The ESD Simulator SESD 216 is suitable for performing EMC tests on systems in accordance with the standard IEC / EN 61000-4-2 (ESD test). Higher test levels can be set far beyond the standard limits. Depending on the test object and test setup, two test methods are to be used:

1.      Air discharge In this case, the pulse is triggered by approaching the SESD 216 towards the DUT. The high voltage applied to the discharge electrode is discharged suddenly, resulting in a very broadband highfrequency interference spectrum. This in turn can lead to influences on the test specimens.

Features:

• IEC 61000-4-2 (150 pF / 330 Ohm)
• Battery or mains operation
• 16,5 kV AIR / 10 kV CONTACT discharge
• Programmable automatic test runs
• Predefined test levels acc. to the standard
• Contact control for contact discharge
• Displaying of the real discharge voltage at air mode
• Counter mode with and without automatic polarity change