The MD 9060 ranks among the most accurate multimeters with a large bandwidth and very high resolution. Metrel MD 9060 is equipped with a built-in VFD feature that makes the instrument capable of measuring the true values in accordance with frequency, large 2-line 500.000 counts LCD display, fast data acquisition and transfer (via optical interface), CAT IV / 1000 V, TRMS current and voltage measurement, conductance measurement and fast one-handed operation. MD 9060 has a wide range of extra features, including data hold, memory, min / max, average, differential, peak, peak / peak with extra fast 1ms response time, auto power off, frequency filter, reset and relative function. The MD 9060 is the ideal choice for demanding measurement tasks in industry, in the laboratories and in everyday repair and maintenance practice.

TEST FUNCTIONS

TRMS AC, DC voltage measurement;
TRMS AC, DC current measurement;
Capacitance measurement;
Resistance measurement;
Diode test;
Mains supply frequency measurement;
Frequency of digital signals measurement;
Continuity test (acoustic signaling);
Conductance measurement;
Temperature measurement.

TECHNICAL DATA

Dimensions (w x h x l): 103 x 64,5 x 208 mm

Mass (without accessories): 635 g

Standard accessories

MD 9060 Standard set

Multimeter MD 9060 with rubber holster
Test lead with probe, 2 pcs
Thermocouple probe, type K
9 V battery,
Instruction manual
Warranty

More products METREL

PRECISION CURRENT CLAMP METER TRUE RMS METREL MD 9250

• meets overvoltage category CAT IV 1000 V
• TRMS AC, DC voltage measurement;
• TRMS AC, DC current measurement;
• Capacitance measurement;
• Resistance measurement;
• Diode test;
• Frequency measurement;
• Electric field detection;
• Continuity test (acoustic signaling);
• Temperature measurement.

METREL MI3250 PRECISION RESISTANCE MICROOHMMETER 10A

• Bidirectional resistance measurement from 0,1 µO up to 2000 O
• test current up to 10 A
• Highly efficient 10 A current source generates 10 A into 200 mO load for 15 min without overheating
• High overvoltage protection (CAT IV / 300 V)
• Custom limits can be set for PASS / FAIL evaluation of test result.
• 50 Hz / 60 Hz ripple detection and rejection.
• Instrument can be powered from mains or internal rechargeable battery.
• Up to 1000 test results with timestamp can be stored in internal memory.
• PC SW HVLink PRO enables downloading, review, analyses and printing of test results.

METREL MI3110 ELECTRICAL INSTALLATIONS TESTER FOR IT EARTHING SYSTEMS EUROTEST IM MI-3110

• IT System recognizing, Voltage Range and Voltage Balance;
• ISFL Single Fault Leakage current from Phase 1 and Phase 2 to PE;
• Fuse Trip-out Ability Evaluation, Line Impedance and Ipsc Prospective Short Circuit Current;
• IMD Insulation / ELM Earth Leakage / RCM Residual Current Monitor Devices Control;
• Alarm Trigger or Trip-Out Check and Adjust.

METREL MI2093 LINE TRACER FUSE FINDING INSTALLATION TESTER FOR UNDER-WALL CABLES

• Field proven instrument for under-wall low voltage installation tracing
• fuse finding
• short-circuit spot determination and metal installation tracing
• Can be used on energized or voltage-free systems.
• Tips and detailed descriptions of connection schemes for various combinations from everyday practice.

WINDING TRANSFORMER RESISTANCE MICROOHMMETER 2A METREL MI 3242

• Bidirectional resistance measurement from 1 µO up to 199,9 O
• test current up to 2 A
• High overvoltage protection (CAT III / 600 V)
• Internal protection cicuit
• 50 Hz / 60 Hz ripple detection and rejection.
• more than 800 measurements of 500 mO load 8 2 A test current & 15 s measurement duration
• Pre-programmed limits with PASS/FAIL evaluation of measurement result
• Up to 1500 test results with timestamp can be stored in internal memory.
• PC SW HVLink PRO enables downloading, review, analyses and printing of test results.

LOW CURRENT LEAKAGE CLAMP METER METREL MD 9270

• TRMS AC voltage and current measurement.
• Frequency measurement.
• Power: measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement).
• Intelligent loss analysis: complex algorithms detect loss and allow determining possible reasons for current loss.
• Harmonics: measures current or voltage harmonic components and a percentage value of a harmonic up to the 49th.
• Total Harmonic Distortion (THD)
• Power Factor (PF).

METREL MI3101 MEGOHMMETER FOR INSULATION RESISTANCE, CONTINUITY, GROUNDING TEST EUROTEST AT

• DC insulation resistance,
• PE conductor continuity test,
• Line and Loop resistances with Fuse evaluation table built-in, RCD test with Trip lock function,
• phase sequence in 3-phase systems,
• on-line voltage monitor,
• 2-wire and 3-wire Earth resistance test with built-in battery operated generator.

METREL MD9035 HANDHELD MULTIMETER FOR INDUSTRY MAINTENANCE AND REPAIR SERVICE LABORATORY MD-9030

• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 400O..40MO Resistance measurement;
• 500nF..3mF Capacitance measurement;
• 50Hz..1MHz Frequency Measurement

DEMONSTRATION BOARD FOR SHOWING ELECTRICAL SWITCHBOARD IN SINGLE AND THREE-PHASE SYSTEMS METREL MI 3099 DEMO

• Switchboard and on Circuit side
• supporting one and three phase system
• RCD can be simulated
• TN-C(S) or TT type of earthing system on electrical installation

TRANSFORMER RESISTANCE MICROOHMMETER 10A METREL MI 3250