Source and sink (programmable load) 100fA to 100mA
10¹⁴O output impedance ensures stable current sourcing into variable loads
65000-point source memory allows executing comprehensive test current sweeps directly from the current source
Built-in RS-232, GPIB, Trigger Link, and digital I/O interfaces
Reconfigurable triax output simplifies matching the application's guarding requirements
Model 220 emulation mode eliminates need to reprogram existing applications
Source AC currents from 2pA to 100mA for AC characterization of components and materials
The 6221's 10MHz output update rate generates smooth sine waves up to 100kHz
Built-in standard and arbitrary waveform generators with 1mHz to 100kHz frequency range. Applications include use as a complex programmable load or sensor signal and for noise emulation
Programmable pulse widths as short as 5µs, limiting power dissipation in delicate components. Supports pulsed I-V measurements down to 50µs when used with Model 2182A Nanovoltmeter
Built-in Ethernet interface for easy remote control without a GPIB controller card

More products KEITHLEY

DATA ACQUISITION CARD PCI 16-CHANNELS 400KSA/S KEITLHEY KPCI-3104

• 12-bit resolution
• Throughput of up to 400kS/s
• Digital I/O scanning speeds of up to 3MHz
• 16 single-ended or 8 differential analog inputs
• 23 digital I/O lines
• 2 analog outputs

LOW CURRENT PHOTODIODE PICOAMMETER 2 CHANNLES KEITHLEY 2502

• Dual-channel instrument for optical power measurements, beam measurements, and nanoscale materials and device research
• ±100V source for bias requirements
• Measure photodetector current from 1fA to 20mA
• 1fA current measurement resolution

ELECTROMETER HIGH RESISTANCE METER KEITHLEY 6517B

• Measures resistances up to 10000TO
• 1fA - 20mA current measurement range
• <20 µV burden voltage on lowest current ranges
• 200 TO input impedance

PICOAMMETER AND VOLTAGE SOURCE 5.5 DIGIT KEITHLEY 6487

• 10fA resolution
• 5-1/2 digit resolution
• <200µV burden voltage
• measure currents from 20fA to 20mA
• source voltage from 200µV to 505V

KEITHLEY 6514 6517B 6430 ELECTROMETER LOW CURRENT HIGH RESISTANCE

• Choose from three sensitive electrometers for precision high resistance and low current measurements.

DIGITAL PRECISION MULTIMETER 7.5 DIGIT KEITHLEY DMM 2010

• 7.5 digit resolution
• 100nV rms noise floor
• 7ppm DCV repeatability

PCI BOARD DIGITAL I/O 16-CHANNELS OPTICALLY ISOLATED KEITHLEY KPCI-PDISO8A

• 16 optically isolated solid-state relays and digital inputs
• Direct, non-polarized switching and sensing: DC up to 60VDC, AC up to 30Vrms
• High load current capability up to 350mA

KEITHLEY 2002 8.5-DIGIT PRECISION MULTIMETER

• 0.0006% DCV accuracy (one year)
• 1nV, 100nΩ, and 10pA sensitivity
• DC in-circuit current and 15MHz frequency measurement

KEITHLEY 2182A NANOVOLTMETER

• The two-channel Model 2182A Nanovoltmeter is optimized for making stable, low noise voltage measurements and for characterizing low resistance materials and devices reliably and repeatably

PULSE PATTERN GENERATOR 165 MHZ KEITHLEY 3401-F / 3401-R

• 1 mHz - 165 MHz frequency output range
• 1 channel
• 3 ns - 1000 s pulse width range
• 10 V amplitude into 50 O, 20 V into 1 k O