The DT-212 is a DVB-T to DVB-T (COFDM) transmodulator. It has a direct COFDM input that can be tuned to any multiplex and ouput in the UHF band. They are agile in frequency and output level.

This module allows to regenerate the quality of the multiplex when received from a noisy source. It is also interesting to change the input channel to another channel with total quality preservation.

RF INPUTS Connector	2 independent DVB-T inputs BNC-Type female, Impedance 75 ?
RF OUTPUT Connector	2 combined independent DVB-T multiplexes F-Type female, Impedance 50 ?
TS PROCESSING Filtering Measurements	PID Filtering with Filtering Table up to 32 PID Bitrate of the Output Multiplex Percentage of used bitrate relative to the maximum capacity of the multiplex
CONFIGURATION AND POWER SUPPLY	Through the DT-800 control and power supply unit. Control can be made remotely from a PC

Recommended options

DT-800B	Control unit and power supply.
DT-802	Control unit and redundant power supply modules.
DT-900	Rack and wall mounted structure.
DT-900B	Rack mounted structure.
DT-901	Empty module plates..
DT-902B	Power CAM modules for smart cards..
CC-043	Supply and control cable with 3 connexions for DT-800B (included)
CC-044	Supply and control cable with 4 connexions for DT-800B (included)
CC-143	Supply and control cable with 3 connexions for DT-802 (included)
CC-144	Supply and control cable with 4 connexions for DT-802 (included)
OP-XXX-V	Output in the range 170-650 MHz for modules with DVB-T..
OP-800-P	Option required to use DT-800B with 3 x DT-730 modules
OP-212-D	Dual independent output for DT-212B
OP-504-S	TS-ASI output option for DT-504B

	RECEIVERS WITH ASI-TS OUTPUT
DT-302	Dual DVB-S/S2 receiver with CAM, ASI-TS output.
DT-312	Dual DVB-T receiver, ASI-TS output.
DT-324-M	IP receiver to ASI-TS output (MPTS).
DT-324-S	IP receiver to ASI-TS output (SPTS).

	IP STREAMERS
DT-421-M	IP Streamer. ASI-TS inputs, IP output (MPTS)
DT-421-S	IP Streamer. ASI-TS inputs, IP output (SPTS)

	COMBINERS - AMPLIFIERS
DT-700	4x1 quadruple DVB-T combiner .
DT-710	8 input DVB-T combiner with a 117 dBuV (+10 dBm) one single output.
DT-722	4 input DVB-T combiner with a 129 dBuV / 250 mW (+22 dBm) one single output.
DT-730	DVB-T amplifier with a 137 dBuV / 1 W (+30 dBm).
DT-610	Optical transmitter module
DT-620	Optical receiver module

More products PROMAX

MODULATOR ASI-TS MPEG -> ISDB-T/TB PROMAX MO-370

• -T and ISDB-TB modulator contained in a 19" 1U chassis
• inputs can be used to modulate the COFDM signal
• TS MPEG INPUT: 2x ASI
• RF OUTPUT: 45-875 MHz (1 Hz steps), approx. 80 dBµV power

EDUCATIONAL TRAINING SYSTEM FOR OPTICAL FIBER COMMUNICATIONS PROMAX EF-970

• EMITTER KIT: Two independent channels, with LED and laser-photoemitters. 8 inputs, BF generator, miliammeter
• RECEIVER KIT: calibrated optic power meter
• principles of transmission through Fibre Optics
• latest tendencies like LASER and WDM systems

TRAINING SYSTEM FOR TERRESTRIAL, CABLE, SATELLITE TV TRANSMISSION PROMAX EA-817A

• Antenna Trainer fully configurable trainer, based on a structure with whiteboard panels
• install, configure, adjust, modify and analyse any kind of actual MATV and SMATV installation
• MATV (Master Antenna Television) Digital
• SMATV (Satellite Master Antenna Television) Digital

RADIO & DIGITAL TV MONITORING, DETECTION, MEASUREMENT SYSTEM PROWATCH DEIDE3

• Detection of radio signals received in a specific location, in the radio as well as in the digital and analogue television bands
• Identification of each one of the signals received
• Permanent monitoring of a variable area of the radio spectrum, carrying out an analysis of the detected variation
• digital radio (DAB), terrestrial digital television (TDT) according to the DVB-T (COFDM modulation) standard, FM-RDS radio and analogue TV signals

DIGITAL SATELLITE RECEIVER DVB-S/S2 -> ASI-TRANSPORT STREAM PROMAX DT-302

• DVB-S/S2 IF INPUT: 2 independent DVB-S/S2 inputs
• TS OUTPUT: 2 double independent DVB-ASI outputs
• allows inserting a Conditional Access Module (CAM)
• Selection of decrypted services by name

PROMAX-12 CABLE TV QAM ANALYSER RADIO FM MATV MMDS

• FROM 5 TO 1005 MHz
• BER & MER ON QAM DIGITAL SIGNALS
• MULTISTANDARD: 16/32/64/256 QAM ANNEX A/B/C QPSK
• ANALOGUE CHANNELS
• DIGITAL CHANNELS
• BROADBAND POWER DETECTION
• SCAN

COLOR VIDEO SIGNAL PATTERN GENERATOR PAL/ NTSC/ SECAM PROMAX GV-198

• PAL B/G, D/K, I, N, NTSC M, SECAM B/G, D/K, L Standards
• Direct acces keys for nine different chars
• 4:3 & 16:9 formats
• Addition of an electronic circle
• Double side band modulation

TRANSMODULATOR DVB-T -> DVB-T PROMAX DT-212

• RF INPUTS: 2 independent DVB-T inputs
• RF OUTPUT: 2 combined independent DVB-T multiplexes
• PID Filtering with Filtering Table up to 32 PID
• direct COFDM input that can be tuned to any multiplex
• ouput in the UHF band
• regenerate the quality of the multiplex when received from a noisy source
• change the input channel to another channel with total quality preservation

COFDM MODULATOR DVB-ASI/ SPI -> DVB-T PROMAX MO-160/161

• MPEG-2 TS INPUT: 2x DVB-ASI, 1x DVB-SPI
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475-875 MHz (45-875 MHz for MO-161 model)
• CONSTELLATIONS: QPSK, 16QAM, 64QAM

SELECTIVE OPTICAL FIBER POWER METER FTTX-XPON PROMAX PROLITE-67

• Attenuation test nd OLTS Functions
• LOSSES Function
• LOGGER Function
• Visual locator to find faults in the fibre
• Red laser at 650 nm with an universal connector
• User interface in several languages
• Connection USB to PC to transfer the data recorded by the instrument