The Advanced Process Multi-Scanner offers unique time-saving and automation solutions to calibrate multiple pressure or temperature sensors simultaneously. Each ASM contains an eight channel scanner controlled by Jofracal software on a PC. It can handle signals from 2-, 3-, and 4- wire RTDs, TCs, transmitters, thermistors, and temperature and voltage switches. Up to 3 ASM units can be stacked to calibrate up to 24 sensors at the same time.

The ASM may be combined with any JofraCal compatible pressure calibrator, dry-block or liquid calibrators, DTI reference thermometers, and ASC multi-function process calibrators. Use any place where temperature measurement is critical and there is a need to create traceable documents for sensor calibration.

Features:

Automatic procedures reduce human error
Dedicate one input channel to a reference sensor with accuracy to 0.026°C
Uses True Ohm technology to eliminate EMF from cables, sockets, and sensors
A models use a separate measuring unit as the standard, and B models have built-in measurement capabilities
Set-up, execute, print, and save traceable calibration data
Calibrate up to 24 sensors using a dry-block calibrator as the reference
Calibrate using a high accuracy temperature reference probe directly with the ASM
Data-log up to 24 sensors simultaneously
Inputs for Thermocouple Calibration

Alte produse AMETEK

AMETEK MACAL LOOP CALIBRATOR

• Source and Measure current to 24 mA with ½ 0.05% of full scale
• Measure voltage from 0 to 45 VDC with ½ 0.5 VDC
• 200 hours of life using 4 x AA batteries

AMETEK DTI050 TEMPERATURE INDICATOR

• Wide selection of sensors (straight, 90°, cabled, etc.) to fit your application
• Useful features like hold, and min / max
• Power with a single 9V battery, or external 9V supply

AMETEK ETC EASY TEMPERATURE CALIBRATOR

• Accuracy to ½ 0.5°C and Stability to ½ 0.05°C
• Time saving fast cooling and heating times
• Easy-to-read multi-information display

AMETEK XP2I-DP DIFFERENTIAL PRESSURE GAUGE

• Record 32 000 data points
• Battery-optimizing, Ultra Low Power (ULP) Mode
• Over an entire year of continuous recording time

AMETEK ASM SERIES PROCESS MULTI-SCANNER

• Automatic procedures reduce human error
• Dedicate one input channel to a reference sensor with accuracy to 0.026°C
• Uses True Ohm technology to eliminate EMF from cables, sockets, and sensors

AMETEK NVISION LAB REFERENCE RECORDER

• Gauge / Absolute Pressure Datalogger to 15 000 psi / 1000 bar / 100MPa
• Differential Pressure with up to 0.025% of reading accuracy
• Switch, Voltage, Current, and Temperature
• 500 000 data points - 10 readings per second from 2 modules

AMETEK WT SERIES DIGITAL PRESSURE GAUGE

• 0.1 % of reading accuracy
• Batteries and digital communications are accessible from the front
• Rugged "Wally Box" gauge can withstand dropping and accidental over-pressurization

AMETEK AMC910 PROCESS CALIBRATOR

• Read voltage (10V and 100V DC ranges to ½ 0.005%)
• Read current (0 to 50mA to ½ 0.01%)
• 24VDC loop power supply
• Selectable 250 ohm HART resistor

AMETEK DTI-1000 TEMPERATURE INDICATOR

• One year accuracy to ½ 0.004°C
• System accuracy with STS Series temperature sensors to ½ 0.03°C
• Wide Temperature Range of -200 to 750°C (-328 to 1382°F)
• Resolution to 0.001°C

AMETEK RTC REFERENCE TEMPERATURE CALIBRATOR

• Contamination free calibration of clamp sensors
• ½Plug and Play½ intelligent reference sensors
• Easy-to-read color display with User-friendly navigation
• Lightweight and easy to carry