The compact magnetic field generator and analyzer MGA 1030 allows susceptibility tests against magnetic fields from DC to 250 kHz according the standard EN 55103-2 and there measurement according to EN 55103-1.
In addition, EMC tests are possible according to various standards such as automotive, avionic and MIL-STD.

• Construction
  The MGA 1030 contains three independent modules:
  - Signal generator DC - 250 kHz
  - Power amplifier max. 800 W
  - Spectrum analyzer 16 Bit
  All three units can also be used as "stand-alone" devices
• Full automatic testing
  In combination with a Triax-Helmholtz coil can be tested EUT in 3 axis without rotating the EUT. Magnetic field strenghts up to 1000 A/m at frequencies from DC to 1 kHz are possible. Smaller field strenghts can be achieved up to 250 kHz

• Calibration of a Helmholtz coil
  In combination with a loop sensor (RLS 133 or LS 133), the Helmholtz coil can be calibrated. It can also custom coils are used. A calibration routine in the software of the MGA 1030 allowed linking of additional test agents.

• Self-calibration 
  Using an ultra-stable voltage source self-calibration correction values are stored in an internal EEPROM. Any voltage signal or voltage measurement device is calibrated as a self-calibration process automatically in about a minute.

Features:

• Generation of magnetic fields from DC to 250 kHz
• Field strenght up to 1000 A/m
• EN 55103-1/2, MIL-STD 461, Automotive etc.
• Accessories: Loop sensors, Helmholtz coils etc.