MI 3102H CL EurotestXE 2,5 kV is the multifunctional measuring instrument which apart from all the necessary functions for complete installation safety testing according to IEC/EN 61557 performs insulation resistance measurement with the test voltage up to 2.5 kV (reading is up to 10 G?) and enables diagnostic test by PI and DAR indexes calculation.

MEASURING FUNCTIONS

Insulation resistance with DC voltage
PI, DAR calculation
Continuity of PE conductors with 200 mA test current with polarity change
Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping
Line impedance
Loop impedance
Loop impedance with Trip Lock RCD function
TRMS voltage and frequency
Phase sequence
RCD testing (general and selective, type AC, A)
Earth resistance (3-wire and 2 clamps methods)
TRMS leakage and load currents (option)
Illumination (option)

OTHER FEATURES

Wide range of insulation test voltages from 100 V to 2500 V, reading up to 10 GO.
Insulation diagnostics: Polarisation Index (PI) and Dielectric Absorption Ratio (DAR) calculation.
Built-in help screens for referencing on site.
Built-in fuse tables for automatic evaluation of the line / loop impedance result.
Monitoring of all 3 voltages in real-time.
Automatic polarity reversal on continuity test.
Loop impedance test without tripping the RCD.
Built-in charger and rechargeable batteries as standard accessory.
Automated RCD testing procedure.
PC SW Eurolink PRO for downloading of test results and report creation.

SOFTWARE

PC SW EuroLink PRO is a strong creating tool of professional Visual Inspection Report and Testing Result Report.

TECHNICAL DATA

Dimensions (w x h x l): 230 x 103 x 115 mm

Mass (without accessories): 1.3 kg

Standard accessories

MI 3102H CL Standard set MI 3102H CL

Instrument EurotestXE 2,5 kV
Tip commander, 1.5 m
Schuko-plug test cable
2.5 kV test lead, 2 x 1.5 m
Test lead, 3 x 1.5 m
Earth test set (test lead, 4 m; 2 x test lead, 20 m; 2 x test rod)
Power supply adapter + 6 NiMH rechargeable batteries, type AA
PC Software EuroLink PRO
Test probe, 3 pcs (blue, black, green)
Crocodile clip, 3 pcs (blue, black, green)
RS232 - PS/2 cable
USB cable
Soft carrying neck belt
Soft carrying bag
Short instruction manual
Instruction manual on CD
Handbook on CD
Calibration certificate

More products METREL

METREL MD9035 HANDHELD MULTIMETER FOR INDUSTRY MAINTENANCE AND REPAIR SERVICE LABORATORY MD-9030

• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 400O..40MO Resistance measurement;
• 500nF..3mF Capacitance measurement;
• 50Hz..1MHz Frequency Measurement

METREL MI2093 LINE TRACER FUSE FINDING INSTALLATION TESTER FOR UNDER-WALL CABLES

• Field proven instrument for under-wall low voltage installation tracing
• fuse finding
• short-circuit spot determination and metal installation tracing
• Can be used on energized or voltage-free systems.
• Tips and detailed descriptions of connection schemes for various combinations from everyday practice.

METREL MD9035 AUTOMOTIVE DIGITAL MULTIMETER MD-9035

• Both IP (inductive) & IG (contact) RPM;
• ms Fuel-injection on time;
• % Duty cycle;
• Dwell angle;
• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 6uF..2mF Capacitance measurement;
• 600O..60MO Resistance measurement;
• Electric field detection;
• Temperature measurement(thermocouple type K included)

VARIABLE TRANSFORMER SINGLE OR THREE PHASE PORTABLE OR DESKTOP METREL

• Single-phase Built-in Variable Auto-Transformers
• Three-phase Built-in Variable Auto-Transformers
• Motor driven Variable Transformers
• Desk top Variable Transformers

RESIDENTIAL ELECTRICAL INSTALLATION SIMULATOR METREL MI 2166 DEMO

• Simulation of common electrical installation usually met in an individual house or apartment
• Various test methods supported by different test instruments can be presented.
• Acceptable or faulty parameters can be preset by five »fault� switches.
• Some real elements of electrical installation are placed on the front panel like RCD protection device, ON/OFF switch

METREL MI3310A SIGMAGT SAFETY ANALYZER FOR PORTABLE ELECTRICAL EQUIPMENT

• Earth bond / continuity resistance (200 mA, 10 A)
• Insulation resistance
• Insulation resistance of isolated accessible conductive parts
• Substitute leakage current
• Substitute leakage current of isolated accessible conductive parts
• Differential leakage current
• Touch leakage current
• IEC cord polarity test

METREL MI3310 SIGMAGT SAFETY ANALYZER FOR PORTABLE ELECTRICAL EQUIPMENT

• Earth bond / continuity resistance (200 mA)
• Insulation resistance
• Insulation resistance of isolated accessible conductive parts
• Substitute leakage current
• Substitute leakage current of isolated accessible conductive parts
• Differential leakage current
• Touch leakage current
• IEC cord polarity test

METREL MI3304 BETAGT PLUS ELECTROSECURITY SAFETY ANALYZER FOR PORTABLE EQUIPMENTS CF. IEC EN VDE STANDARD

• Continuity tests (200 mA, 4 A, 10 A, 25 A).
• Insulation resistance.
• Substitute leakage current.
• Differential leakage current.
• Touch leakage current.
• IEC cord polarity test.
• Leakage and load TRMS current measurement with current clamp.

METREL MI3110 ELECTRICAL INSTALLATIONS TESTER FOR IT EARTHING SYSTEMS EUROTEST IM MI-3110

• IT System recognizing, Voltage Range and Voltage Balance;
• ISFL Single Fault Leakage current from Phase 1 and Phase 2 to PE;
• Fuse Trip-out Ability Evaluation, Line Impedance and Ipsc Prospective Short Circuit Current;
• IMD Insulation / ELM Earth Leakage / RCM Residual Current Monitor Devices Control;
• Alarm Trigger or Trip-Out Check and Adjust.

METREL MD9040 PORTABLE DIGITAL INDUSTRIAL MULTIMETER MD9040

• CAT IV/1000 V overvoltage category
• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 60nF..25mF Capacitance measurement;
• 600O..60MO Resistance measurement;
• Diode test;
• 5Hz..1MHz Frequency of digital signals measurement