-
100 kHz to 2.2 GHz, 3 GHz, 4 GHz or 6 GHz Frequency ranges for the first RF path
-
Optional second RF path up to 2.2 GHz or 3 GHz
-
Up to two complete baseband paths
-
200 MHz RF I/Q modulator bandwidth
-
High output power up to +19 dBm (PEP), overrange + 26 dBm
-
2 x 2 MIMO with realtime fading possible
-
Lossless combination of baseband signals in the digital domain (e.g. for testing multistandard base stations)
-
Very low SSB phase noise of typ. -135 dBc (f = 1 GHz, 20 kHz carrier offset, 1 Hz measurement bandwidth), typ. -139 dBc with the enhanced phase noise performance option
-
Wideband noise of typ. -153 dBc (CW, f = 1 GHz, >10 MHz carrier offset, 1 Hz measurement bandwidth)
-
Excellent ACLR of typically +70 dB for 3GPP FDD
-
Very high level repeatability of 0.05 dB
-
High-stability reference oscillator as standard
-
Two instruments can be combined for 2 x 4 or 4 x 2 MIMO
-
Optional fading simulator with up to 40 fading paths
-
Support of EUTRA/LTE FDD and TDD signal generation
-
Support of WiMAX™ IEEE 802.16-2004/Corr1-2005, 802.16e-2005 and WiBro
-
Four code channels in realtime for 3GPP FDD, support of HSDPA and HSUPA
-
Mixed frames with GSM, EDGE and EGPRS2 slots in one frame (with same symbol rate per frame)
-
Baseband generator with universal coder for realtime signal generation
-
Arbitrary waveform generator with 16 Msamples, 64 Msamples or 128 Msamples
-
Arbitrary waveform generator supported by R&S®WinIQSIM2™ and R&S®WinIQSIM™ simulation software
-
Color display with 800 × 600 pixels (SVGA format)
-
Intuitive user interface with graphical display of signal flow (block diagram)
-
Graphical display of baseband signals through built-in transient recorder
-
Context-sensitive help system
-
Very short frequency and level setting times (<2 ms); only 450 µs in List mode
-
Electronic attenuator up to 6 GHz over the full level range
-
Flexible high speed measurements with RF List mode and multisegment waveforms
-
Minimum space required as two complete generators are accommodated in one instrument of only four height units
-
Optional digital I/Q input and output; support of R&S®EX-IQ-Box for flexible data formats and clock generation
-
Support of R&S®NRP power sensors
-
Remote control via LAN (Gigabit Ethernet, VXI11) and GPIB
-
Remote operation via Windows Remote Desktop or VNC
-
User-selectable trigger and marker signals
-
USB connectors for keyboard, mouse and memory stick
-
LXI class C compliance