Vacuum Bottle Tester for High Voltage Circuit Breaker test Vanguard VBT-60

Code: Vanguard VBT-60 / VBT-80


 

Datasheet PDF, 0.42 Mb
   

Description

  • Automatic Testing
  • 10 kV to 60 kV DC output in 5 kV steps
  • Selectable dwell time from 5 seconds to 2 minutes
  • Digital voltage and current display
  • Failure indicator lamp
  • Very light-weight

 

VBT-60/VBT-80

vacuum bottle testers

The VBT-60 and VBT-80 are microprocessor-based, portable, dc (60 kV and 80

kV, respectively) vacuum bottle testers. These lightweight, portable testers are

designed for testing circuit-breaker vacuum bottles in the fi eld and at the shop.

Test voltages can be selected from 10 kV dc to 60 kV dc in 5 kV steps for the

VBT-60 and from 10 kV to 80 kV dc in 5 kV steps for the VBT-80. The high-voltage

test time can be set from 5 seconds to 2 minutes. The test voltage is raised

to the selected voltage and held for the test time duration. After the test time

duration has elapsed and the leakage current did not pass the preset value of

100 µA, 200 µA, or 300 µA, the test voltage is returned to zero. If a fl ash-over

condition occurs, such as bottle failure, the test voltage is immediately turned

off, a "Failure" message is displayed on the LCD screen, and the "TEST FAIL" LED

light on the unit is also illuminated.

The presence of high voltage is indicated by an audible tone and an illuminated

"HIGH VOLTAGE" LED light. For additional operator safety, an "ARM" switch

must be held down during testing.

The VBT-60 and VBT-80 feature a back-lit LCD screen (16 characters by 2 lines)

that is viewable in both bright sunlight and low-light levels. A turn-and-press

knob is used to control the unit. An RS-232C interface port is provided for factory

calibration and diagnostic testing.

Each unit is furnished with a 10-foot test cable that is terminated with a quickdisconnect

test clip. A transportation case is also included.

 

Standard accessories

Part number VBT-60 VBT-60 and cables

Part number VBT-80 VBT-80 and cables

Part number VBT-HV-CABLE Hight Voltage Cable

 

More products VANGUARD

TRUE THREE-PHASE TRANSFORMER TURN RATIO TESTER VANGUARD TRI-PHASE

• Generates its own 3-phase transformer test voltage from single-phase AC or DC Power input
• Capable of detecting 130 different 3-phase transformer types defined by ANSI, IEC,
• 64 x 128 graphic LCD screen
• Store up to 128 transformer test-plans in Flash EEPROM
• Store up to 112 test records in Flash EEPROM
• Built-in USB Flash Drive Interface
• Computer Interface (RS-232C and USB Port)
• 4.5 Inch thermal printer
• Built-in transformer load tap changer

 

CURRENT TRANSFORMER TEST SET TURN RATIO, EXCITATION CURVE , SATURATION GRAPHIC VANGUARD EZCT-2000C PLUS

• Performs CT excitation, current-ratio, polarity, and phase angle tests
• Measures insulation resistance and winding resistance of the CT seconday windings
• Measures the CT's secondary burden
• Test record header information including company, substation name, circuit ID, manufacturer, CT serial number, operator name, and test record-comments
• Built-in 4.5-inch wide thermal printer
• Plot Multiple Saturation Curves
• Stores up to 128 CT test plans and 140 test records internally
• USB, Bluetooth, and USB Flash drive interface

 

AUTOMATIC THREE-PHASE TRANSFORMER TURN RATIO METER VANGUARD ATRT-03A

• Capable of detecting 130 different 3-phase transformer types defined by ANSI, IEC, and Australian standards plus phase shifting transformers
• Store up to 128 transformer test-plans in Flash EEPROM
• Store up to 112 test records in Flash EEPROM
• Built-in USB Flash Drive Interface
• Computer Interface (RS-232C and USB Port)
• 4.5 Inch thermal printer
• Built-in transformer load tap changer

 

THREE-PHASE TRANSFORMER WINDING RESISTANCE METER VANGUARD TRM-20

• accurately measure resistance from 1 micro-ohm to 2000 Ohms
• Perform three phase test on a transformer without the need to switch cables
• Can provide individual Delta winding resistance values
• Can provide individual Wye (with no neutral) winding resistance values
• Demagnetize transformer after test
• Selectable test current from 1A to 20A
• Computer control via RS-232C, USB, or Bluetooth interface
• Built-in 2.5" wide thermal printer

 

600A AC PRIMARY CURRENT INJECTION SOURCE FOR RELAY TESTING VANGUARD PCI-600

• Results displayed on a 4-line by 20-character backlit LCD
• Test currents from 10 to 600 amperes AC
• Also has an external-current input (0-10 A)
• timer reading range 1 m.. 2 hours

 

CAPACITIVE VOLTAGE TRANSFORMER TURN RATIO TESTER VANGUARD CVT-765

• Standalone or computer-controlled
• Can test CVT's rated up to 765 KV
• Displays turns-ratios from 75-15,000
• Calculates turns-ratio percentage error when nameplate voltages are provided

 

EHV HIGH VOLTAGE CIRCUIT BREAKER ANALYZER VANGUARD DIGITMR

• dry-contact inputs 3 dry-contact channels
• timing windows 1 second, 10 seconds, or 20 seconds
• timing resolutions ±50 micro-seconds @ 1 sec. duration
• Stand-alone, microcomputer-driven EHV Circuit Breaker Analyzer
• Analyzes contact time, stroke, velocity, over-travel, and contact wipe
• USB PC interface & USB Flash drive interface
• Built-in thermal printer

 

VACUUM BOTTLE TESTER FOR HIGH VOLTAGE CIRCUIT BREAKER TEST VANGUARD VBT-60

• Automatic Testing
• 10 kV to 60 / 80 kV DC output in 5 kV steps
• Selectable dwell time from 5 seconds to 2 minutes
• Digital voltage and current display
• Failure indicator lamp
• Very light-weight

 

THREE-PHASE TRANSFORMER WINDING RESISTANCE METER VANGUARD TRM-20

• accurately measure resistance from 1 micro-ohm to 500 Ohms
• Perform three phase test on a transformer without the need to switch cables
• Can provide individual Delta winding resistance values
• Can provide individual Wye (with no neutral) winding resistance values
• Demagnetize transformer after test
• Selectable test current from 1A to 40A
• Computer control via RS-232C, USB, or Bluetooth interface
• Built-in 2.5" wide thermal printer

 

DC CIRCUIT BREAKER CONTACT LOW RESISTANCE MICROOHMMETER 200A VANGUARD DMOM-200 S3

• 1 to 200A programmable test current
• Resitance range: 1µ?..10m? at 200A to 1µ?..5? at 1A
• Very lightweight: 19.8 lbs. (8.9 Kg)
• Measures circuit breaker contact resistance with safety ground on (with the Dual Ground option)
• Stores test records on-board or on external USB Flash drive
• Built-in 2.5" wide thermal printer