ultra Low Power (ULP) Mode
• Over an entire year of continuous recording time

AMETEK NVISION REFERENCE RECORDER

• Differential Pressure with up to 0.025% of reading accuracy
• Switch, Voltage, Current, and Temperature
• 500 000 data points - 10 readings per second from 2 modules

AMETEK PTC PROFESSIONAL TEMPERATURE CALIBRATOR

• Temperature range from -90 to 660°C (-130 to 1220°F) with 5 models
• Accuracy to ½ 0.06°C and Stability to ½ 0.01°C
• Clean Dry block calibrator
• Time saving fast cooling and heating times (350° in only 7 minutes)